TACO Marine Grand Slam 280 Outrigger Mounts, 1-1/2" (Pair)
- Industry-standard top mount
- Locks with zero slop
- 180° swing from under top
- Port & starboard pair
- Pole Size 1-1/2in
- Boats 20 to 36 ft
- Positions 12 Locking
- Warranty 3-Year Limited
The TACO Marine Grand Slam 280 is one of the most popular outrigger mounts ever built, and for good reason. Now in its fourth generation, this top mount pairs cast Type-316L stainless steel with machined, anodized aluminum for a base that stays tight and quiet season after season in hard saltwater use. Raise, lower and swing your outriggers out from under the T-top, lock them into position with zero slop, and run a wider, cleaner trolling spread on center consoles and sportfishing boats from 20 to 36 feet. Sold as a port and starboard pair.
- Pole Size: 1-1/2" Outriggers (1-1/8" With Reducer)
- Boat Size: 20' to 36' Fishing Boats
- Construction: 316L Stainless & Anodized Aluminum
- Adjustment: 12 Locking Positions, 180° Swing
Built for Serious Offshore Fishing
The GS-280 is a staple on center consoles across the offshore fleet because it simply keeps working. The rugged stainless and aluminum body resists corrosion, the polished finish stays good-looking for years, and the mount is engineered to handle the torque and whip of long outrigger poles at trolling speed.
Locks Solid, No Slop
The outward rotation handle has detents every 22.5°, locking the arm firmly in place so the poles don't wander or rattle. TACO's spline-lock head gives you secure height positioning with a positive lock and minimal moving parts, so your spread stays exactly where you set it.
Operate It From Under the Top
Swing the poles through a full 180° and adjust them horizontally from under the T-top or hardtop. The ergonomic rotator lever uses polished stainless steel and UV-resistant, non-slip Santoprene for a sure grip with wet hands.
Hardtop or Soft Top
The GS-280 installs on hardtops up to 2-1/2" thick and on soft-top frames using TACO's outrigger-ready and clamp-on mounting plates. It fits the industry-standard TACO Outrigger-Ready Mounting Plate on a 4" x 6" base.
Pole Compatibility
Designed for TACO's 1-1/2" Tele-Outrigger poles, including the 18' Deluxe Aluminum and Carbon Fiber series. You can also run 1-1/8" poles by adding the GSC-0025 Outrigger Base Reducer.
Installation Notes
- Requires a 3-1/8" hole through the top for the base; locate its center at least 9-1/2" in from the hardtop edge
- Allow about 8" of handle clearance from the center of the hole to rotate the outrigger 90°
- Install with the upward rotation knob facing outboard on each side
- Basic tools: drill with 5/16" bit, 3/16" Allen wrench and 1/2" wrench; fastener length may vary with top thickness
- A backing plate is recommended for hardtop installs; use wedge plates if your top is arched
Recommended Add-Ons (Sold Separately)
- TACO Grand Slam Backing Plates (BP-150BSY-320-1) for extra strength under the hardtop
- TACO Wedge Plates (WP-150WHA-1) to keep the mounts upright on an arched top
- TACO Outrigger Base Reducer (GSC-0025-1) to run 1-1/8" poles
- TACO 1-1/2" Tele-Outrigger Poles and a TACO Premium Rigging Kit
What’s Included
- 2 x Grand Slam 280 outrigger mounts (port and starboard)
- 2 x rotator handles
- Stainless and nylon washers, vinyl tubing spacers and hex bolts
| Brand | TACO Marine |
| Part Number | GS-280 |
| Quantity | Pair (Port & Starboard) |
| Mount Type | Top Mount, Hardtop or Soft Top |
| Pole Diameter | 1-1/2" (1-1/8" With GSC-0025 Reducer) |
| Boat Size | 20' to 36' |
| Arm Swing | 180° |
| Locking Positions | 12, Rotation Detents Every 22.5° |
| Max Hardtop Thickness | 2-1/2" |
| Base | 4" x 6" |
| Construction | Cast 316L Stainless Steel, Machined Anodized Aluminum |
| Weight | 28.26 lb per Pair |
| UPC | 630838082703 |
| Warranty | 3-Year Limited |
| Brand | TACO Marine |
| Part Number | GS-280 |
| Quantity | Pair (Port & Starboard) |
| Mount Type | Top Mount, Hardtop or Soft Top |
| Pole Diameter | 1-1/2" (1-1/8" With GSC-0025 Reducer) |
| Boat Size | 20' to 36' |
| Arm Swing | 180° |
| Locking Positions | 12, Rotation Detents Every 22.5° |
| Max Hardtop Thickness | 2-1/2" |
| Base | 4" x 6" |
| Construction | Cast 316L Stainless Steel, Machined Anodized Aluminum |
| Weight | 28.26 lb per Pair |
| UPC | 630838082703 |
| Warranty | 3-Year Limited |