Dolphin Charger ProLite IP65 12V Marine Battery Charger, 15A 2-Bank or 25A 3-Bank
- IP65 sealed, fanless case
- LiFePO4 lithium ready
- Bluetooth app control
- Pre-wired 6 ft cables
- Output 12V 15A or 25A
- Water Rating IP65
- Batteries Lead, AGM, Gel, LiFePO4
- Warranty 2-Year Limited
The Dolphin Charger ProLite is a sealed, fanless on-board battery charger for boats where the charger has to live with spray, humidity and salt air. Its anodized aluminum case is rated IP65 and cooled by natural convection, so there is no fan to clog or corrode, and it is ISO 8846 ignition protected for installation near gasoline engines. Inside, a 3-stage I-U-o-U charging algorithm with four selectable battery profiles, including LiFePO4 lithium with BMS, charges each bank accurately through fully isolated outputs. You can set it up with the front push button or from your phone with the Dolphin Connect app over Bluetooth, and both versions arrive pre-wired with 6 ft AC and DC cables for a fast, tidy installation. Choose the 15A model with two outputs for smaller boats, or the 25A model with three outputs for engine, house and trolling motor banks.
- Output: 12V, 15A (2 Banks) or 25A (3 Banks)
- Protection: IP65 Waterproof, ISO 8846 Ignition Protected
- Batteries: Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 + BMS
- Control: Front Button or Dolphin Connect Bluetooth App
Sealed, Fanless Design
The IP65 anodized aluminum housing protects the electronics against dust and water jets, and natural convection cooling means there is no fan to draw in damp, salty air. The charger runs silently and is suited to engine compartments, lockers and consoles on center consoles, bass boats, bay boats and pontoons.
Multi-Chemistry Charging
Selectable charging profiles cover open (flooded) lead acid, lead calcium, AGM and gel batteries, plus LiFePO4 lithium batteries with a battery management system (BMS), so one charger suits your batteries today and after a lithium upgrade. Output voltage is held within ±2% with less than 1% ripple, and the charger can start charging a deeply discharged battery from 0 volts.
3-Stage I-U-o-U Algorithm
Bulk, absorption and float stages bring each battery back to full charge quickly and then hold it safely at float, so the charger can stay connected while the boat sits at the dock or on the trailer.
Isolated Outputs
Each output is isolated, so batteries at different states of charge are charged independently without draining into one another. The 15A model has two outputs and the 25A model has three.
Dolphin Connect App
Use the Dolphin Connect app over Bluetooth to select battery type, check charging status and adjust settings from your phone, or use the push button and tri-color LED on the front panel.
Pre-Wired for Easy Installation
Both models come with a 6 ft three-wire AC cord with a US NEMA 5-15 plug and 6 ft DC battery leads with 5/16" ring terminals, so there is no need to open the case to wire it. The charger mounts on a wall or bulkhead with two #8 screws.
Built-In Protection
Output current limiting, short circuit, over-voltage, reverse polarity and over-temperature protection guard the charger and your batteries. If the ambient temperature climbs, the charger automatically reduces its output rather than shutting down.
Choose Your Model
- 15A, 2 outputs (99215): 115V AC input, for single or dual battery boats
- 25A, 3 outputs (99225): 115/230V AC input, for engine, house and trolling motor banks
What’s Included
- ProLite marine battery charger (model per selection)
- 6 ft AC power cord with NEMA 5-15 plug
- 6 ft pre-wired DC battery leads with 5/16" ring terminals
| Brand | Dolphin Charger |
| Model | 99215 (12V 15A), 99225 (12V 25A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 15A or 25A (±5%) |
| Outputs | 2 Isolated (15A), 3 Isolated (25A) |
| AC Input | 115V AC ±10% (15A), 115/230V AC ±10% (25A), 50/60 Hz |
| Max Input Current | 4A at 115V |
| Efficiency | Over 90% |
| Charge Algorithm | 3-Stage I-U-o-U |
| Battery Types | Open Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 with BMS |
| Voltage Accuracy | ±2%, Ripple Under 1% |
| Control | Front Push Button, Dolphin Connect App (Bluetooth) |
| Display | Tri-Color LED |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Operating Temperature | 14°F to 131°F (-10°C to +55°C), Automatic Derating |
| Storage Temperature | -4°F to 158°F |
| Water Rating | IP65 |
| Ignition Protection | ISO 8846 |
| Cooling | Natural Convection (Fanless) |
| Housing | Anodized Aluminum |
| AC Connection | 6 ft, 3-Wire AWG 19, NEMA 5-15 Plug |
| DC Connection | 6 ft Pre-Wired Leads, 5/16" Ring Terminals |
| Mounting | Wall or Bulkhead, 2 x #8 Screws |
| Dimensions (W x H x D) | 15A: 5.59 x 2.83 x 7.65 in, 25A: 5.59 x 2.83 x 9.61 in |
| Weight | 15A: 3.1 lb, 25A: 3.8 lb |
| UPC | 99215: 786142992150 / 99225: 786142992259 |
| Warranty | 2-Year Limited |
| Brand | Dolphin Charger |
| Model | 99215 (12V 15A), 99225 (12V 25A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 15A or 25A (±5%) |
| Outputs | 2 Isolated (15A), 3 Isolated (25A) |
| AC Input | 115V AC ±10% (15A), 115/230V AC ±10% (25A), 50/60 Hz |
| Max Input Current | 4A at 115V |
| Efficiency | Over 90% |
| Charge Algorithm | 3-Stage I-U-o-U |
| Battery Types | Open Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 with BMS |
| Voltage Accuracy | ±2%, Ripple Under 1% |
| Control | Front Push Button, Dolphin Connect App (Bluetooth) |
| Display | Tri-Color LED |
| Protection | Current Limit, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Operating Temperature | 14°F to 131°F (-10°C to +55°C), Automatic Derating |
| Storage Temperature | -4°F to 158°F |
| Water Rating | IP65 |
| Ignition Protection | ISO 8846 |
| Cooling | Natural Convection (Fanless) |
| Housing | Anodized Aluminum |
| AC Connection | 6 ft, 3-Wire AWG 19, NEMA 5-15 Plug |
| DC Connection | 6 ft Pre-Wired Leads, 5/16" Ring Terminals |
| Mounting | Wall or Bulkhead, 2 x #8 Screws |
| Dimensions (W x H x D) | 15A: 5.59 x 2.83 x 7.65 in, 25A: 5.59 x 2.83 x 9.61 in |
| Weight | 15A: 3.1 lb, 25A: 3.8 lb |
| UPC | 99215: 786142992150 / 99225: 786142992259 |
| Warranty | 2-Year Limited |