Scotty 1116 Propack Depthpower Electric Downrigger, 60" Telescoping Boom, Dual Rod Holders
- Dual rod holders
- 36"-60" telescoping boom
- 235 ft/min on just 4 amps
- Swivel base included
- Retrieval Up to 235 ft/min
- Boom 36"-60" Telescoping
- Line 250 ft of 150 lb Stainless
- Amp Draw As Low as 4 A
The Scotty 1116 Propack Depthpower Electric Downrigger is built for anglers who want two rods working off one downrigger. It combines a 36”–60” telescoping stainless boom with Scotty’s No. 247 dual rod holder and a 16-position swivel pedestal mount. The efficient Depthpower drive lifts a 7 lb weight at 235 ft/min on just 4 amps, and it comes pre-spooled with 250 ft of 150 lb stainless cable.
- Retrieval: Up to 235 ft/min
- Boom: 36”–60” Telescoping
- Line: 250 ft of 150 lb Stainless
- Amp Draw: As Low as 4 A
Fast, Efficient Depthpower Retrieval
The Depthpower’s positive-drive system retrieves quickly while drawing very little current, so it is easy on your batteries during long trolling days. Scotty rates it among the lowest amperage draws of any downrigger, with less than one-third the battery draw of some competitors. Rated speeds and current draw:
- 7 lb weight: 235 ft/min at 4 amps
- 10 lb weight: 222 ft/min at 5 amps
- 15 lb weight: 203 ft/min at 8 amps
36”–60” Telescoping Stainless Steel Boom
The 1 1/4” diameter marine-grade stainless boom extends to 60” to spread your lines and keep cables clear of the motor and transom, then collapses to 36” for docking, trailering and storage.
250 ft of 150 lb Stainless Steel Cable
It comes pre-spooled with 250 ft of premium 150 lb test stainless steel downrigger cable, plenty of capacity for salmon, lake trout and walleye trolling.
Spray-Protected Depth Counter
A spray-protected, positive-drive mechanical depth counter shows exactly how much line is out, so you can return your baits to the same productive depth every time.
Kevlar Drive Belt by Optibelt
Power reaches the spool through a 1/2” Kevlar-reinforced drive belt made by Optibelt™, for smooth, quiet, efficient operation trip after trip.
Clutch Brake and Adjustable Descent
Scotty’s clutch brake has one of the largest braking surfaces in the industry. It lets you lower the weight at any speed you choose: slow and even to avoid tangles, or fast when you need a lure deep in a hurry. The clutch also slips under heavy load to protect your gear if the weight snags bottom.
Hands-Free Auto-Stop
Flip the switch and the downrigger retrieves the weight and stops automatically at the surface. Add Scotty stopper beads to the cable to stop at any preset depth, which is perfect for stacking lines or resetting to a proven depth.
No. 247 Dual Rod Holder
The included No. 247 dual rod holder carries two 10” tube-style rod holders, so you can stack two lines off one downrigger at different depths, or pair a downrigger rod with a high line, with both rod tips in clear view.
Swivel Pedestal Mount and Tilt-Up Bracket
The included No. 1026 swivel pedestal mount rotates a full 360° and locks into 16 positions, so you can swing the boom out to fish and back in to land fish or store. The No. 1023 tilt-up mounting bracket lets you tilt the unit upright and lock it for docking, washdowns and trailering.
Plug-In 12V Power
A Scotty/Marinco® 12V plug and receptacle make installation as simple as plugging in an appliance. Remove the downrigger when you are done and the receptacle stays neatly on the boat.
Fully Assembled with Saltwater Protection
Every Scotty downrigger arrives fully assembled and is factory and field tested, with complete saltwater protection for use on the Great Lakes, inland waters and the ocean.
What’s Included
- 1116 Propack Depthpower electric downrigger with 36”–60” telescoping boom
- 250 ft of 150 lb stainless steel cable (pre-spooled)
- No. 247 dual rod holder
- 2 Power Grip Plus line releases
- Weight storage hook (No. 1148)
- No. 1026 swivel pedestal mount
- No. 1023 tilt-up mounting bracket
- Scotty/Marinco 12V plug and receptacle
Buying and Setup Notes
Before installing, check mounting-surface strength, clearance and compatibility with your boat's existing rod holders or tracks. Consider boom reach, the supplied cable or braid, trolling-weight rating and whether the rod-holder arrangement fits your fishing style. Keep hands clear of the working line while retrieving weights. Follow the manufacturer's fastener and operating guidance.
| Brand | Scotty |
| Model | 1116 |
| Series | Depthpower |
| Type | Electric Downrigger |
| Boom Length | 36”–60” Telescoping |
| Boom Diameter | 1 1/4” |
| Boom Material | Stainless Steel |
| Downrigger Line | 250 ft, 150 lb Test Stainless Steel Cable |
| Retrieval Speed | 235 ft/min (7 lb) / 222 ft/min (10 lb) / 203 ft/min (15 lb) |
| Amperage Draw | 4 A (7 lb) / 5 A (10 lb) / 8 A (15 lb) |
| Counter | Mechanical, Spray-Protected Positive Drive |
| Drive | Kevlar Belt by Optibelt |
| Rod Holder | No. 247 Dual, Two 10” Tube-Style |
| Rod Holder Inside Diameter | 2 1/8” |
| Mount | No. 1026 Swivel Pedestal (16 Positions) + No. 1023 Tilt-Up Bracket |
| Power | 12V, Scotty/Marinco Plug & Receptacle, 40” Cord |
| Auto-Stop | Yes, Multi-Position |
| UPC | 062017011165 |
| Made In | Canada |
| Water | Freshwater & Saltwater |
| Warranty | Limited Lifetime |
| Brand | Scotty |
| Model | 1116 |
| Series | Depthpower |
| Type | Electric Downrigger |
| Boom Length | 36”–60” Telescoping |
| Boom Diameter | 1 1/4” |
| Boom Material | Stainless Steel |
| Downrigger Line | 250 ft, 150 lb Test Stainless Steel Cable |
| Retrieval Speed | 235 ft/min (7 lb) / 222 ft/min (10 lb) / 203 ft/min (15 lb) |
| Amperage Draw | 4 A (7 lb) / 5 A (10 lb) / 8 A (15 lb) |
| Counter | Mechanical, Spray-Protected Positive Drive |
| Drive | Kevlar Belt by Optibelt |
| Rod Holder | No. 247 Dual, Two 10” Tube-Style |
| Rod Holder Inside Diameter | 2 1/8” |
| Mount | No. 1026 Swivel Pedestal (16 Positions) + No. 1023 Tilt-Up Bracket |
| Power | 12V, Scotty/Marinco Plug & Receptacle, 40” Cord |
| Auto-Stop | Yes, Multi-Position |
| UPC | 062017011165 |
| Made In | Canada |
| Water | Freshwater & Saltwater |
| Warranty | Limited Lifetime |