T-H Marine ATLAS Micro Jacker Hydraulic Jack Plate, 4" Setback, Up to 115 HP
- Lightest hydraulic jack plate
- Lifts in about 8 seconds
- Up to 115 HP / 425 lbs
- Only 23 lbs, 4" setback
- Max Outboard 115 HP / 425 lbs
- Setback 4 in
- Hydraulic Lift 5 in in about 8 Seconds
- Weight 23 lbs
The T-H Marine ATLAS® Micro Jacker is the smallest and lightest hydraulic jack plate on the market, built for small outboards up to 115 HP and 425 lbs. It weighs just 23 lbs, lifts in about 8 seconds and gives you push-button height control. You can run skinny water with confidence in Gheenoes, river runners, jon boats and skiffs.
- Max Outboard: 115 HP / 425 lbs
- Setback: 4”
- Hydraulic Lift: 5”, Lifts in ~8 Seconds
- Weight: Only 23 lbs
Push-Button Hydraulic Lift
Raise the motor on the fly to clear shallow flats, stumps and sandbars, then drop it back down for full bite. The Micro Jacker lifts its full travel in about 8 seconds, so you can get out of trouble fast.
Self-Contained Hydraulics
A factory-tested high-speed hydraulic actuator is built into the plate. There are no separate pumps, reservoirs or hoses to mount and plumb.
Small, Light Footprint
At only 14-5/8” wide and 11-1/2” high and weighing 23 lbs, the Micro Jacker fits tight transoms and adds minimal weight to small boats.
About 8.5” of Total Height Adjustment
With the Micro Jacker installed you have about 8.5” of height range to work with. That is 1.5” of adjustment at the transom, 1.0” on the motor side, 1.0” with the motor and 5” of hydraulic lift.
Clamp-On Motor Adapter Available
Smaller outboards with clamp-on brackets do not use the standard bolt pattern. The optional Clamp-On Motor Adapter (AHJM-CMA-DP), sold separately, lets them mount to the Micro Jacker.
Check Your Outboard Before Ordering
Confirm your outboard is no more than 115 HP and 425 lbs dry weight. T-H Marine notes that Honda’s 115 HP outboard exceeds the weight limit and cannot be used. A position gauge is not available for the Micro Jacker.
What’s Included
- 1 × T-H Marine ATLAS® Micro Jacker 4” Hydraulic Jack Plate (AHJM-4-DP)
- Clamp-on motor adapter (AHJM-CMA-DP) sold separately
Buying and Setup Notes
Verify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.
| Brand | T-H Marine |
| Model | ATLAS® Micro Jacker™ |
| Part Number | AHJM-4-DP |
| Type | Hydraulic Jack Plate |
| Setback | 4” |
| Hydraulic Lift | 5” |
| Total Height Range | About 8.5” |
| Lift Time | About 8 Seconds |
| Max Outboard Weight | 425 lbs (Dry) |
| Max Outboard Power | 115 HP |
| Width | 14-5/8” |
| Height | 11-1/2” |
| Weight | 23 lbs |
| Hydraulic Fluid | ISO100 or SAE 20/30 Non-Detergent Oil |
| Gauge Compatibility | Not Available |
| UPC | 733572073201 |
| Warranty | 1 Year Limited |
| Brand | T-H Marine |
| Model | ATLAS® Micro Jacker™ |
| Part Number | AHJM-4-DP |
| Type | Hydraulic Jack Plate |
| Setback | 4” |
| Hydraulic Lift | 5” |
| Total Height Range | About 8.5” |
| Lift Time | About 8 Seconds |
| Max Outboard Weight | 425 lbs (Dry) |
| Max Outboard Power | 115 HP |
| Width | 14-5/8” |
| Height | 11-1/2” |
| Weight | 23 lbs |
| Hydraulic Fluid | ISO100 or SAE 20/30 Non-Detergent Oil |
| Gauge Compatibility | Not Available |
| UPC | 733572073201 |
| Warranty | 1 Year Limited |