Dolphin Charger PRO Evo3 Marine Battery Charger, 4 Outputs, 12V or 24V, NMEA 2000
- Four full-power outputs
- NMEA 2000 / CAN bus
- LiFePO4 lithium profiles
- Temp sensor included
- Output 12V 90A or 24V
- Banks 4 Full Power
- Network NMEA 2000
- Warranty 2-Year Limited
The Dolphin Charger PRO Evo3 is a high-output, network-ready charger for yachts, sportfishers and commercial boats with large battery banks. Four isolated outputs each deliver full power, a selector covers lead acid, AGM, gel and LiFePO4 lithium batteries, and the supplied battery temperature sensor adjusts charging voltage for conditions. Two CAN bus ports connect the charger to NMEA 2000 networks, so you can see charger status alongside your other onboard systems. With power factor correction, 92% efficiency, full output up to 122°F and dry contacts for remote on/off and alarms, the Evo3 is designed for demanding installations. Choose 12V 90A, 24V 40A or 24V 60A.
- Output: 12V 90A, 24V 40A or 24V 60A
- Outputs: 4 Isolated, Full Power
- Network: 2 x CAN Bus, NMEA 2000
- Efficiency: 92%, Power Factor Over 0.95
Four Full-Power Outputs
Each of the four isolated outputs can deliver the charger's full rated current, so a single deeply discharged bank charges just as fast as it would on a dedicated charger. The outputs are protected by automotive mini fuses.
Charging for Every Battery Type
A selector provides profiles for flooded lead acid, AGM, gel, marine and LiFePO4 lithium batteries using an I-U-o-U algorithm. The supplied external temperature sensor provides compensation of ±2.5 mV/°C so batteries are charged correctly in hot and cold conditions.
NMEA 2000 and CAN Connectivity
Two CAN bus ports (Micro-Fit 3.0) let you integrate the charger into an NMEA 2000 network and view its status on compatible displays.
Efficient, Clean Power
Active power factor correction (over 0.95) and 92% efficiency draw less current from the dock and keep generator loads down. The 12V 90A model accepts 115V or 230V AC; the 24V 60A model reduces its maximum draw to 1300 VA on 115V supply.
Built for Hot Engine Rooms
An adjustable-speed fan keeps the charger cool and quiet, and it delivers full rated output up to 122°F (50°C).
Remote Control and Alarms
Switch the charger on or off with the front push button or a remote dry contact, and use the two output alarm contacts to signal faults to an alarm panel. The LED panel shows charge state, power and alarms.
Choose Your Model
- 12V 90A (99454): for 12V banks of roughly 350-900 Ah
- 24V 40A (99474): for 24V banks of roughly 200-400 Ah
- 24V 60A (99464): for 24V banks of roughly 250-600 Ah
What’s Included
- Dolphin PRO Evo3 battery charger (model per selection)
- External battery temperature sensor
| Brand | Dolphin Charger |
| Model | 99454 (12V 90A), 99474 (24V 40A), 99464 (24V 60A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V or 24V |
| Output Current | 90A, 40A or 60A |
| Outputs | 4 Isolated, Full Power |
| Recommended Battery Capacity | 12V 90A: 350-900 Ah, 24V 40A: 200-400 Ah, 24V 60A: 250-600 Ah |
| AC Input | 115/230V AC ±15%, 50/60 Hz |
| Max Consumption | 12V 90A: 1450 VA, 24V 40A: 1300 VA, 24V 60A: 1950 VA (1300 VA at 115V) |
| Power Factor | Over 0.95 |
| Efficiency | 92% |
| Charge Algorithm | I-U-o-U |
| Battery Types | Lead Acid, AGM, Gel, Marine, LiFePO4 |
| Temperature Compensation | ±2.5 mV/°C, External Sensor Included |
| Fuses | T20A AC Input, Automotive Mini Output Fuses |
| Network | 2 x CAN Bus (Micro-Fit 3.0), NMEA 2000 |
| Display | LED Panel: State of Charge, Power, Alarms |
| Remote | On/Off Push Button or Dry Contact, 2 Output Alarm Contacts |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature, Auto Restart |
| Operating Temperature | 14°F to 131°F, Full Power to 122°F |
| Humidity | 10-95% Non-Condensing |
| Cooling | Adjustable-Speed Fan |
| Water Rating | IP22 (Dry Location) |
| Enclosure | ABS |
| AC Connection | WAGO Winsta 770-813 |
| DC Terminals | 4 x M8 |
| Dimensions (H x W x D) | 11.2 x 14.2 x 4.8 in |
| Weight | 9 lb |
| UPC | 99454: 786142994543 / 99474: 786142994741 / 99464: 786142994642 |
| Warranty | 2-Year Limited |
| Brand | Dolphin Charger |
| Model | 99454 (12V 90A), 99474 (24V 40A), 99464 (24V 60A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V or 24V |
| Output Current | 90A, 40A or 60A |
| Outputs | 4 Isolated, Full Power |
| Recommended Battery Capacity | 12V 90A: 350-900 Ah, 24V 40A: 200-400 Ah, 24V 60A: 250-600 Ah |
| AC Input | 115/230V AC ±15%, 50/60 Hz |
| Max Consumption | 12V 90A: 1450 VA, 24V 40A: 1300 VA, 24V 60A: 1950 VA (1300 VA at 115V) |
| Power Factor | Over 0.95 |
| Efficiency | 92% |
| Charge Algorithm | I-U-o-U |
| Battery Types | Lead Acid, AGM, Gel, Marine, LiFePO4 |
| Temperature Compensation | ±2.5 mV/°C, External Sensor Included |
| Fuses | T20A AC Input, Automotive Mini Output Fuses |
| Network | 2 x CAN Bus (Micro-Fit 3.0), NMEA 2000 |
| Display | LED Panel: State of Charge, Power, Alarms |
| Remote | On/Off Push Button or Dry Contact, 2 Output Alarm Contacts |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature, Auto Restart |
| Operating Temperature | 14°F to 131°F, Full Power to 122°F |
| Humidity | 10-95% Non-Condensing |
| Cooling | Adjustable-Speed Fan |
| Water Rating | IP22 (Dry Location) |
| Enclosure | ABS |
| AC Connection | WAGO Winsta 770-813 |
| DC Terminals | 4 x M8 |
| Dimensions (H x W x D) | 11.2 x 14.2 x 4.8 in |
| Weight | 9 lb |
| UPC | 99454: 786142994543 / 99474: 786142994741 / 99464: 786142994642 |
| Warranty | 2-Year Limited |