Faria Chesapeake White SS 2" Depth Sounder with Transom Transducer
- Fits a 2in gauge hole
- Reads 3 to 199 feet
- Shallow & deep alarms
- Transducer included
- Depth 3 to 199 ft
- Size 2in Gauge
- Transducer Transom Mount
- Warranty 1-Year Limited
Know exactly how much water is under your hull with the Faria Chesapeake White SS 2" Depth Sounder. It fits a standard 2" gauge hole, so it slips into your dash right alongside your other gauges, and its oversized backlit digital display reads depth from 3 to 199 feet in feet or meters. Audible and visual shallow and deep water alarms warn you before you run aground, and a programmable keel offset lets you read depth from your keel or the surface. Its white dial with blue and white graphics, polished stainless steel bezel and domed glass lens match the rest of a Chesapeake SS dash, and a 235 kHz transom mount transducer with 25' of cable is included.
- Depth Range: 3 to 199 ft (1 to 61 m)
- Display: Oversized Backlit Digital
- Alarms: Shallow & Deep, Audible & Visual
- Transducer: Transom Mount, 25' Cable, Included
Fits Any 2" Gauge Hole
Unlike a fishfinder that needs a bracket or flush mount, this depth sounder installs in the same 2-1/16" (53 mm) hole as a standard 2" gauge, so you can add depth to your dash without cutting a large opening or giving up console space.
Readable Day or Night
The oversized digital display is backlit for night use and easy to read in daylight, and automatic gain control keeps readings steady as bottom conditions change. Depth can be displayed in feet or meters.
Alarms That Keep You Off the Bottom
Set a shallow alarm for skinny water, inlets and sandbars, and a deep alarm for drop-offs or anchoring. Both sound an audible alert and show a visual warning on the display.
Keel Offset
Program a keel offset so the display shows the water under your keel or lower unit, or the true depth from the surface, whichever matters most for your boat.
Matches Your Chesapeake SS Dash
The white dial, blue and white graphics and polished stainless steel bezel match Faria's Chesapeake White SS gauges for a clean, factory-installed look.
Installation Notes
- The gauge installs in a 2-1/16" (53 mm) hole, the same as a standard 2" gauge
- Mount the transducer on the transom where water flows smoothly and stays clear of strakes, rivets and the propeller's turbulence
- Route the 25' transducer cable away from engine and ignition wiring to avoid interference
- Gauge cover not included
What’s Included
- 1 x Chesapeake White SS 2" depth sounder gauge
- 1 x Faria SN2011 transom mount transducer, 235 kHz, with 25' cable
| Brand | Faria Beede Instruments |
| Part Number | 13850 |
| Factory P/N | DS0110 |
| Series | Chesapeake White SS |
| Gauge Size | 2" |
| Cutout Size | 2-1/16" (53 mm) |
| Depth Range | 3-199 ft (1-61 m) |
| Units | Feet or Meters |
| Display | Backlit Digital |
| Alarms | Shallow & Deep, Audible & Visual |
| Keel Offset | Programmable |
| Gain | Automatic Gain Control |
| Transducer | Faria SN2011 Transom Mount, 235 kHz, 25' Cable |
| Bezel | Polished Stainless Steel |
| Lens | Domed Glass, Anti-Fog, Scratch Resistant |
| Voltage | 12/24 V |
| Shipping Weight | 2 lb |
| UPC | 759266138506 |
| Warranty | Gauge: 1-Year Limited / Transducer: 2-Year Limited |
| Brand | Faria Beede Instruments |
| Part Number | 13850 |
| Factory P/N | DS0110 |
| Series | Chesapeake White SS |
| Gauge Size | 2" |
| Cutout Size | 2-1/16" (53 mm) |
| Depth Range | 3-199 ft (1-61 m) |
| Units | Feet or Meters |
| Display | Backlit Digital |
| Alarms | Shallow & Deep, Audible & Visual |
| Keel Offset | Programmable |
| Gain | Automatic Gain Control |
| Transducer | Faria SN2011 Transom Mount, 235 kHz, 25' Cable |
| Bezel | Polished Stainless Steel |
| Lens | Domed Glass, Anti-Fog, Scratch Resistant |
| Voltage | 12/24 V |
| Shipping Weight | 2 lb |
| UPC | 759266138506 |
| Warranty | Gauge: 1-Year Limited / Transducer: 2-Year Limited |