Victron Energy Lithium NG 51.2V 100Ah LiFePO4 Battery, 5.12 kWh, UL 2054
- 100 Ah / 5,120 Wh
- 100 A continuous discharge
- IP65, cell-level monitoring
- Up to 5,000 cycles
- Capacity 100 Ah / 5,120 Wh
- Voltage 51.2 V (48V Systems)
- Discharge 100 A Continuous / 200 A Pulse
- Cycle Life Up to 5,000 Cycles
The Victron Energy Lithium NG 51.2V 100Ah LiFePO4 Battery is a next-generation lithium iron phosphate battery for 48V house banks on boats, RVs, off-grid homes and backup systems. It stores 5.12 kWh in a rugged IP65 enclosure, delivers 100 A continuous and 200 A pulse discharge, and reports cell-level voltage and temperature to your Victron system for complete visibility.
- Capacity: 100 Ah / 5,120 Wh
- Voltage: 51.2 V (48V Systems)
- Discharge: 100 A Continuous / 200 A Pulse
- Cycle Life: Up to 5,000 Cycles
LiFePO4 Chemistry
Lithium iron phosphate is the safest mainstream lithium chemistry. The NG battery delivers far more usable energy than lead-acid at a fraction of the weight. It holds a flat 51.2 V nominal voltage through most of the discharge, charges faster, and sits happily at partial state of charge without sulfation.
Long Cycle Life
Victron rates the Lithium NG for 2,500 cycles at 80% depth of discharge, 3,000 cycles at 70% and 5,000 cycles at 50%. That is many years of daily cycling, even in hard-working liveaboard and off-grid systems.
Cell-Level Monitoring
Building on Victron’s Lithium Smart series, the NG reports the voltage and temperature of each individual cell to the BMS. That data flows to VictronConnect, a GX device and the VRM Portal, which makes performance tracking and troubleshooting far easier.
Integrated Current Shunt
A current shunt built into the battery measures current flowing in and out for accurate state-of-charge reporting, with no separate battery monitor needed for the bank.
Requires a Victron BMS NG
Like all Victron Lithium Smart and NG batteries, the NG battery must be used with a compatible Victron NG battery management system, such as the Lynx Smart BMS NG. The BMS protects the cells by stopping charge or discharge when needed, and it also handles automatic setup and firmware updates for the batteries.
Scalable Battery Banks
Lithium NG batteries can be connected in series, in parallel or in series-parallel to build the voltage and capacity you need. Up to 50 batteries can be used in one system.
IP65 Enclosure and Bracket Mounting
The sealed IP65 housing stands up to dust and water spray, and integrated mounting rails with brackets make secure installation simple in vehicles and on boats. Mount the battery upright or on its side, but never with the terminals facing down.
Low Self-Discharge
Victron rates self-discharge at 3% or less per month at 25°C, so the bank holds its charge through the off-season or between trips.
What’s Included
- 1 × Victron Lithium NG 51.2V/100Ah battery (BAT548110620)
Buying and Setup Notes
Plan this component as part of a complete, correctly protected electrical system. Confirm nominal voltage, charge limits and the precise battery-management requirements of this Victron series; not all Victron lithium families use the same BMS architecture. High-current DC and mains-voltage work should be designed and installed by qualified personnel using the official installation manual.
| Brand | Victron Energy |
| Model | LiFePO4 Battery 51.2V/100Ah NG |
| Part Number | BAT548110620 |
| Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Nominal Voltage | 51.2 V |
| Nominal Capacity @ 25°C | 100 Ah |
| Nominal Energy @ 25°C | 5,120 Wh |
| Max Continuous Discharge Current | 100 A |
| Max Pulse Discharge Current (10 s) | 200 A |
| Max Continuous Charge Current | 100 A |
| Max Pulse Charge Current (10 s) | 200 A |
| Charge Voltage | 56–56.8 V |
| Float Voltage | 54 V |
| End of Discharge Voltage | 44.8 V |
| Cycle Life | 2,500 @ 80% DoD / 3,000 @ 70% DoD / 5,000 @ 50% DoD |
| Self-Discharge | ≤ 3% per Month @ 25°C |
| BMS | Victron NG BMS Required (e.g. Lynx Smart BMS NG) |
| Max Batteries per System | 50 |
| Ingress Protection | IP65 |
| Power Connection | M8 Threaded Inserts |
| Dimensions (H × W × D) | 235 × 648 × 162 mm (9.3 × 25.5 × 6.4”) |
| Weight | 37 kg (81.6 lb) |
| Certification | UL 2054 |
| UPC / EAN | 8719076064756 |
| Warranty | 5 Years |
| Brand | Victron Energy |
| Model | LiFePO4 Battery 51.2V/100Ah NG |
| Part Number | BAT548110620 |
| Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Nominal Voltage | 51.2 V |
| Nominal Capacity @ 25°C | 100 Ah |
| Nominal Energy @ 25°C | 5,120 Wh |
| Max Continuous Discharge Current | 100 A |
| Max Pulse Discharge Current (10 s) | 200 A |
| Max Continuous Charge Current | 100 A |
| Max Pulse Charge Current (10 s) | 200 A |
| Charge Voltage | 56–56.8 V |
| Float Voltage | 54 V |
| End of Discharge Voltage | 44.8 V |
| Cycle Life | 2,500 @ 80% DoD / 3,000 @ 70% DoD / 5,000 @ 50% DoD |
| Self-Discharge | ≤ 3% per Month @ 25°C |
| BMS | Victron NG BMS Required (e.g. Lynx Smart BMS NG) |
| Max Batteries per System | 50 |
| Ingress Protection | IP65 |
| Power Connection | M8 Threaded Inserts |
| Dimensions (H × W × D) | 235 × 648 × 162 mm (9.3 × 25.5 × 6.4”) |
| Weight | 37 kg (81.6 lb) |
| Certification | UL 2054 |
| UPC / EAN | 8719076064756 |
| Warranty | 5 Years |