{"title":"Boat Outfitting","description":"\u003cp\u003eBoat outfitting gear to rig your boat right. Shop jack plates, foot throttles, boarding ladders, Fortress anchors, TACO Marine leaning posts and shade poles, and kayak accessories.\u003c\/p\u003e","products":[{"product_id":"t-h-marine-atlas-micro-jacker-4-hydraulic-jack-plate","title":"T-H Marine ATLAS Micro Jacker Hydraulic Jack Plate, 4\" Setback, Up to 115 HP","description":"\u003cp\u003eThe T-H Marine ATLAS® Micro Jacker is the smallest and lightest hydraulic jack plate on the market, built for small outboards up to 115 HP and 425 lbs. It weighs just 23 lbs, lifts in about 8 seconds and gives you push-button height control. You can run skinny water with confidence in Gheenoes, river runners, jon boats and skiffs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Outboard:\u003c\/strong\u003e 115 HP \/ 425 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Lift:\u003c\/strong\u003e 5”, Lifts in ~8 Seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Only 23 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePush-Button Hydraulic Lift\u003c\/h3\u003e\n\u003cp\u003eRaise the motor on the fly to clear shallow flats, stumps and sandbars, then drop it back down for full bite. The Micro Jacker lifts its full travel in about 8 seconds, so you can get out of trouble fast.\u003c\/p\u003e\n\u003ch3\u003eSelf-Contained Hydraulics\u003c\/h3\u003e\n\u003cp\u003eA factory-tested high-speed hydraulic actuator is built into the plate. There are no separate pumps, reservoirs or hoses to mount and plumb.\u003c\/p\u003e\n\u003ch3\u003eSmall, Light Footprint\u003c\/h3\u003e\n\u003cp\u003eAt only 14-5\/8” wide and 11-1\/2” high and weighing 23 lbs, the Micro Jacker fits tight transoms and adds minimal weight to small boats.\u003c\/p\u003e\n\u003ch3\u003eAbout 8.5” of Total Height Adjustment\u003c\/h3\u003e\n\u003cp\u003eWith the Micro Jacker installed you have about 8.5” of height range to work with. That is 1.5” of adjustment at the transom, 1.0” on the motor side, 1.0” with the motor and 5” of hydraulic lift.\u003c\/p\u003e\n\u003ch3\u003eClamp-On Motor Adapter Available\u003c\/h3\u003e\n\u003cp\u003eSmaller outboards with clamp-on brackets do not use the standard bolt pattern. The optional Clamp-On Motor Adapter (AHJM-CMA-DP), sold separately, lets them mount to the Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eCheck Your Outboard Before Ordering\u003c\/h3\u003e\n\u003cp\u003eConfirm your outboard is no more than 115 HP and 425 lbs dry weight. T-H Marine notes that Honda’s 115 HP outboard exceeds the weight limit and cannot be used. A position gauge is not available for the Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × T-H Marine ATLAS® Micro Jacker 4” Hydraulic Jack Plate (AHJM-4-DP)\u003c\/li\u003e\n\u003cli\u003eClamp-on motor adapter (AHJM-CMA-DP) sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATLAS® Micro Jacker™\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eAHJM-4-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHydraulic Jack Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e4”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Lift\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Height Range\u003c\/td\u003e\n\u003ctd\u003eAbout 8.5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Time\u003c\/td\u003e\n\u003ctd\u003eAbout 8 Seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Outboard Weight\u003c\/td\u003e\n\u003ctd\u003e425 lbs (Dry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Outboard Power\u003c\/td\u003e\n\u003ctd\u003e115 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e14-5\/8”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11-1\/2”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e23 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Fluid\u003c\/td\u003e\n\u003ctd\u003eISO100 or SAE 20\/30 Non-Detergent Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGauge Compatibility\u003c\/td\u003e\n\u003ctd\u003eNot Available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572073201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194412089457,"sku":"THM-AHJM-4-DP","price":1563.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-micro-jacker-4-hydraulic-jack-plate_07c6f011-0be9-48fe-b193-db53e44de6af.jpg?v=1794789229"},{"product_id":"t-h-marine-z-lock-12-setback-manual-jack-plate","title":"T-H Marine Z-Lock 12\" Setback Manual Jack Plate, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock™ 12” Setback Manual Jack Plate gives your outboard the maximum 12\" setback and 5” of vertical adjustment in a rock-solid manual design. Built from full 1\/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 12”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Rating:\u003c\/strong\u003e Up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/2” Aircraft-Grade Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eZ-Lock Design Stops Side Slippage\u003c\/h3\u003e\n\u003cp\u003eMatching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.\u003c\/p\u003e\n\u003ch3\u003eWhy a 12” Setback\u003c\/h3\u003e\n\u003cp\u003eThe 12\" setback is the longest in the Z-Lock line. It delivers maximum leverage for performance hulls that need a strong holeshot and top-end speed, all without the weight and cost of a hydraulic system.\u003c\/p\u003e\n\u003ch3\u003eSingle-Bolt Adjustment From the Top\u003c\/h3\u003e\n\u003cp\u003eEngine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.\u003c\/p\u003e\n\u003ch3\u003e5” of Vertical Adjustment\u003c\/h3\u003e\n\u003cp\u003eRaise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Big Motors\u003c\/h3\u003e\n\u003cp\u003eFull 1\/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Setback\u003c\/h3\u003e\n\u003cp\u003eTalk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Z-Lock™ 12” Setback Manual Jack Plate (JPZ-12-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZ-Lock™ Manual Jack Plate - 12” Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJPZ-12-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eManual, Single Adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e12”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Adjustment\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSingle Bolt, From Top of Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/2” Aircraft-Grade Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rating\u003c\/td\u003e\n\u003ctd\u003eV6 \u0026amp; V8 Outboards up to 300 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572080650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194412351601,"sku":"THM-JPZ-12-DP","price":1067.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-z-lock-12-setback-manual-jack-plate_0906d324-9ba5-4b7b-8cf6-ab51957c873f.jpg?v=1794789232"},{"product_id":"t-h-marine-atlas-jack-plate-replacement-actuator","title":"T-H Marine ATLAS Jack Plate Replacement Actuator, Post-March 2014","description":"\u003cp\u003eThe T-H Marine Replacement Actuator (AHJACT-3-DP) is the genuine factory hydraulic actuator for ATLAS® hydraulic jack plates manufactured after March 2014. It bolts straight in to get a slow, leaking or failed jack plate lifting like new, so you don’t have to replace the whole plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ATLAS® Jack Plates Made After March 2014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Complete Hydraulic Actuator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Housing:\u003c\/strong\u003e Plastic (Post-2014 Style)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e AHJACT-3-DP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGenuine ATLAS Replacement\u003c\/h3\u003e\n\u003cp\u003eThis is the OEM actuator T-H Marine builds into its post-March 2014 ATLAS jack plates. Fit, stroke and wiring match the original.\u003c\/p\u003e\n\u003ch3\u003eDesigned for Field Replacement\u003c\/h3\u003e\n\u003cp\u003eThe ATLAS jack plate was designed so the actuator can be swapped in the field. Replacing the actuator is far more cost-effective than replacing the entire jack plate.\u003c\/p\u003e\n\u003ch3\u003eSelf-Contained Hydraulics\u003c\/h3\u003e\n\u003cp\u003eThe electric motor, pump, reservoir and hydraulic ram are one sealed assembly, so there are no separate pumps or hoses to plumb.\u003c\/p\u003e\n\u003ch3\u003eConfirm Your Jack Plate Date\u003c\/h3\u003e\n\u003cp\u003eThis actuator is only for ATLAS jack plates made after March 2014, which use the plastic motor housing. Earlier plates with a metal motor housing use a different actuator, so check your plate before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Replacement Actuator for ATLAS® Jack Plates, Post March 2014 (AHJACT-3-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReplacement Actuator for ATLAS® Jack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eAHJACT-3-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eATLAS® Hydraulic Jack Plates Made After March 2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Housing\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003ePre-March 2014 ATLAS® Plates (Metal Motor Housing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e11 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572083200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194412580977,"sku":"THM-AHJACT-3-DP","price":1062.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-jack-plate-replacement-actuator_154055db-73c7-4148-8612-0d64a07fc4f6.jpg?v=1794789237"},{"product_id":"t-h-marine-z-lock-10-setback-manual-jack-plate","title":"T-H Marine Z-Lock 10\" Setback Manual Jack Plate, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock™ 10” Setback Manual Jack Plate gives your outboard a performance 10\" setback and 5” of vertical adjustment in a rock-solid manual design. Built from full 1\/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 10”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Rating:\u003c\/strong\u003e Up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/2” Aircraft-Grade Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eZ-Lock Design Stops Side Slippage\u003c\/h3\u003e\n\u003cp\u003eMatching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.\u003c\/p\u003e\n\u003ch3\u003eWhy a 10” Setback\u003c\/h3\u003e\n\u003cp\u003eA 10\" setback is built for boaters chasing more speed and a faster holeshot. Moving the prop well back from the transom lets you run the engine higher, cut drag and find your hull's sweet spot.\u003c\/p\u003e\n\u003ch3\u003eSingle-Bolt Adjustment From the Top\u003c\/h3\u003e\n\u003cp\u003eEngine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.\u003c\/p\u003e\n\u003ch3\u003e5” of Vertical Adjustment\u003c\/h3\u003e\n\u003cp\u003eRaise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Big Motors\u003c\/h3\u003e\n\u003cp\u003eFull 1\/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Setback\u003c\/h3\u003e\n\u003cp\u003eTalk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Z-Lock™ 10” Setback Manual Jack Plate (JPZ-10-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZ-Lock™ Manual Jack Plate - 10” Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJPZ-10-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eManual, Single Adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e10”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Adjustment\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSingle Bolt, From Top of Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/2” Aircraft-Grade Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rating\u003c\/td\u003e\n\u003ctd\u003eV6 \u0026amp; V8 Outboards up to 300 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572070804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194431815793,"sku":"THM-JPZ-10-DP","price":865.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-z-lock-10-setback-manual-jack-plate_87ecbde8-98f4-4331-8af2-9236209b199e.jpg?v=1794789359"},{"product_id":"t-h-marine-z-lock-8-setback-manual-jack-plate","title":"T-H Marine Z-Lock 8\" Setback Manual Jack Plate, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock™ 8” Setback Manual Jack Plate gives your outboard an 8\" setback and 5” of vertical adjustment in a rock-solid manual design. Built from full 1\/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 8”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Rating:\u003c\/strong\u003e Up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/2” Aircraft-Grade Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eZ-Lock Design Stops Side Slippage\u003c\/h3\u003e\n\u003cp\u003eMatching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.\u003c\/p\u003e\n\u003ch3\u003eWhy an 8” Setback\u003c\/h3\u003e\n\u003cp\u003eAn 8\" setback pushes the prop further behind the transom into cleaner, less aerated water. The extra leverage helps the bow come up and the hull get on plane, which is a popular upgrade for heavier-loaded bass and bay boats.\u003c\/p\u003e\n\u003ch3\u003eSingle-Bolt Adjustment From the Top\u003c\/h3\u003e\n\u003cp\u003eEngine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.\u003c\/p\u003e\n\u003ch3\u003e5” of Vertical Adjustment\u003c\/h3\u003e\n\u003cp\u003eRaise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Big Motors\u003c\/h3\u003e\n\u003cp\u003eFull 1\/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Setback\u003c\/h3\u003e\n\u003cp\u003eTalk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Z-Lock™ 8” Setback Manual Jack Plate (JPZ-8-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZ-Lock™ Manual Jack Plate - 8” Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJPZ-8-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eManual, Single Adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e8”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Adjustment\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSingle Bolt, From Top of Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/2” Aircraft-Grade Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rating\u003c\/td\u003e\n\u003ctd\u003eV6 \u0026amp; V8 Outboards up to 300 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572070750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194432831601,"sku":"THM-JPZ-8-DP","price":767.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-z-lock-8-setback-manual-jack-plate_0be3ae63-1ab1-4f32-b9bc-c1523efc55e1.jpg?v=1794789364"},{"product_id":"t-h-marine-z-lock-6-setback-manual-jack-plate","title":"T-H Marine Z-Lock 6\" Setback Manual Jack Plate, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock™ 6” Setback Manual Jack Plate gives your outboard a versatile 6\" setback and 5” of vertical adjustment in a rock-solid manual design. Built from full 1\/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Rating:\u003c\/strong\u003e Up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/2” Aircraft-Grade Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eZ-Lock Design Stops Side Slippage\u003c\/h3\u003e\n\u003cp\u003eMatching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.\u003c\/p\u003e\n\u003ch3\u003eWhy a 6” Setback\u003c\/h3\u003e\n\u003cp\u003eA 6\" setback is the all-round sweet spot for many bass, bay and multi-species boats. It moves the prop into cleaner water and gives noticeably better holeshot and lift without making the boat feel stern-heavy.\u003c\/p\u003e\n\u003ch3\u003eSingle-Bolt Adjustment From the Top\u003c\/h3\u003e\n\u003cp\u003eEngine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.\u003c\/p\u003e\n\u003ch3\u003e5” of Vertical Adjustment\u003c\/h3\u003e\n\u003cp\u003eRaise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Big Motors\u003c\/h3\u003e\n\u003cp\u003eFull 1\/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Setback\u003c\/h3\u003e\n\u003cp\u003eTalk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Z-Lock™ 6” Setback Manual Jack Plate (JPZ-6-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZ-Lock™ Manual Jack Plate - 6” Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJPZ-6-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eManual, Single Adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e6”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Adjustment\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSingle Bolt, From Top of Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/2” Aircraft-Grade Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rating\u003c\/td\u003e\n\u003ctd\u003eV6 \u0026amp; V8 Outboards up to 300 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194436632689,"sku":"THM-JPZ-6-DP","price":641.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-z-lock-6-setback-manual-jack-plate_0d6441f5-6b3e-4d5d-bad4-7a957ccbf4c0.jpg?v=1794789370"},{"product_id":"t-h-marine-z-lock-4-setback-manual-jack-plate","title":"T-H Marine Z-Lock 4\" Setback Manual Jack Plate, Up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock™ 4” Setback Manual Jack Plate gives your outboard the smallest setback in the Z-Lock line and 5” of vertical adjustment in a rock-solid manual design. Built from full 1\/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Rating:\u003c\/strong\u003e Up to 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/2” Aircraft-Grade Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eZ-Lock Design Stops Side Slippage\u003c\/h3\u003e\n\u003cp\u003eMatching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.\u003c\/p\u003e\n\u003ch3\u003eWhy a 4” Setback\u003c\/h3\u003e\n\u003cp\u003eA 4\" setback is the right choice when you want to raise the engine and add a touch of leverage without changing how your hull is balanced. It suits smaller bass boats, aluminum rigs and boats that already run well and just need height adjustment.\u003c\/p\u003e\n\u003ch3\u003eSingle-Bolt Adjustment From the Top\u003c\/h3\u003e\n\u003cp\u003eEngine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.\u003c\/p\u003e\n\u003ch3\u003e5” of Vertical Adjustment\u003c\/h3\u003e\n\u003cp\u003eRaise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Big Motors\u003c\/h3\u003e\n\u003cp\u003eFull 1\/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Setback\u003c\/h3\u003e\n\u003cp\u003eTalk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × T-H Marine Z-Lock™ 4” Setback Manual Jack Plate (JPZ-4-DP)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZ-Lock™ Manual Jack Plate - 4” Setback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJPZ-4-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eManual, Single Adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetback\u003c\/td\u003e\n\u003ctd\u003e4”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Adjustment\u003c\/td\u003e\n\u003ctd\u003e5”\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSingle Bolt, From Top of Jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/2” Aircraft-Grade Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rating\u003c\/td\u003e\n\u003ctd\u003eV6 \u0026amp; V8 Outboards up to 300 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572084252\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194436829297,"sku":"THM-JPZ-4-DP","price":544.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-z-lock-4-setback-manual-jack-plate_c4e9f3a6-bd8c-4c4b-af47-5e264b9ee1f0.jpg?v=1794789377"},{"product_id":"t-h-marine-atlas-hydraulic-gauge-kit-6-10-12-14-stainless-bezel","title":"T-H Marine ATLAS Digital Jack Plate Gauge Kit, 6\", 10\", 12\" \u0026 14\", Stainless Steel Bezel","description":"\u003cp\u003eThe T-H Marine ATLAS® Digital Position Gauge Kit shows exactly where your jack plate is, in real time, on a bright digital LED readout. This kit fits 6”, 10”, 12” \u0026amp; 14” ATLAS® hydraulic jack plates and has a stainless steel bezel. Every ATLAS plate is pre-drilled for the sensor, so installation is straightforward, and you can return to your fastest, shallowest or best-holeshot setting every time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ATLAS® 6”, 10”, 12” \u0026amp; 14” Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadout:\u003c\/strong\u003e Digital LED, 0 to 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 1\/4” per Number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Stainless Steel Bezel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnow Your Engine Height at a Glance\u003c\/h3\u003e\n\u003cp\u003eThe all-digital readout counts from 0 to 20, and each number equals 1\/4” of rise. Find your hull’s sweet spot once, then return to it every time instead of guessing by eye.\u003c\/p\u003e\n\u003ch3\u003eDial In Performance\u003c\/h3\u003e\n\u003cp\u003eRun higher for top-end speed and fuel efficiency, lower for a stronger holeshot, or all the way up for shallow water. The gauge turns your ATLAS jack plate into a precise tuning tool.\u003c\/p\u003e\n\u003ch3\u003ePre-Drilled ATLAS Fit\u003c\/h3\u003e\n\u003cp\u003eAll ATLAS jack plates are pre-drilled for the position sensor, so installation is simple. This kit is sized for 6”, 10”, 12” \u0026amp; 14” ATLAS models. A separate kit covers the other ATLAS sizes.\u003c\/p\u003e\n\u003ch3\u003eComplete Kit\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the flat sensor unit with 20’ of two-conductor cable, the magnet sensor bracket, the LED gauge and stainless steel mounting screws. It adds a height display to the standard rocker switch that comes with ATLAS jack plates.\u003c\/p\u003e\n\u003ch3\u003eNot for the Micro Jacker\u003c\/h3\u003e\n\u003cp\u003eThis gauge does not fit the ATLAS® Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ATLAS® digital LED position gauge with stainless steel bezel and 6” leads\u003c\/li\u003e\n\u003cli\u003e1 × flat sensor unit with 20’ two-conductor cable\u003c\/li\u003e\n\u003cli\u003e1 × 90° magnet sensor bracket\u003c\/li\u003e\n\u003cli\u003eStainless steel #10-32 mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATLAS® Digital Position Gauge Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFAGK-2SS-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® 6”, 10”, 12” \u0026amp; 14” Hydraulic Jack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® Micro Jacker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDigital LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003e0 to 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e1\/4” Rise per Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Cable\u003c\/td\u003e\n\u003ctd\u003e20’ Two-Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572074352\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194439254129,"sku":"THM-FAGK-2SS-DP","price":447.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-hydraulic-gauge-kit-6-10-12-14-stainless-bezel_e9c0380b-f6ed-40cc-bcbb-1a7fa26131f5.jpg?v=1794789700"},{"product_id":"t-h-marine-atlas-hydraulic-gauge-kit-6-10-12-14-black-bezel","title":"T-H Marine ATLAS Digital Jack Plate Gauge Kit, 6\", 10\", 12\" \u0026 14\", Black Bezel","description":"\u003cp\u003eThe T-H Marine ATLAS® Digital Position Gauge Kit shows exactly where your jack plate is, in real time, on a bright digital LED readout. This kit fits 6”, 10”, 12” \u0026amp; 14” ATLAS® hydraulic jack plates and has a black polymer bezel. Every ATLAS plate is pre-drilled for the sensor, so installation is straightforward, and you can return to your fastest, shallowest or best-holeshot setting every time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ATLAS® 6”, 10”, 12” \u0026amp; 14” Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadout:\u003c\/strong\u003e Digital LED, 0 to 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 1\/4” per Number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Black Polymer Bezel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnow Your Engine Height at a Glance\u003c\/h3\u003e\n\u003cp\u003eThe all-digital readout counts from 0 to 20, and each number equals 1\/4” of rise. Find your hull’s sweet spot once, then return to it every time instead of guessing by eye.\u003c\/p\u003e\n\u003ch3\u003eDial In Performance\u003c\/h3\u003e\n\u003cp\u003eRun higher for top-end speed and fuel efficiency, lower for a stronger holeshot, or all the way up for shallow water. The gauge turns your ATLAS jack plate into a precise tuning tool.\u003c\/p\u003e\n\u003ch3\u003ePre-Drilled ATLAS Fit\u003c\/h3\u003e\n\u003cp\u003eAll ATLAS jack plates are pre-drilled for the position sensor, so installation is simple. This kit is sized for 6”, 10”, 12” \u0026amp; 14” ATLAS models. A separate kit covers the other ATLAS sizes.\u003c\/p\u003e\n\u003ch3\u003eComplete Kit\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the flat sensor unit with 20’ of two-conductor cable, the magnet sensor bracket, the LED gauge and stainless steel mounting screws. It adds a height display to the standard rocker switch that comes with ATLAS jack plates.\u003c\/p\u003e\n\u003ch3\u003eNot for the Micro Jacker\u003c\/h3\u003e\n\u003cp\u003eThis gauge does not fit the ATLAS® Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ATLAS® digital LED position gauge with black polymer bezel and 6” leads\u003c\/li\u003e\n\u003cli\u003e1 × flat sensor unit with 20’ two-conductor cable\u003c\/li\u003e\n\u003cli\u003e1 × 90° magnet sensor bracket\u003c\/li\u003e\n\u003cli\u003eStainless steel #10-32 mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATLAS® Digital Position Gauge Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFAGK-2-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® 6”, 10”, 12” \u0026amp; 14” Hydraulic Jack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® Micro Jacker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDigital LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003e0 to 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e1\/4” Rise per Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel\u003c\/td\u003e\n\u003ctd\u003eBlack Polymer Bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Cable\u003c\/td\u003e\n\u003ctd\u003e20’ Two-Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572074307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194439286897,"sku":"THM-FAGK-2-DP","price":447.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-hydraulic-gauge-kit-6-10-12-14-black-bezel_c5d77ebf-9f1b-4f50-a455-14d7d908135f.jpg?v=1794789705"},{"product_id":"t-h-marine-atlas-hydraulic-gauge-kit-4-8-stainless-bezel","title":"T-H Marine ATLAS Digital Jack Plate Gauge Kit, 4\" \u0026 8\", Stainless Steel Bezel","description":"\u003cp\u003eThe T-H Marine ATLAS® Digital Position Gauge Kit shows exactly where your jack plate is, in real time, on a bright digital LED readout. This kit fits 4” \u0026amp; 8” ATLAS® hydraulic jack plates and has a stainless steel bezel. Every ATLAS plate is pre-drilled for the sensor, so installation is straightforward, and you can return to your fastest, shallowest or best-holeshot setting every time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ATLAS® 4” \u0026amp; 8” Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadout:\u003c\/strong\u003e Digital LED, 0 to 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 1\/4” per Number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Stainless Steel Bezel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnow Your Engine Height at a Glance\u003c\/h3\u003e\n\u003cp\u003eThe all-digital readout counts from 0 to 20, and each number equals 1\/4” of rise. Find your hull’s sweet spot once, then return to it every time instead of guessing by eye.\u003c\/p\u003e\n\u003ch3\u003eDial In Performance\u003c\/h3\u003e\n\u003cp\u003eRun higher for top-end speed and fuel efficiency, lower for a stronger holeshot, or all the way up for shallow water. The gauge turns your ATLAS jack plate into a precise tuning tool.\u003c\/p\u003e\n\u003ch3\u003ePre-Drilled ATLAS Fit\u003c\/h3\u003e\n\u003cp\u003eAll ATLAS jack plates are pre-drilled for the position sensor, so installation is simple. This kit is sized for 4” \u0026amp; 8” ATLAS models. A separate kit covers the other ATLAS sizes.\u003c\/p\u003e\n\u003ch3\u003eComplete Kit\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the flat sensor unit with 20’ of two-conductor cable, the magnet sensor bracket, the LED gauge and stainless steel mounting screws. It adds a height display to the standard rocker switch that comes with ATLAS jack plates.\u003c\/p\u003e\n\u003ch3\u003eNot for the Micro Jacker\u003c\/h3\u003e\n\u003cp\u003eThis gauge does not fit the ATLAS® Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ATLAS® digital LED position gauge with stainless steel bezel and 6” leads\u003c\/li\u003e\n\u003cli\u003e1 × flat sensor unit with 20’ two-conductor cable\u003c\/li\u003e\n\u003cli\u003e1 × 90° magnet sensor bracket\u003c\/li\u003e\n\u003cli\u003eStainless steel #10-32 mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATLAS® Digital Position Gauge Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFAGK-1SS-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® 4” \u0026amp; 8” Hydraulic Jack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® Micro Jacker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDigital LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003e0 to 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e1\/4” Rise per Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Cable\u003c\/td\u003e\n\u003ctd\u003e20’ Two-Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572074253\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194439319665,"sku":"THM-FAGK-1SS-DP","price":447.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-hydraulic-gauge-kit-4-8-stainless-bezel_1c09b798-7000-45f1-b647-a7bb29b505f4.jpg?v=1794789711"},{"product_id":"t-h-marine-atlas-hydraulic-gauge-kit-4-8-black-bezel","title":"T-H Marine ATLAS Digital Jack Plate Gauge Kit, 4\" \u0026 8\", Black Bezel","description":"\u003cp\u003eThe T-H Marine ATLAS® Digital Position Gauge Kit shows exactly where your jack plate is, in real time, on a bright digital LED readout. This kit fits 4” \u0026amp; 8” ATLAS® hydraulic jack plates and has a black polymer bezel. Every ATLAS plate is pre-drilled for the sensor, so installation is straightforward, and you can return to your fastest, shallowest or best-holeshot setting every time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ATLAS® 4” \u0026amp; 8” Jack Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadout:\u003c\/strong\u003e Digital LED, 0 to 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 1\/4” per Number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel:\u003c\/strong\u003e Black Polymer Bezel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnow Your Engine Height at a Glance\u003c\/h3\u003e\n\u003cp\u003eThe all-digital readout counts from 0 to 20, and each number equals 1\/4” of rise. Find your hull’s sweet spot once, then return to it every time instead of guessing by eye.\u003c\/p\u003e\n\u003ch3\u003eDial In Performance\u003c\/h3\u003e\n\u003cp\u003eRun higher for top-end speed and fuel efficiency, lower for a stronger holeshot, or all the way up for shallow water. The gauge turns your ATLAS jack plate into a precise tuning tool.\u003c\/p\u003e\n\u003ch3\u003ePre-Drilled ATLAS Fit\u003c\/h3\u003e\n\u003cp\u003eAll ATLAS jack plates are pre-drilled for the position sensor, so installation is simple. This kit is sized for 4” \u0026amp; 8” ATLAS models. A separate kit covers the other ATLAS sizes.\u003c\/p\u003e\n\u003ch3\u003eComplete Kit\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the flat sensor unit with 20’ of two-conductor cable, the magnet sensor bracket, the LED gauge and stainless steel mounting screws. It adds a height display to the standard rocker switch that comes with ATLAS jack plates.\u003c\/p\u003e\n\u003ch3\u003eNot for the Micro Jacker\u003c\/h3\u003e\n\u003cp\u003eThis gauge does not fit the ATLAS® Micro Jacker.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × ATLAS® digital LED position gauge with black polymer bezel and 6” leads\u003c\/li\u003e\n\u003cli\u003e1 × flat sensor unit with 20’ two-conductor cable\u003c\/li\u003e\n\u003cli\u003e1 × 90° magnet sensor bracket\u003c\/li\u003e\n\u003cli\u003eStainless steel #10-32 mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATLAS® Digital Position Gauge Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFAGK-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® 4” \u0026amp; 8” Hydraulic Jack Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003eATLAS® Micro Jacker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDigital LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003e0 to 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e1\/4” Rise per Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel\u003c\/td\u003e\n\u003ctd\u003eBlack Polymer Bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Cable\u003c\/td\u003e\n\u003ctd\u003e20’ Two-Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572074208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194439352433,"sku":"THM-FAGK-1-DP","price":447.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-atlas-hydraulic-gauge-kit-4-8-black-bezel_cd202a91-a5e0-4ec2-a224-8b43c278d8be.jpg?v=1794789717"},{"product_id":"t-h-marine-twist-step-emergency-jack-plate-ladder","title":"T-H Marine TWIST STEP Emergency Jack Plate Ladder, Universal Fit, ABYC-Compliant","description":"\u003cp\u003eThe T-H Marine TWIST STEP™ Emergency Jack Plate Ladder gives you a safe way back into the boat from the water. It mounts permanently to your engine or jack plate, stays tucked out of the way while you run, and twists down into position the moment you need it. Every boat that runs a jack plate should have one.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Universal, Any Outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Port Side, Engine or Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Non-Corrosive Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Meets ABYC Reboarding Rules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGet Back Aboard Safely\u003c\/h3\u003e\n\u003cp\u003eIf someone goes overboard, or you are swimming, skiing or recovering gear, TWIST STEP gives you a solid step to climb back in. You can deploy it from the water.\u003c\/p\u003e\n\u003ch3\u003eTwists Down, Snaps Away\u003c\/h3\u003e\n\u003cp\u003eThe ladder rotates and drops into position when needed, then snaps securely back into its slot when stowed, keeping it clear of the motor and out of your way.\u003c\/p\u003e\n\u003ch3\u003eUniversal Mounting\u003c\/h3\u003e\n\u003cp\u003eIt mounts to any outboard engine with a bracket (not included), or bolts directly to the pre-drilled port side of an ATLAS® jack plate. Once installed it stays put.\u003c\/p\u003e\n\u003ch3\u003eAll-Aluminum, Non-Slip Steps\u003c\/h3\u003e\n\u003cp\u003eThe all-aluminum build won’t corrode in fresh or salt water, and both steps have non-slip material for secure footing.\u003c\/p\u003e\n\u003ch3\u003eMeets ABYC Regulations\u003c\/h3\u003e\n\u003cp\u003eTWIST STEP meets ABYC requirements for reboarding devices.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × T-H Marine TWIST STEP™ Emergency Jack Plate Ladder, Port Side (EBL-1-DP)\u003c\/li\u003e\n\u003cli\u003eEngine mounting bracket sold separately where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eTWIST STEP™ Emergency Jack Plate Ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eEBL-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eUniversal, All Outboards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Side\u003c\/td\u003e\n\u003ctd\u003ePort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eEngine with Bracket or Direct to Pre-Drilled ATLAS® Jack Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteps\u003c\/td\u003e\n\u003ctd\u003e2, Non-Slip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eABYC Reboarding Device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572070859\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194441810033,"sku":"THM-EBL-1-DP","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-twist-step-emergency-jack-plate-ladder_d04d2bf5-10ce-455c-abd2-ebc4452a2766.jpg?v=1794789831"},{"product_id":"t-h-marine-hot-foot-pro-top-load-foot-throttle-yamaha-chrysler","title":"T-H Marine HOT FOOT Pro Marine Foot Throttle, Yamaha, Honda, Suzuki \u0026 Chrysler","description":"\u003cp\u003eThe T-H Marine HOT FOOT™ Pro Top Load Foot Throttle is the premium version of the original boat foot throttle, set up for Yamaha, Honda, Suzuki and Chrysler outboards. It has a rugged aluminum finish, full-color pedal graphics and top-side cable connections, so you can drive your boat like your car with both hands on the wheel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Yamaha, Honda, Suzuki, Chrysler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Connection:\u003c\/strong\u003e Top Load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless Steel, Teflon Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdle Stop:\u003c\/strong\u003e FICHT \u0026amp; Optimax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrive Your Boat Like Your Car\u003c\/h3\u003e\n\u003cp\u003eKeep both hands on the wheel and control speed with your foot. Take your foot off and the stainless steel return spring brings the engine straight back to idle. That is a real safety upgrade on any high-performance boat.\u003c\/p\u003e\n\u003ch3\u003eTop-Load Cable Connections\u003c\/h3\u003e\n\u003cp\u003eThe throttle cable connects from the top side. That makes HOT FOOT™ Pro easier to install and frees up more foot and leg room at the helm.\u003c\/p\u003e\n\u003ch3\u003eBuilt to Last\u003c\/h3\u003e\n\u003cp\u003eA rugged aluminum finish, stainless steel hardware and Teflon bushings at the pivot points give it smooth, consistent throttle feel season after season. A toe clip adds security in rough water.\u003c\/p\u003e\n\u003ch3\u003ePatented Idle Stop\u003c\/h3\u003e\n\u003cp\u003eA patented idle stop is built in for FICHT and Optimax engines.\u003c\/p\u003e\n\u003ch3\u003eFits Yamaha, Honda, Suzuki and Chrysler\u003c\/h3\u003e\n\u003cp\u003eThis model (HF-1CT-DP) fits Yamaha, Honda, Suzuki and Chrysler outboards, including Mercury Gen 2 controls, but not Mercury Pro XS. For Johnson, Evinrude, Mercury and Mariner, choose the HF-1T-DP.\u003c\/p\u003e\n\u003ch3\u003eRequires a Longer Throttle Cable\u003c\/h3\u003e\n\u003cp\u003eHOT FOOT™ Pro needs a throttle cable longer than your existing one, not included. T-H Marine recommends a throttle cable about 2 feet longer than the shift cable. The optional Slide Mount (HFM-1-DP) adds fore-and-aft adjustment for comfort and multiple drivers.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × T-H Marine HOT FOOT™ Pro Top Load Foot Throttle (HF-1CT-DP)\u003c\/li\u003e\n\u003cli\u003eThrottle cable and floor screws not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Match throttle linkage and cable travel to the engine controls, and confirm unrestricted operation and return action after installation. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHOT FOOT™ Pro Top Load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHF-1CT-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Compatibility\u003c\/td\u003e\n\u003ctd\u003eYamaha, Honda, Suzuki, Chrysler (Incl. Mercury Gen 2, Not Pro XS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Connection\u003c\/td\u003e\n\u003ctd\u003eTop Load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminum, Stainless Steel Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eTeflon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn Spring\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Stop\u003c\/td\u003e\n\u003ctd\u003ePatented, FICHT \u0026amp; Optimax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrottle Cable\u003c\/td\u003e\n\u003ctd\u003eLonger Cable Required (Not Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Accessory\u003c\/td\u003e\n\u003ctd\u003eSlide Mount HFM-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572001952\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194441842801,"sku":"THM-HF-1CT-DP","price":278.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-hot-foot-pro-top-load-foot-throttle-yamaha-chrysler_d83e21fb-c262-4a37-8bce-cc854fdf4486.jpg?v=1794789834"},{"product_id":"t-h-marine-hot-foot-pro-top-load-foot-throttle-omc-mercury","title":"T-H Marine HOT FOOT Pro Marine Foot Throttle, Mercury, Mariner, Johnson \u0026 Evinrude","description":"\u003cp\u003eThe T-H Marine HOT FOOT™ Pro Top Load Foot Throttle is the premium version of the original boat foot throttle, set up for Mercury, Mariner, Johnson and Evinrude outboards. It has a rugged aluminum finish, full-color pedal graphics and top-side cable connections, so you can drive your boat like your car with both hands on the wheel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Mercury, Mariner, Johnson, Evinrude\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Connection:\u003c\/strong\u003e Top Load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless Steel, Teflon Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdle Stop:\u003c\/strong\u003e FICHT \u0026amp; Optimax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrive Your Boat Like Your Car\u003c\/h3\u003e\n\u003cp\u003eKeep both hands on the wheel and control speed with your foot. Take your foot off and the stainless steel return spring brings the engine straight back to idle. That is a real safety upgrade on any high-performance boat.\u003c\/p\u003e\n\u003ch3\u003eTop-Load Cable Connections\u003c\/h3\u003e\n\u003cp\u003eThe throttle cable connects from the top side. That makes HOT FOOT™ Pro easier to install and frees up more foot and leg room at the helm.\u003c\/p\u003e\n\u003ch3\u003eBuilt to Last\u003c\/h3\u003e\n\u003cp\u003eA rugged aluminum finish, stainless steel hardware and Teflon bushings at the pivot points give it smooth, consistent throttle feel season after season. A toe clip adds security in rough water.\u003c\/p\u003e\n\u003ch3\u003ePatented Idle Stop\u003c\/h3\u003e\n\u003cp\u003eA patented idle stop is built in for FICHT and Optimax engines.\u003c\/p\u003e\n\u003ch3\u003eFits Mercury, Mariner, Johnson and Evinrude\u003c\/h3\u003e\n\u003cp\u003eThis model (HF-1T-DP) fits Johnson, Evinrude, Mercury and Mariner outboards, including the Mercury Pro XS 3.8L V6 and 4.6L V8. It does not fit Mercury Gen 2 controls. For Yamaha, Honda, Suzuki and Chrysler, choose the HF-1CT-DP.\u003c\/p\u003e\n\u003ch3\u003eRequires a Longer Throttle Cable\u003c\/h3\u003e\n\u003cp\u003eHOT FOOT™ Pro needs a throttle cable longer than your existing one, not included. T-H Marine recommends a throttle cable about 2 feet longer than the shift cable. The optional Slide Mount (HFM-1-DP) adds fore-and-aft adjustment for comfort and multiple drivers.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × T-H Marine HOT FOOT™ Pro Top Load Foot Throttle (HF-1T-DP)\u003c\/li\u003e\n\u003cli\u003eThrottle cable and floor screws not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Match throttle linkage and cable travel to the engine controls, and confirm unrestricted operation and return action after installation. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHOT FOOT™ Pro Top Load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHF-1T-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Compatibility\u003c\/td\u003e\n\u003ctd\u003eMercury, Mariner, Johnson, Evinrude (Incl. Pro XS 3.8L V6 \u0026amp; 4.6L V8, Not Gen 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Connection\u003c\/td\u003e\n\u003ctd\u003eTop Load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminum, Stainless Steel Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eTeflon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn Spring\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Stop\u003c\/td\u003e\n\u003ctd\u003ePatented, FICHT \u0026amp; Optimax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrottle Cable\u003c\/td\u003e\n\u003ctd\u003eLonger Cable Required (Not Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Accessory\u003c\/td\u003e\n\u003ctd\u003eSlide Mount HFM-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572001907\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194442006641,"sku":"THM-HF-1T-DP","price":291.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-hot-foot-pro-top-load-foot-throttle-omc-mercury_4b1d10bd-d681-462e-bde2-6525a762bb08.jpg?v=1794789840"},{"product_id":"t-h-marine-hot-foot-universal-foot-throttle","title":"T-H Marine HOT FOOT Universal Marine Foot Throttle","description":"\u003cp\u003eThe T-H Marine HOT FOOT™ is the original and only real HOT FOOT™ throttle, the boat foot throttle that has led the market for more than 30 years. This universal model fits virtually all marine engines and is now compatible with Mercury 175 to 300 Pro XS outboards. Keep both hands on the wheel, control speed with your foot, and the engine returns to idle the moment you lift off.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e All Marine Engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Cast Aluminum, Stainless Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn to Idle:\u003c\/strong\u003e Stainless Steel Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdle Stop:\u003c\/strong\u003e FICHT \u0026amp; Optimax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrive Your Boat Like Your Car\u003c\/h3\u003e\n\u003cp\u003eBoth hands stay on the wheel while your foot controls speed. That means better control in rough water, around other boats and at the dock. Lift your foot and the throttle springs back to idle.\u003c\/p\u003e\n\u003ch3\u003eUniversal Fit\u003c\/h3\u003e\n\u003cp\u003eThis universal model works with outboard and inboard engines from virtually every manufacturer, and it is now compatible with all Mercury 175–300 Pro XS outboards.\u003c\/p\u003e\n\u003ch3\u003eBuilt to Last\u003c\/h3\u003e\n\u003cp\u003eAll-cast-aluminum construction with stainless steel hardware is lightweight and corrosion resistant. Nylon and Teflon bushings at every critical pivot point give smooth, consistent throttle feel.\u003c\/p\u003e\n\u003ch3\u003eSafety Built In\u003c\/h3\u003e\n\u003cp\u003eA stainless steel return spring brings the engine back to idle when released. A toe clip adds security in rough conditions, and a patented idle stop is built in for FICHT and Optimax engines.\u003c\/p\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eHOT FOOT™ mounts to the boat floor with four screws (not included) and uses standard control cables. It needs a throttle cable about 2 feet longer than the shift cable, not included. The optional Slide Mount (HFM-1-DP) gives 5” of slide adjustment for comfort and multiple drivers.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × T-H Marine HOT FOOT™ Universal Original Foot Throttle (HF-1-DP)\u003c\/li\u003e\n\u003cli\u003eThrottle cable and floor screws not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuying and Setup Notes\u003c\/h2\u003e\u003cp\u003eVerify the exact engine, transom and hardware fitment before purchasing. Match throttle linkage and cable travel to the engine controls, and confirm unrestricted operation and return action after installation. Have critical steering or throttle installations checked for safe operation.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eT-H Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHOT FOOT™ Original Foot Throttle, Universal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHF-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Compatibility\u003c\/td\u003e\n\u003ctd\u003eAll Marine Engines, Incl. Mercury 175–300 Pro XS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCast Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eNylon \u0026amp; Teflon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn Spring\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Stop\u003c\/td\u003e\n\u003ctd\u003ePatented, FICHT \u0026amp; Optimax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Cables\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrottle Cable\u003c\/td\u003e\n\u003ctd\u003eAbout 2’ Longer Than Shift Cable (Not Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 Floor Screws (Not Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Accessory\u003c\/td\u003e\n\u003ctd\u003eSlide Mount HFM-1-DP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e733572001600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":71194442137713,"sku":"THM-HF-1-DP","price":276.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/t-h-marine-hot-foot-universal-foot-throttle_9116c3d4-7dd4-4e2d-b226-072b53f2d34e.jpg?v=1794789843"},{"product_id":"fortress-fx-anchor","title":"Fortress FX Series Aluminum Boat Anchor, 10 to 47 lb, Adjustable Flukes","description":"\u003cp\u003eThe Fortress FX is the lightweight aluminum anchor that has out-held far heavier steel anchors in independent tests for more than three decades, including US Navy trials where it withstood pull loads averaging over 200 times its own weight. Precision-machined, razor-sharp flukes set fast and dig deep, an adjustable fluke angle handles both sand and soft mud, and the whole anchor breaks down flat for stowing as a primary, spare or storm anchor. Made in the USA and backed by Fortress's Lifetime Parts Replacement Warranty.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodized Aluminum Magnesium Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluke Angle:\u003c\/strong\u003e Adjustable 32° or 45°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e FX-16 to FX-85, Boats 33-68 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Disassembles Flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHolding Power Without the Weight\u003c\/h3\u003e\n\u003cp\u003eFortress anchors are made from a high-tensile, corrosion-resistant aluminum magnesium alloy that is as strong as steel at roughly half the weight. You get more holding power from an anchor that is easier to lift, launch and stow.\u003c\/p\u003e\n\u003ch3\u003eSharp Flukes That Set Fast\u003c\/h3\u003e\n\u003cp\u003eEvery FX is precision-machined for sharpness, so the flukes penetrate common sea bottoms quickly instead of skating across them like dull-edged steel anchors.\u003c\/p\u003e\n\u003ch3\u003eAdjustable for Sand or Mud\u003c\/h3\u003e\n\u003cp\u003eSet the flukes at 32° for sand, clay and common bottoms, or switch to 45° for soft mud, where the extra angle dramatically increases holding power.\u003c\/p\u003e\n\u003ch3\u003eStows Anywhere\u003c\/h3\u003e\n\u003cp\u003eThe FX disassembles in minutes into a flat package, making it easy to keep a full-size storm anchor aboard in a locker or under a berth. The tough anodized finish keeps it looking sharp.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-16:\u003c\/strong\u003e 10 lb, boats 33-38 ft, 1,250 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-23:\u003c\/strong\u003e 15 lb, boats 39-45 ft, 2,000 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-37:\u003c\/strong\u003e 21 lb, boats 46-51 ft, 3,000 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-55:\u003c\/strong\u003e 32 lb, boats 52-58 ft, 4,000 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-85:\u003c\/strong\u003e 47 lb, boats 59-68 ft, 5,250 lb working load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Fortress FX anchor (model per selection)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eSelecting the Right Anchor Setup\u003c\/h2\u003e\u003cp\u003eAnchor selection depends on more than weight alone: consider your boat's length and displacement, windage, prevailing conditions, seabed type and available chain and rode. Use the manufacturer's sizing guidance for the particular model and allow suitable scope for the conditions. If choosing between listed sizes, confirm the exact model and boat-length recommendation before ordering. Inspect the rode, shackles and attachment points regularly.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFortress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModels\u003c\/td\u003e\n\u003ctd\u003eFX-16, FX-23, FX-37, FX-55, FX-85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchor Weight\u003c\/td\u003e\n\u003ctd\u003eFX-16: 10 lb \/ FX-23: 15 lb \/ FX-37: 21 lb \/ FX-55: 32 lb \/ FX-85: 47 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoat Length\u003c\/td\u003e\n\u003ctd\u003eFX-16: 33-38 ft \/ FX-23: 39-45 ft \/ FX-37: 46-51 ft \/ FX-55: 52-58 ft \/ FX-85: 59-68 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Load\u003c\/td\u003e\n\u003ctd\u003eFX-16: 1,250 lb \/ FX-23: 2,000 lb \/ FX-37: 3,000 lb \/ FX-55: 4,000 lb \/ FX-85: 5,250 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShank Length\u003c\/td\u003e\n\u003ctd\u003eFX-16: 31\" \/ FX-23: 36\" \/ FX-37: 40\" \/ FX-55: 46\" \/ FX-85: 51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluke Length\u003c\/td\u003e\n\u003ctd\u003eFX-16: 18\" \/ FX-23: 21\" \/ FX-37: 24\" \/ FX-55: 27\" \/ FX-85: 30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock Length\u003c\/td\u003e\n\u003ctd\u003eFX-16: 25\" \/ FX-23: 29\" \/ FX-37: 32\" \/ FX-55: 37\" \/ FX-85: 41\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eFluke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum Magnesium Alloy, Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluke Angle\u003c\/td\u003e\n\u003ctd\u003eAdjustable 32° \/ 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMade In\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eFX-16: 647124120162 \/ FX-23: 647124120230 \/ FX-37: 647124120377 \/ FX-55: 647124120551 \/ FX-85: 647124120858\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime Parts Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fortress","offers":[{"title":"FX-16 - 10 lb (33-38 ft Boats)","offer_id":71198967562353,"sku":"FOR-FX-16","price":369.99,"currency_code":"USD","in_stock":true},{"title":"FX-23 - 15 lb (39-45 ft Boats)","offer_id":71198967595121,"sku":"FOR-FX-23","price":569.99,"currency_code":"USD","in_stock":true},{"title":"FX-37 - 21 lb (46-51 ft Boats)","offer_id":71198967627889,"sku":"FOR-FX-37","price":949.99,"currency_code":"USD","in_stock":true},{"title":"FX-55 - 32 lb (52-58 ft Boats)","offer_id":71198967660657,"sku":"FOR-FX-55","price":1549.99,"currency_code":"USD","in_stock":true},{"title":"FX-85 - 47 lb (59-68 ft Boats)","offer_id":71198967693425,"sku":"FOR-FX-85","price":1918.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/fortress-fx-16-aluminum-boat-anchor-10-lb_4ca493f5-cb14-4ef1-8947-4379f65600b2.jpg?v=1794838675"},{"product_id":"fortress-guardian-anchor","title":"Fortress Guardian Aluminum Boat Anchor, G-23 to G-85, 13 to 42 lb","description":"\u003cp\u003eThe Fortress Guardian brings Fortress engineering to a more affordable anchor. It is made from the same high-tensile, corrosion-resistant aluminum magnesium alloy as the Fortress FX, so it is as strong as steel at half the weight and will never rust. Guardian skips the FX's anodizing and adjustable fluke angle in favor of a fixed 32° angle that works in most common sea bottoms, and it is second only to the FX in holding power tests. An excellent primary, spare or storm anchor. Made in the USA.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum Magnesium Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluke Angle:\u003c\/strong\u003e Fixed 32°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e G-23 to G-85, Boats 34-62 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Disassembles Flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFortress Performance for Less\u003c\/h3\u003e\n\u003cp\u003eGuardian benefits from years of Fortress research and development. Fortress removed several machining steps and the FX's extra features to deliver fast setting and strong holding at a lower price.\u003c\/p\u003e\n\u003ch3\u003eRustproof and Non-Magnetic\u003c\/h3\u003e\n\u003cp\u003eThe aluminum alloy construction will not rust and will not interfere with your compass, and there are no welds that can fail.\u003c\/p\u003e\n\u003ch3\u003eFixed 32° Fluke Angle\u003c\/h3\u003e\n\u003cp\u003eThe single 32° angle is designed for sand, clay and most common sea bottoms. If you regularly anchor in soft mud, the adjustable Fortress FX is the better choice.\u003c\/p\u003e\n\u003ch3\u003eEasy to Stow, Easy to Repair\u003c\/h3\u003e\n\u003cp\u003eThe Guardian assembles and disassembles for compact storage, and every component is replaceable.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eG-23:\u003c\/strong\u003e 13 lb, boats 34-41 ft, 1,625 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG-37:\u003c\/strong\u003e 18 lb, boats 42-47 ft, 2,500 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG-55:\u003c\/strong\u003e 29 lb, boats 48-53 ft, 3,500 lb working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG-85:\u003c\/strong\u003e 42 lb, boats 54-62 ft, 4,625 lb working load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Fortress Guardian anchor (model per selection)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eSelecting the Right Anchor Setup\u003c\/h2\u003e\u003cp\u003eAnchor selection depends on more than weight alone: consider your boat's length and displacement, windage, prevailing conditions, seabed type and available chain and rode. Use the manufacturer's sizing guidance for the particular model and allow suitable scope for the conditions. If choosing between listed sizes, confirm the exact model and boat-length recommendation before ordering. Inspect the rode, shackles and attachment points regularly.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFortress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModels\u003c\/td\u003e\n\u003ctd\u003eG-23, G-37, G-55, G-85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchor Weight\u003c\/td\u003e\n\u003ctd\u003eG-23: 13 lb \/ G-37: 18 lb \/ G-55: 29 lb \/ G-85: 42 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoat Length\u003c\/td\u003e\n\u003ctd\u003eG-23: 34-41 ft \/ G-37: 42-47 ft \/ G-55: 48-53 ft \/ G-85: 54-62 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Load\u003c\/td\u003e\n\u003ctd\u003eG-23: 1,625 lb \/ G-37: 2,500 lb \/ G-55: 3,500 lb \/ G-85: 4,625 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShank Length\u003c\/td\u003e\n\u003ctd\u003eG-23: 33\" \/ G-37: 38\" \/ G-55: 43\" \/ G-85: 48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluke Length\u003c\/td\u003e\n\u003ctd\u003eG-23: 19\" \/ G-37: 22\" \/ G-55: 25\" \/ G-85: 28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock Length\u003c\/td\u003e\n\u003ctd\u003eG-23: 27\" \/ G-37: 31\" \/ G-55: 35\" \/ G-85: 39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eFluke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum Magnesium Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluke Angle\u003c\/td\u003e\n\u003ctd\u003eFixed 32°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMade In\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eG-23: 647124340232 \/ G-37: 647124340379 \/ G-55: 647124340553 \/ G-85: 647124340850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Parts Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fortress","offers":[{"title":"G-23 - 13 lb (34-41 ft Boats)","offer_id":71198969069681,"sku":"FOR-G-23","price":304.99,"currency_code":"USD","in_stock":true},{"title":"G-37 - 18 lb (42-47 ft Boats)","offer_id":71198969102449,"sku":"FOR-G-37","price":479.99,"currency_code":"USD","in_stock":true},{"title":"G-55 - 29 lb (48-53 ft Boats)","offer_id":71198969135217,"sku":"FOR-G-55","price":709.99,"currency_code":"USD","in_stock":true},{"title":"G-85 - 42 lb (54-62 ft Boats)","offer_id":71198969167985,"sku":"FOR-G-85","price":1084.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/fortress-guardian-g-23-aluminum-boat-anchor-13-lb_e120786b-c5aa-4277-8f65-53c58d12a565.jpg?v=1794838683"},{"product_id":"fortress-fx-complete-anchoring-system","title":"Fortress FX Complete Anchoring System, FX-7 to FX-16, 15 ft Chain \u0026 250 ft Rode","description":"\u003cp\u003eThe Fortress FX Complete Anchoring System puts everything you need to anchor in one box: a Fortress FX aluminum anchor, 15' of 1\/4\" G-30 chain spliced to 250' of shock-absorbing 3\/8\" three-strand nylon rope, a shackle and a safe anchoring guide. The FX's precision-machined, sharpened flukes set fast and dig deep, adjust from 32° for sand and clay to 45° for soft mud, and come with Mud Palms for problem soft bottoms. Made in the USA.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor:\u003c\/strong\u003e Fortress FX-7, FX-11 or FX-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e 15' of 1\/4\" G-30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRode:\u003c\/strong\u003e 250' of 3\/8\" Three-Strand Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoats:\u003c\/strong\u003e 16 to 38 ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReady to Anchor Out of the Box\u003c\/h3\u003e\n\u003cp\u003eThe chain comes spliced to the rope, so there is no splicing or rigging to do. Shackle the chain to the anchor, tie off the bitter end and you are ready to go.\u003c\/p\u003e\n\u003ch3\u003eFortress FX Holding Power\u003c\/h3\u003e\n\u003cp\u003eThe included FX anchor is machined from a high-tensile aluminum magnesium alloy that is as strong as steel at half the weight, with sharpened flukes that set quickly and hold hard.\u003c\/p\u003e\n\u003ch3\u003eAdjustable for Sand or Mud\u003c\/h3\u003e\n\u003cp\u003eSet the flukes at 32° for sand and clay or 45° for soft mud. The included Mud Palms further improve setting performance in soft bottoms.\u003c\/p\u003e\n\u003ch3\u003eShock-Absorbing Rode\u003c\/h3\u003e\n\u003cp\u003e250' of three-strand nylon stretches under load to soften wave and wind surges, while the 15' chain lead protects the rope from chafe on the bottom and helps the anchor set at a low angle.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-7-AS:\u003c\/strong\u003e FX-7 anchor (4 lb), boats 16-27 ft, 700 lb anchor working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-11-AS:\u003c\/strong\u003e FX-11 anchor (7 lb), boats 28-32 ft, 900 lb anchor working load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX-16-AS:\u003c\/strong\u003e FX-16 anchor (10 lb), boats 33-38 ft, 1,250 lb anchor working load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fortress FX anchor (FX-7, FX-11 or FX-16 per selection) with Mud Palms\u003c\/li\u003e\n\u003cli\u003e15' of 1\/4\" G-30 chain, spliced to the rope\u003c\/li\u003e\n\u003cli\u003e250' of 3\/8\" three-strand nylon rope\u003c\/li\u003e\n\u003cli\u003e1 x shackle\u003c\/li\u003e\n\u003cli\u003eSafe anchoring guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSelecting the Right Anchor Setup\u003c\/h2\u003e\u003cp\u003eAnchor selection depends on more than weight alone: consider your boat's length and displacement, windage, prevailing conditions, seabed type and available chain and rode. Use the manufacturer's sizing guidance for the particular model and allow suitable scope for the conditions. Review the included chain and rope lengths before departure so the packaged system suits the depth where you expect to anchor. Inspect the rode, shackles and attachment points regularly.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFortress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModels\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS, FX-11-AS, FX-16-AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchor\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS: FX-7 (4 lb) \/ FX-11-AS: FX-11 (7 lb) \/ FX-16-AS: FX-16 (10 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoat Length\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS: 16-27 ft \/ FX-11-AS: 28-32 ft \/ FX-16-AS: 33-38 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchor Working Load\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS: 700 lb \/ FX-11-AS: 900 lb \/ FX-16-AS: 1,250 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain\u003c\/td\u003e\n\u003ctd\u003e15' of 1\/4\" G-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRope\u003c\/td\u003e\n\u003ctd\u003e250' of 3\/8\" Three-Strand Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluke Angle\u003c\/td\u003e\n\u003ctd\u003eAdjustable 32° \/ 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchor Material\u003c\/td\u003e\n\u003ctd\u003eAluminum Magnesium Alloy, Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS: 20.8 lb \/ FX-11-AS: 24.6 lb \/ FX-16-AS: 32.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMade In\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eFX-7-AS: 647124120179 \/ FX-11-AS: 647124121114 \/ FX-16-AS: 647124000167\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime Parts Replacement (Anchor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fortress","offers":[{"title":"FX-7-AS - FX-7 4 lb Anchor (16-27 ft Boats)","offer_id":71198969626737,"sku":"FOR-FX-7-AS","price":546.99,"currency_code":"USD","in_stock":true},{"title":"FX-11-AS - FX-11 7 lb Anchor (28-32 ft Boats)","offer_id":71198969659505,"sku":"FOR-FX-11-AS","price":638.99,"currency_code":"USD","in_stock":true},{"title":"FX-16-AS - FX-16 10 lb Anchor (33-38 ft Boats)","offer_id":71198969692273,"sku":"FOR-FX-16-AS","price":690.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/fortress-fx-7-as-complete-anchoring-system-with-fx-7-anchor-chain-and-rope_d16208c8-b65d-43d7-a508-544d980af291.jpg?v=1794838691"},{"product_id":"taco-marine-tele-sun-carbon-fiber-shade-poles","title":"TACO Marine Tele-Sun Carbon Fiber Shade Poles with Carry Bag (Pair)","description":"\u003cp\u003eStay out longer at the sandbar with real shade. The TACO Marine Tele-Sun Carbon Fiber Shade Poles drop into your boat's rod holders and telescope from about 53\" to 80\" tall to stretch a sunshade off your T-top or hardtop, front or rear. Strong, light and flexible carbon fiber with an Awlgrip UV clear coat stands up to the marine environment, a cam cleat makes line tension easy to adjust, and a mesh bag keeps the pair together when stowed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Extends 52.89\" to 80.4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Carbon Fiber, Awlgrip UV Clear Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Deck Rod Holders, 1\/4\" Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Pair of Poles + Mesh Bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShade in Minutes\u003c\/h3\u003e\n\u003cp\u003eInsert the poles into your rod holders, secure your sunshade fabric to the boat top, attach the fabric connector to the poles and extend them into position. Setup and breakdown are quick, so you spend more time enjoying the water.\u003c\/p\u003e\n\u003ch3\u003eLight, Strong and Flexible\u003c\/h3\u003e\n\u003cp\u003eCarbon fiber is strong, lightweight and flexible, so the poles are easy to carry, install and stow and are built to withstand harsh marine conditions. A clear Awlgrip UV coat protects the finish from sun damage.\u003c\/p\u003e\n\u003ch3\u003eEasy Tension Adjustment\u003c\/h3\u003e\n\u003cp\u003eA cam cleat lets you fine-tune line tension in seconds, and an open hood design allows an alternative bungee-cord fabric clamping system if you prefer.\u003c\/p\u003e\n\u003ch3\u003ePatented Hardware\u003c\/h3\u003e\n\u003cp\u003eThe Tele-Sun uses TACO's patented 360° swivel collar (US 11,116,197) and patented locking mechanism (US 10,427,757) for smooth adjustment and secure height setting.\u003c\/p\u003e\n\u003ch3\u003eFront or Rear\u003c\/h3\u003e\n\u003cp\u003eMount the poles at the bow or stern depending on where you want shade, using standard deck-mounted rod holders.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSunshade fabric is not included; use your own canvas or a sunshade sized for your boat\u003c\/li\u003e\n\u003cli\u003eRequires deck-mounted rod holders with a 1-1\/2\" inside diameter and 1\/4\" cross pin\u003c\/li\u003e\n\u003cli\u003eTACO's 10° Flush Mount Rod Holder (F31-0702BXY) is a good match if you need to add holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Tele-Sun carbon fiber shade poles\u003c\/li\u003e\n\u003cli\u003eMesh carry bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTACO Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eT10-7005CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon Fiber, Awlgrip UV Clear Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight Range\u003c\/td\u003e\n\u003ctd\u003e52.89\" to 80.4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain Tube\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Tube\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRope Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod Holder Pin Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Rod Holder ID\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTension\u003c\/td\u003e\n\u003ctd\u003eCam Cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatents\u003c\/td\u003e\n\u003ctd\u003eUS 11,116,197; US 10,427,757\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e631040090364\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":71200228802673,"sku":"TACO-T10-7005CF","price":1789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/taco-tele-sun-carbon-fiber-shade-poles-pair_f81effd9-b87a-4f77-92d3-5b071604deaa.png?v=1794845082"},{"product_id":"taco-marine-neptune-ii-leaning-post","title":"TACO Marine Neptune II Leaning Post with Tackle Storage Bag","description":"\u003cp\u003eMade for smaller center consoles where every inch counts, the TACO Marine Neptune II Leaning Post gives you a comfortable place to lean or sit at the helm plus serious storage underneath. There's room under the seat for a 72-quart cooler with a securing strap, a removable soft-sided tackle storage bag you can grab and take ashore, four aluminum rod holders and a heavy-duty folding footrest. The anodized aluminum frame with grab rail is built to last. Ideal for boats under 25 feet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Size:\u003c\/strong\u003e Under 25'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 72-Qt Cooler Space + Removable Tackle Bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Holders:\u003c\/strong\u003e 4 Adjustable Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 14\" x 35\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage Where You Need It\u003c\/h3\u003e\n\u003cp\u003eThe open area under the seat holds a 72-quart cooler, secured with the included strap, so drinks, bait or the catch are right at the helm. The removable soft-sided tackle bag (also sold separately as L10-1003BAG) slides out for island hopping or long days away from the boat.\u003c\/p\u003e\n\u003ch3\u003eReady to Fish\u003c\/h3\u003e\n\u003cp\u003eFour adjustable aluminum rod holders keep rods within reach while you run or troll, and the anodized aluminum grab rail gives passengers a solid handhold in a chop.\u003c\/p\u003e\n\u003ch3\u003eComfort at the Helm\u003c\/h3\u003e\n\u003cp\u003eA cushioned seat upholstered in marine-grade vinyl resists mildew, fungus and UV, and the heavy-duty folding footrest supports up to 300 lb. Add TACO's Universal Leaning Post Backrest (L10-1002-1) for even more support.\u003c\/p\u003e\n\u003ch3\u003eSimple, Solid Installation\u003c\/h3\u003e\n\u003cp\u003eContinuous flat-bar mounting pads spread the load across the deck, and easy do-it-yourself assembly gets you on the water fast.\u003c\/p\u003e\n\u003ch3\u003eRecommended Add-Ons (Sold Separately)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTACO Universal Leaning Post Backrest (L10-1002-1)\u003c\/li\u003e\n\u003cli\u003eTACO Neptune Tackle Storage Bag (L10-1003BAG) as a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Neptune II leaning post with cushioned seat\u003c\/li\u003e\n\u003cli\u003eRemovable tackle storage bag\u003c\/li\u003e\n\u003cli\u003eCooler securing strap\u003c\/li\u003e\n\u003cli\u003eFolding footrest\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTACO Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eL10-1003-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoat Size\u003c\/td\u003e\n\u003ctd\u003eUnder 25'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height (A)\u003c\/td\u003e\n\u003ctd\u003e32-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (B)\u003c\/td\u003e\n\u003ctd\u003e35\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth (C)\u003c\/td\u003e\n\u003ctd\u003e26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e14\" x 35\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum With Grab Rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod Holders\u003c\/td\u003e\n\u003ctd\u003e4 Adjustable Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooler Storage\u003c\/td\u003e\n\u003ctd\u003eFits 72-Qt Cooler, Strap Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootrest\u003c\/td\u003e\n\u003ctd\u003eFolding, Supports up to 300 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpholstery\u003c\/td\u003e\n\u003ctd\u003eMarine-Grade Vinyl, Mildew \u0026amp; UV Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatent\u003c\/td\u003e\n\u003ctd\u003eUS 7,422,279\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e630838025403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":71200230047857,"sku":"TACO-L10-1003-1","price":2681.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/taco-neptune-ii-leaning-post-with-tackle-storage-bag_f85b3ef2-75e3-41d0-bec3-a8b9c578dd9b.jpg?v=1794845089"},{"product_id":"taco-marine-neptune-premium-leaning-post","title":"TACO Marine Neptune Premium Leaning Post with Fiberglass Storage Tray","description":"\u003cp\u003eDesigned for the serious angler, the TACO Marine Neptune Premium Leaning Post maximizes comfort and storage on small to mid-size boats up to 30 feet. A removable, hand-laid fiberglass storage tray makes it easy to organize and carry your tackle, four flush-mounted aluminum rod holders keep rods ready, and the space underneath fits a 72-quart cooler held in place with the included strap. A wrap-around grab rail, folding footrest and UV-resistant marine vinyl finish the package.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat Size:\u003c\/strong\u003e Up to 30'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Removable Fiberglass Tray + 72-Qt Cooler Space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Holders:\u003c\/strong\u003e 4 Flush-Mounted Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 15-1\/2\" x 35\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Storage Tray\u003c\/h3\u003e\n\u003cp\u003eThe removable hand-laid fiberglass deck tray keeps tackle, tools and gear organized and lifts out so you can carry everything to the dock or cleaning station.\u003c\/p\u003e\n\u003ch3\u003eCooler Space at the Helm\u003c\/h3\u003e\n\u003cp\u003eUnderneath, there's room for a 72-quart cooler, secured in place by the included strap, keeping drinks, bait or your catch within reach.\u003c\/p\u003e\n\u003ch3\u003eReady to Fish\u003c\/h3\u003e\n\u003cp\u003eFour flush-mounted aluminum rod holders are installed at 0° to keep rods upright and organized while running or trolling.\u003c\/p\u003e\n\u003ch3\u003eBuilt Right\u003c\/h3\u003e\n\u003cp\u003eDurable aluminum seat hinges, a wrap-around grab rail and continuous flat-bar mounting pads make for a solid post. The cushion uses mildew, fungus and UV-resistant marine-grade vinyl, and a folding footrest adds comfort on long runs.\u003c\/p\u003e\n\u003ch3\u003eAdd a Backrest\u003c\/h3\u003e\n\u003cp\u003eThe Neptune Premium accommodates TACO's Universal Leaning Post Backrest (L10-1002-1) for extra support.\u003c\/p\u003e\n\u003ch3\u003eRecommended Add-Ons (Sold Separately)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTACO Universal Leaning Post Backrest (L10-1002-1)\u003c\/li\u003e\n\u003cli\u003eTACO Leaning Post Cooler Strap (L10-1004) as a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Neptune Premium leaning post with cushioned seat\u003c\/li\u003e\n\u003cli\u003eRemovable fiberglass storage tray\u003c\/li\u003e\n\u003cli\u003eCooler securing strap\u003c\/li\u003e\n\u003cli\u003eFolding footrest\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTACO Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eL10-1001-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoat Size\u003c\/td\u003e\n\u003ctd\u003eUp to 30'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height (A)\u003c\/td\u003e\n\u003ctd\u003e33-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (B)\u003c\/td\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth (C)\u003c\/td\u003e\n\u003ctd\u003e27\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e15-1\/2\" x 35\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAluminum With Wrap-Around Grab Rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod Holders\u003c\/td\u003e\n\u003ctd\u003e4 Flush-Mounted Aluminum, 0°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Tray\u003c\/td\u003e\n\u003ctd\u003eRemovable Hand-Laid Fiberglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooler Storage\u003c\/td\u003e\n\u003ctd\u003eFits 72-Qt Cooler, Strap Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpholstery\u003c\/td\u003e\n\u003ctd\u003eMarine-Grade Vinyl, Mildew \u0026amp; UV Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e630838023294\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":71200231063665,"sku":"TACO-L10-1001-1","price":3198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/taco-neptune-premium-leaning-post_a2f1af25-ead4-4891-aa03-73437aaa54c7.png?v=1794845096"},{"product_id":"surfstow-suprax-sup-storage-rack-system-single-board","title":"SurfStow SUPRAX SUP Storage Rack System - Single Board, Rail Mount, Aluminum","description":"\u003cp\u003eKeep your paddleboard ready for the next anchorage without letting it take over your boat. The SurfStow SUPRAX 50050-2 is a complete single-board storage system for compatible tubular boat rails and stanchions. Two anodized aluminum cradles support the board on shaped EVA padding, while integrated heavy-duty shock cords retain it in the rack. Four adjustable clamps and fitting adapters accommodate 7\/8-inch, 1-inch and 1-1\/4-inch rails, according to Waterbrands' current product specifications. Ideal for recreational cruising and days at anchor, the system keeps bulky paddlesports gear organized while preserving valuable cockpit and deck space. An optional expansion kit lets you carry a second SUP as your needs grow.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e One Stand-Up Paddleboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Sandblasted Anodized 6061 Aluminum, EVA Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRails:\u003c\/strong\u003e Fits 7\/8 in, 1 in and 1-1\/4 in Rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Rotating Clamps for Straight Rails or Angled Stanchions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Fit Before You Buy\u003c\/h3\u003e\u003cp\u003eMeasure the outside diameter of your tubular rail and identify two suitable mounting locations. Adjustable clamps accommodate angled stanchions as well as straight rails, but rail strength, spacing and clearance still matter. For fully square pontoon rails, choose the dedicated 50053 pontoon system instead.\u003c\/p\u003e\u003ch3\u003eA More Organized Day on the Water\u003c\/h3\u003e\u003cp\u003eDedicated padded supports help avoid unnecessary contact between the board and hard boat surfaces. With the SUP stored alongside the vessel, passengers have more room to move and the board remains accessible when it is time to paddle.\u003c\/p\u003e\u003ch3\u003eFree Up Deck Space\u003c\/h3\u003e\n\u003cp\u003eStores your SUP upright against the rail of your boat instead of across the deck or cockpit, so there is more room for passengers and gear and less risk of tripping over or damaging the board.\u003c\/p\u003e\n\u003ch3\u003eBoard-Friendly Support\u003c\/h3\u003e\n\u003cp\u003eEach rack is lined with heat-pressed, die-cut EVA foam that cushions the board and helps protect the board’s contact surfaces from abrasion.\u003c\/p\u003e\n\u003ch3\u003eSecure Hold\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty shock cords wrap over the board and help retain it in the cradles.\u003c\/p\u003e\n\u003ch3\u003eFits Most Rails and Stanchions\u003c\/h3\u003e\n\u003cp\u003eFour articulating clamps attach to 7\/8 in, 1 in and 1-1\/4 in rails using the included fitting adapters. The rotating clamp lets you mount the racks on angled stanchions as well as straight rails.\u003c\/p\u003e\n\u003ch3\u003eCorrosion-Resistant Construction\u003c\/h3\u003e\n\u003cp\u003eRacks are made from 6061 aluminum alloy with a sandblasted, anodized finish for strength and long life on the water.\u003c\/p\u003e\n\u003ch3\u003eExpandable\u003c\/h3\u003e\n\u003cp\u003eAdd the SUPRAX Dual Board Add-On (50051) to carry a second board on the same racks.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\u003cp\u003eFollow the manufacturer’s installation instructions, inspect the mounting hardware and retention cords before departure, and verify that the equipment is secure and does not obstruct navigation or boarding. Remove the load if conditions or clearances make carrying it unsafe.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x mounting racks (anodized 6061 aluminum with EVA foam)\u003c\/li\u003e\n\u003cli\u003e4 x articulating rail clamps\u003c\/li\u003e\n\u003cli\u003eFitting adapters for supported rail diameters\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock cords\u003c\/li\u003e\n\u003cli\u003eMounting hardware and installation tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSurfStow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e50050-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBoat Rail-Mount SUP Storage Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1 Stand-Up Paddleboard (Expandable to 2 with 50051)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Material\u003c\/td\u003e\n\u003ctd\u003e6061 Aluminum Alloy, Sandblasted Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePadding\u003c\/td\u003e\n\u003ctd\u003eHeat-Pressed, Die-Cut EVA Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Retention\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Shock Cords\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Compatibility\u003c\/td\u003e\n\u003ctd\u003e7\/8 in, 1 in and 1-1\/4 in Rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 Articulating Clamps, Rotating for Angled Stanchions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Options\u003c\/td\u003e\n\u003ctd\u003eBoat Rails, Stanchions or Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd\u003e26 x 11 x 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e814154015540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SurfStow","offers":[{"title":"Default Title","offer_id":71232213778545,"sku":"SUR-50050-2","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/surfstow-suprax-sup-storage-rack-system-single-board-50050-2_6ce41d27-f982-4af9-b566-b210400df81b.jpg?v=1795005713"},{"product_id":"surfstow-suprax-sup-storage-system-dual-board-add-on","title":"SurfStow SUPRAX Dual Board Add-On Rack - Second SUP, Aluminum","description":"\u003cp\u003eBring a second paddleboard without starting over with an entirely new storage system. The SurfStow SUPRAX 50051 is an expansion kit for compatible single-board SUPRAX racks, designed for couples, families and boaters who want to carry two boards while keeping the deck open. Each of its two aluminum extensions provides an additional padded support point and comes with hardware and cords for securing the second board. The matching anodized finish and EVA cushioning integrate with the original rack design. This is an accessory kit, not a standalone rail-mounted rack; a compatible base system must already be installed or purchased separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdds:\u003c\/strong\u003e Capacity for a Second SUP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Sandblasted Anodized 6061 Aluminum, EVA Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e SUPRAX 50050-2 or 50053 Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 2 Add-On Racks, Hardware and Bungee Cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExpand Rather Than Replace\u003c\/h3\u003e\u003cp\u003eIf you already own the 50050-2 or 50053 single-board system, this kit lets you build on that investment. Check the existing rack, mounting rail and available outboard clearance before adding a second board. The extra equipment increases the load on the original mounts.\u003c\/p\u003e\u003ch3\u003eIs This the Right Product for You?\u003c\/h3\u003e\u003cp\u003eChoose this kit if you need one additional SUP position on a compatible existing rack. If you do not already have a base rack, purchase the appropriate single-board system first. For kayak storage, choose a dedicated XL system instead.\u003c\/p\u003e\u003ch3\u003eCarry Two Boards\u003c\/h3\u003e\n\u003cp\u003eBolts onto your existing SUPRAX racks to add a second cradle, so two paddleboards ride on the side of the boat instead of on deck.\u003c\/p\u003e\n\u003ch3\u003eMatching Construction\u003c\/h3\u003e\n\u003cp\u003eSandblasted, anodized 6061 aluminum and heat-pressed, die-cut EVA foam match the original SUPRAX racks for a clean look and the same board protection.\u003c\/p\u003e\n\u003ch3\u003eSimple Installation\u003c\/h3\u003e\n\u003cp\u003eThe included mounting hardware attaches the add-on racks to the single rack system, and bungee cords secure the second board.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eRequires the SUPRAX Single Board System (50050-2) or the SUPRAX Single SUP Pontoon Mount (50053). The base system is sold separately.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\u003cp\u003eFollow the manufacturer’s installation instructions, inspect the mounting hardware and retention cords before departure, and verify that the equipment is secure and does not obstruct navigation or boarding. Remove the load if conditions or clearances make carrying it unsafe.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x add-on racks (anodized 6061 aluminum with EVA foam)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eBungee cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSurfStow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e50051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSUP Rack Add-On (Second Board)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdds Capacity\u003c\/td\u003e\n\u003ctd\u003e1 Additional Stand-Up Paddleboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Material\u003c\/td\u003e\n\u003ctd\u003e6061 Aluminum Alloy, Sandblasted Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePadding\u003c\/td\u003e\n\u003ctd\u003eHeat-Pressed, Die-Cut EVA Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Retention\u003c\/td\u003e\n\u003ctd\u003eBungee Cords\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequires\u003c\/td\u003e\n\u003ctd\u003eSUPRAX 50050-2 Single Board System or 50053 Single SUP Pontoon Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e814154014826\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SurfStow","offers":[{"title":"Default Title","offer_id":71232222003313,"sku":"SUR-50051","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/surfstow-suprax-sup-storage-system-dual-board-add-on-50051_3a98f1fe-1936-4f2a-b7f0-2be89531d727.jpg?v=1795005715"},{"product_id":"surfstow-suprax-single-sup-pontoon-mount","title":"SurfStow SUPRAX Single SUP Pontoon Mount - Square Rail Clamps, Aluminum","description":"\u003cp\u003eMake your pontoon a better base for paddleboarding. The SurfStow SUPRAX 50053 carries a single stand-up paddleboard alongside the pontoon fence, leaving more usable room for family, friends and gear. Two padded aluminum cradles support the board, with integrated shock cords for retention and a tension-clamp mounting system designed specifically for fully square pontoon rails. It is an especially practical option for boaters who regularly alternate between cruising, swimming and paddling. If you plan to bring a second board later, the compatible 50051 expansion kit is available separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e One Stand-Up Paddleboard, All Shapes and Sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Square Pontoon Rail Tension Clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Anodized Aluminum Alloy, EVA Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e Add a Second Board with 50051\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnow Your Rail Profile Before Ordering\u003c\/h3\u003e\u003cp\u003eInspect the actual structural mounting rail rather than relying on the boat's make or model. Rounded, curved or otherwise non-square profiles are not compatible with this tension mount. Confirm clearance around gates, seating and docking points before choosing the installation location.\u003c\/p\u003e\u003ch3\u003eOne Board Now, Two Later\u003c\/h3\u003e\u003cp\u003eStart with a complete single-board system and expand it if your paddling needs change. The separately sold 50051 adds another cradle to each existing rack without requiring a second complete base system.\u003c\/p\u003e\u003ch3\u003eBuilt for Pontoon Boats\u003c\/h3\u003e\n\u003cp\u003eSquare rail clamps tension-mount the racks to the pontoon rail, so the board rides outside the fence and the deck stays open.\u003c\/p\u003e\n\u003ch3\u003eCheck Your Rails First\u003c\/h3\u003e\n\u003cp\u003eThe clamps only fit pontoon rails that are completely square. Some newer pontoon boats use rails that are not fully square, and the racks will not fit those rails. SurfStow's replacement square pontoon rail clamp (59002) fits rails up to 1-5\/8 in wide.\u003c\/p\u003e\n\u003ch3\u003eProtects Your Board\u003c\/h3\u003e\n\u003cp\u003eHeat-pressed, die-cut EVA foam lines each rack to cushion the board, and heavy-duty shock cords keep it secure.\u003c\/p\u003e\n\u003ch3\u003eDurable Aluminum\u003c\/h3\u003e\n\u003cp\u003eRacks are made from aluminum alloy and anodized for strength and corrosion resistance.\u003c\/p\u003e\n\u003ch3\u003eRoom to Grow\u003c\/h3\u003e\n\u003cp\u003eAdd the SUPRAX Dual Board Add-On (50051) to carry a second paddleboard on the same mounts.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\u003cp\u003eFollow the manufacturer’s installation instructions, inspect the mounting hardware and retention cords before departure, and verify that the equipment is secure and does not obstruct navigation or boarding. Remove the load if conditions or clearances make carrying it unsafe.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x SUPRAX racks with EVA foam\u003c\/li\u003e\n\u003cli\u003eSquare pontoon rail clamps\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock cords\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSurfStow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e50053\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePontoon Rail-Mount SUP Storage Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1 Stand-Up Paddleboard (Expandable to 2 with 50051)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Material\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePadding\u003c\/td\u003e\n\u003ctd\u003eHeat-Pressed, Die-Cut EVA Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Retention\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Shock Cords\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eTension Mount, Square Pontoon Rail Clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompletely Square Pontoon Rails Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Clamp\u003c\/td\u003e\n\u003ctd\u003eSurfStow 59002 (Fits Rails up to 1-5\/8 in Wide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd\u003e26 x 11 x 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e814154015601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SurfStow","offers":[{"title":"Default Title","offer_id":71232225214577,"sku":"SUR-50053","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/surfstow-suprax-single-sup-pontoon-mount-50053_a8e91218-1e43-4719-933f-b6f1ab0153ca.jpg?v=1795005717"},{"product_id":"surfstow-suprax-xl-kayak-2-sup-storage-system-pontoon-mount","title":"SurfStow SUPRAX XL Kayak and 2 SUP Storage Rack - Pontoon Mount, Aluminum","description":"\u003cp\u003eBring the kayak, the paddleboards and the whole crew without sacrificing usable deck space. The SurfStow SUPRAX XL 50061 gives pontoon owners a dedicated place to carry either one kayak or two stand-up paddleboards. Its wide, padded aluminum cradles support your equipment alongside the boat instead of across seating areas or walkways. Integrated shock cords provide retention, while pontoon-specific tension clamps connect the racks to compatible square railings. For two SUPs, check that their combined thickness is no more than 17 inches. This is a square-rail system, not a universal pontoon mount.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1 Kayak or 2 SUPs (17 in Max Combined Thickness)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Square Pontoon Rail Tension Clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Anodized Aluminum, EVA Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention:\u003c\/strong\u003e Heavy-Duty Shock Cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the Right Storage Configuration\u003c\/h3\u003e\u003cp\u003eUse the XL system for a single kayak or a pair of SUPs, rather than purchasing separate single-board racks. Before ordering, check the shape and thickness of your equipment, the available rail space and clearance from the water, dock and boarding areas.\u003c\/p\u003e\u003ch3\u003eMake More Room for Your Crew\u003c\/h3\u003e\u003cp\u003eMoving bulky paddlesports equipment off the deck leaves more space for coolers, seating and everyday movement around the pontoon. Position the cradles so the load is supported evenly and does not interfere with access or boat operation.\u003c\/p\u003e\u003ch3\u003eKayak or Two Boards\u003c\/h3\u003e\n\u003cp\u003eThe wide XL cradles hold one kayak or two paddleboards. If you are storing two boards, they cannot be more than 17 in thick in total.\u003c\/p\u003e\n\u003ch3\u003ePontoon Rail Mount\u003c\/h3\u003e\n\u003cp\u003eSquare pontoon rail clamps tension-mount the racks to the outside of the rail, freeing up deck space for passengers and gear.\u003c\/p\u003e\n\u003ch3\u003eCheck Your Rails First\u003c\/h3\u003e\n\u003cp\u003eThe clamps only fit pontoon rails that are completely square. Some newer pontoon boats use rails that are not fully square, and the racks will not fit those rails.\u003c\/p\u003e\n\u003ch3\u003eProtection and Security\u003c\/h3\u003e\n\u003cp\u003eEVA foam pads cushion the hull or boards, and heavy-duty shock cords keep them in place on the way to your destination.\u003c\/p\u003e\n\u003ch3\u003eBuilt to Last\u003c\/h3\u003e\n\u003cp\u003eAnodized construction resists corrosion for long-lasting use on fresh and salt water.\u003c\/p\u003e\n\u003ch3\u003eWall Storage Option\u003c\/h3\u003e\n\u003cp\u003eOptional SurfStow wall mounts (sold separately) let you use the racks to store your kayak or boards at home.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\u003cp\u003eFollow the manufacturer’s installation instructions, inspect the mounting hardware and retention cords before departure, and verify that the equipment is secure and does not obstruct navigation or boarding. Remove the load if conditions or clearances make carrying it unsafe.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x SUPRAX XL racks with EVA foam\u003c\/li\u003e\n\u003cli\u003eSquare pontoon rail clamps\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock cords\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSurfStow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e50061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePontoon Rail-Mount Kayak and SUP Storage Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1 Kayak or 2 Stand-Up Paddleboards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-Board Limit\u003c\/td\u003e\n\u003ctd\u003e17 in Maximum Combined Thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack Material\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePadding\u003c\/td\u003e\n\u003ctd\u003eEVA Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Retention\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Shock Cords\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eTension Mount, Square Pontoon Rail Clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompletely Square Pontoon Rails Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd\u003e26 x 22 x 5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e814154015625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SurfStow","offers":[{"title":"Default Title","offer_id":71232228458609,"sku":"SUR-50061","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/3793\/2401\/files\/surfstow-suprax-xl-kayak-and-2-sup-storage-system-with-pontoon-mount-50061_e6a96652-2354-4ab4-babc-2e6c16a0eff0.jpg?v=1795005719"}],"url":"https:\/\/boatandangler.com\/collections\/boat-outfitting.oembed","provider":"Boat \u0026 Angler","version":"1.0","type":"link"}