Rule Dry Bilge Self-Priming Pump with Panel Switch - 12V, 4.0 GPM, DB412
- Pumps bilge almost dry
- Self-priming to 9.5 ft
- Runs dry without damage
- Panel switch included
- Leaves 1/8 in or Less
- Self-Priming 9.5 ft
- Flow 4.0 GPM
- Warranty 3-Year Limited
A dry bilge is a clean, odorless bilge. The Rule Dry Bilge Pump DB412 is designed to remove almost all of the water a standard centrifugal bilge pump leaves behind, taking the bilge down to 1/8 in or less to keep it fresh, clean and dry. This compact 12V pump is self-priming to 9.5 ft, can run dry without damage, and has a filter-free design with built-in backflow prevention. A rotating pump head and ports simplify installation, and the kit includes a dry bilge panel switch and a 3/4 in 90-degree plastic thru-hull fitting.
- Leaves: 1/8 in of Water or Less
- Self-Priming: Up to 9.5 ft (3 m)
- Flow: Up to 4.0 GPM (15 LPM)
- Included: Panel Switch and 90-Degree Thru-Hull
Drains the Bilge Almost Dry
Where a submersible bilge pump leaves standing water below its intake, the Dry Bilge pump draws the bilge down to 1/8 in or less, cutting odor, mildew and grime.
Self-Priming and Run-Dry Safe
The pump primes itself with up to 9.5 ft (3 m) of suction lift and can run dry without damaging the pump, so it is not harmed when the bilge is empty.
Filter-Free Design
There is no filter to clean or replace, and built-in backflow prevention stops water from returning through the discharge.
Simple Installation
- Rotating pump head and ports for easy hose routing
- Connections for 3/4 in (19 mm) hose barbs
- 3/4 in (19 mm) plastic 90-degree thru-hull fitting included
- Dry bilge on/off panel switch included
- Compact, simple design for a dry, accessible mounting location
Not a Submersible Pump
Mount the DB412 in a clean, dry location above the bilge water, with the pickup hose running down to the low point of the bilge. It complements, and does not replace, your primary submersible bilge pumps.
What’s Included
- Rule Dry Bilge pump
- Dry bilge panel switch
- 3/4 in (19 mm) plastic 90-degree thru-hull fitting
| Brand | Rule |
| Model | DB412 |
| Type | Self-Priming Dry Bilge Pump |
| Voltage | 12V DC |
| Amp Draw | 8 A |
| Fuse | 10 A |
| Maximum Flow | 4.0 GPM (15 LPM) |
| Self-Priming Suction Lift | Up to 9.5 ft (3 m) |
| Residual Water | 1/8 in (3 mm) or Less |
| Hose Connections | 3/4 in (19 mm) Hose Barbs |
| Run Dry | Yes, Without Damage |
| Control | Panel Switch (Included) |
| Submersible | No |
| Warranty | 3-Year Limited |
| Brand | Rule |
| Model | DB412 |
| Type | Self-Priming Dry Bilge Pump |
| Voltage | 12V DC |
| Amp Draw | 8 A |
| Fuse | 10 A |
| Maximum Flow | 4.0 GPM (15 LPM) |
| Self-Priming Suction Lift | Up to 9.5 ft (3 m) |
| Residual Water | 1/8 in (3 mm) or Less |
| Hose Connections | 3/4 in (19 mm) Hose Barbs |
| Run Dry | Yes, Without Damage |
| Control | Panel Switch (Included) |
| Submersible | No |
| Warranty | 3-Year Limited |