Balmar XT-Series 250A 12V Marine Alternator, K6 Pulley, Single or Dual Foot
- 250A from a small case
- Up to 186A at idle
- Smart Ready backup
- Single or dual foot
- Output 250A, 12V
- Idle Up to 186A
- Pulley K6 Serpentine
- Warranty 2-Year Limited
The Balmar XT-Series 250A packs large-frame output into a compact small-case alternator. Balmar's braided wire stator delivers up to 186 amps at idle and 250 amps at speed from a compact frame, the kind of output that keeps big lithium banks, inverters, air conditioning and electric galleys running. Dual internal fans keep it cool and Balmar's patented Smart Ready regulator provides backup regulation. This is the alternator only; pair it with a Balmar Max Charge MC-618 regulator for full multi-stage charging.
- Output: 250A, Up to 186A at Idle
- Stator: Braided Wire, 96 Slots
- Pulley: K6 Serpentine
- Mounts: 1-2" Single Foot or 3.15" Dual Foot
250 Amps in a Small Case
The XT-250 delivers output that traditionally required a large-frame alternator while keeping the compact XT-Series case, making high-output charging possible on engines with limited space.
Braided Stator Technology
XT-Series alternators use a braided wire stator with about 85% copper winding density, compared with roughly 70% for hairpin stators and 45% for traditional S-wound stators. That density makes the alternator more efficient, delivering more power at low RPM, more total output and cooler running. The XT-Series runs 5 to 10°C cooler than Balmar's earlier AT-Series alternators.
Massive Idle Output
Up to 186A at idle means meaningful charging even at low RPM, ideal for boats that run the engine at anchor or rely on the alternator to refill a large lithium bank quickly.
Smart Ready Regulation
Balmar's patented Smart Ready internal regulator holds 14.1 volts if the external regulator is ever disconnected or fails, giving you a built-in get-home backup. For full multi-stage charging of a large house bank, the alternator is controlled by an external Balmar Max Charge MC-618 regulator.
Choose Your Mount
- Single Foot 1-2" (XT-SF-250-K6): spindle mount for 1" Motorola-style or 2" Delco-style brackets, typical for Westerbeke, Lehman, Volvo Penta, Perkins and GM-based engines
- Dual Foot 3.15" (XT-DF-250-K6): Hitachi-style saddle mount, typical for Yanmar, Westerbeke, Lehman and Perkins-Sabre engines
Installation Notes
- This alternator requires an external Balmar MC-618 regulator for multi-stage charging (sold separately)
- At 6.6 HP of power take-off, confirm your engine and belt drive can handle a 250A alternator; a K6 or larger serpentine drive is recommended
- XT-Series alternators should only be used with dual vee or multi-groove serpentine belts; if your engine uses a single vee belt, a Balmar AltMount pulley conversion kit is required
- If your tachometer reads from the alternator and is not adjustable, you may need Balmar's Tachometer Signal Stabilizer (15-TSS)
- XT-Series alternators are case ground
- Upgrade charging cables and fusing to suit the higher output before installation
What’s Included
- 1 x Balmar XT-Series 250A 12V alternator with K6 pulley (mount per selection)
- Regulator, temperature sensors and mounting hardware are not included
| Brand | Balmar |
| Part Numbers | XT-SF-250-K6, XT-DF-250-K6 |
| Series | XT-Series |
| Rated Output | 250A |
| Idle Output | Up to 186A |
| Voltage | 12V |
| Output at 2000 Alt RPM (Hot) | 142A |
| Output at 6000 Alt RPM (Hot) | 215A |
| Mounting | 1-2" Single Foot Spindle or 3.15" Dual Foot Saddle |
| Pulley | K6 Serpentine |
| Power Take-Off | 6.6 HP |
| Cut-In Speed | 1,350 Alternator RPM |
| Max Alternator Speed | 18,000 RPM |
| Stator | Braided Wire, 16 Poles, 96 Slots |
| Field Type | P-Type, Positive Field Excitation |
| Internal Regulation | Smart Ready, 14.1V |
| External Regulator | Balmar MC-618 (Sold Separately) |
| Output Stud | M8 x 1.25 |
| Grounding | Case Ground |
| Certifications | USCG Title 33, SAE J1171, CE, ISO 8846 |
| Replaces | SF: AT-SF-200 / DF: AT-DF-200 |
| UPC | SF: 676205502368 / DF: 676205502283 |
| Warranty | 2-Year Limited |
| Brand | Balmar |
| Part Numbers | XT-SF-250-K6, XT-DF-250-K6 |
| Series | XT-Series |
| Rated Output | 250A |
| Idle Output | Up to 186A |
| Voltage | 12V |
| Output at 2000 Alt RPM (Hot) | 142A |
| Output at 6000 Alt RPM (Hot) | 215A |
| Mounting | 1-2" Single Foot Spindle or 3.15" Dual Foot Saddle |
| Pulley | K6 Serpentine |
| Power Take-Off | 6.6 HP |
| Cut-In Speed | 1,350 Alternator RPM |
| Max Alternator Speed | 18,000 RPM |
| Stator | Braided Wire, 16 Poles, 96 Slots |
| Field Type | P-Type, Positive Field Excitation |
| Internal Regulation | Smart Ready, 14.1V |
| External Regulator | Balmar MC-618 (Sold Separately) |
| Output Stud | M8 x 1.25 |
| Grounding | Case Ground |
| Certifications | USCG Title 33, SAE J1171, CE, ISO 8846 |
| Replaces | SF: AT-SF-200 / DF: AT-DF-200 |
| UPC | SF: 676205502368 / DF: 676205502283 |
| Warranty | 2-Year Limited |