Dolphin Charger Pro Series 12V 90A Marine Battery Charger, 3 Isolated Outputs
- 90A for large 12V banks
- Three isolated outputs
- 9 programs incl. LiFePO4
- CAN bus, Touchview ready
- Output 12V 90A
- Banks 3 Isolated
- Programs 9 incl. LiFePO4
- Warranty 2-Year Limited
The Dolphin Charger Pro Series 12V 90A is a high-capacity marine charger for large 12V house banks on cruisers, trawlers and sportfishing boats. It accepts 115V or 230V AC with automatic switch-over and delivers 90 amps through three isolated outputs, enough to recharge battery banks of up to about 1000 Ah. Nine charging programs cover flooded, sealed, calcium, spiral-cell AGM and LiFePO4 lithium batteries with BMS, plus winterizing and power-supply modes. A powder-coated aluminum case, adjustable-speed fan, built-in CAN bus (J1939) and optional Touchview remote make it a capable centerpiece for a serious DC system.
- Output: 12V, 90A
- Outputs: 3 Isolated
- Input: 115/230V AC, Automatic Switch-Over
- Programs: 9, incl. LiFePO4 + BMS
Power for Big Battery Banks
With 90 amps of charging current, the Pro Series brings large house banks back up quickly, whether you are running an inverter, refrigeration and electronics at the dock or recharging after a night at anchor.
Nine Charging Programs
Choose from open lead acid, sealed lead acid, lead calcium, Delphi, spiral-cell AGM, winterizing lead acid, winterizing gel/AGM, power supply and LiFePO4 with BMS. The I-U-o-U curve holds voltage within ±2% with ripple under 1%.
Three Isolated Outputs
Charge three banks at once without them interacting, with the outputs protected by 30A automotive mini fuses.
Connectivity and Remote Control
Built-in CAN bus (J1939) with Micro-Fit and RJ9 ports supports the optional multi-color Touchview remote controller, and an output alarm contact can signal faults.
Temperature Compensation Ready
Connect the optional battery temperature sensor and the charger adjusts its voltage to battery temperature for safer, more complete charging.
Robust Construction
A powder-coated aluminum case, adjustable-speed fan and protection against current overload, short circuit, over-voltage, reverse polarity and over-temperature keep the charger running reliably.
What’s Included
- Dolphin Pro Series 12V 90A battery charger
| Brand | Dolphin Charger |
| Model | 99501 |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 90A |
| Outputs | 3 Isolated |
| Max Battery Capacity | Up to Approx. 1000 Ah |
| AC Input | 115/230V AC ±15%, Automatic Switch-Over, 50/60 Hz |
| Max Input Current | 16A at 115V, 7A at 230V |
| Power Factor | Over 0.9 Typical |
| Efficiency | 83% |
| Charge Curve | I-U-o-U, Voltage ±2%, Ripple Under 1% |
| Charging Programs | Open Lead Acid, Sealed Lead Acid, Lead Calcium, Delphi, Spiral-Cell AGM, Winterizing Lead Acid, Winterizing Gel/AGM, Power Supply, LiFePO4 with BMS |
| Fuses | T20A AC Input, 4 x 30A Automotive Mini Output |
| Display | LED, Optional Touchview Remote |
| Network | CAN Bus (J1939), Micro-Fit and RJ9 |
| Alarm Contact | Output, 1A 30V Normally Open |
| Temperature Sensor | Optional |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Operating Temperature | 14°F to 122°F |
| Humidity | 10-95% Non-Condensing |
| Water Rating | IP22 |
| Cooling | Adjustable-Speed Fan |
| Housing | Powder-Coated Aluminum |
| Mounting | Wall, 4 x #8 Screws |
| AC Connection | 3-Pin Cage Terminal, 10 AWG Max |
| DC Connection | 4 x 5/16" Terminal Bolts |
| Dimensions (W x H x D) | 13-7/16 x 14-1/4 x 5 in |
| Weight | 13-1/4 lb |
| UPC | 786142995014 |
| Warranty | 2-Year Limited |
| Brand | Dolphin Charger |
| Model | 99501 |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 90A |
| Outputs | 3 Isolated |
| Max Battery Capacity | Up to Approx. 1000 Ah |
| AC Input | 115/230V AC ±15%, Automatic Switch-Over, 50/60 Hz |
| Max Input Current | 16A at 115V, 7A at 230V |
| Power Factor | Over 0.9 Typical |
| Efficiency | 83% |
| Charge Curve | I-U-o-U, Voltage ±2%, Ripple Under 1% |
| Charging Programs | Open Lead Acid, Sealed Lead Acid, Lead Calcium, Delphi, Spiral-Cell AGM, Winterizing Lead Acid, Winterizing Gel/AGM, Power Supply, LiFePO4 with BMS |
| Fuses | T20A AC Input, 4 x 30A Automotive Mini Output |
| Display | LED, Optional Touchview Remote |
| Network | CAN Bus (J1939), Micro-Fit and RJ9 |
| Alarm Contact | Output, 1A 30V Normally Open |
| Temperature Sensor | Optional |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Operating Temperature | 14°F to 122°F |
| Humidity | 10-95% Non-Condensing |
| Water Rating | IP22 |
| Cooling | Adjustable-Speed Fan |
| Housing | Powder-Coated Aluminum |
| Mounting | Wall, 4 x #8 Screws |
| AC Connection | 3-Pin Cage Terminal, 10 AWG Max |
| DC Connection | 4 x 5/16" Terminal Bolts |
| Dimensions (W x H x D) | 13-7/16 x 14-1/4 x 5 in |
| Weight | 13-1/4 lb |
| UPC | 786142995014 |
| Warranty | 2-Year Limited |