Victron Energy Quattro 24/5000/120-100/100 120V Inverter/Charger, 5kVA, 120A, Dual AC Inputs, UL 458
- 5,000 VA pure sine inverter
- 120 A adaptive charger
- Dual AC inputs, 100 A each
- 24V DC battery, 120V AC
- Inverter 5,000 VA Pure Sine Wave
- Charger 120 A Adaptive
- AC Inputs 2 x 100 A with Transfer Switch
- Battery 24V DC
The Victron Energy Quattro 24/5000/120-100/100 120V Inverter/Charger combines a 5,000 VA pure sine wave inverter, a 120 A adaptive battery charger and two AC inputs with an integrated automatic transfer switch, all in one unit for 24V battery systems. Connect shore power and a generator (or the grid and a generator), and the Quattro automatically selects the active source and keeps your loads powered without interruption. This version is listed to UL 458, the safety standard for power converters and inverters used in RVs, boats and other mobile applications in North America.
- Inverter: 5,000 VA Pure Sine Wave
- Charger: 120 A Adaptive
- AC Inputs: 2 × 100 A with Transfer Switch
- Battery: 24V DC
Two AC Inputs with Integrated Transfer Switch
The Quattro accepts two independent AC sources, such as shore power and a generator, and automatically connects to whichever one is live. Each input passes through up to 100 A, so a single unit can manage the entire AC system.
Uninterrupted AC Power
The main output has no-break functionality. If shore power or the generator drops out, the Quattro takes over the connected loads so quickly that computers, electronics and other sensitive equipment keep running.
Two AC Outputs
A main output for critical loads is always powered, by the inverter or the AC source. A second output carries non-essential loads, such as water heaters, and is live only when AC input power is available, so they never drain your batteries.
PowerControl and PowerAssist
PowerControl lets you set a maximum shore or generator current so the Quattro reduces its charging to avoid tripping a dock breaker. PowerAssist goes further: when demand peaks, the Quattro adds battery power to the shore or generator supply, letting a small generator or shore connection run bigger loads.
120 A Adaptive Four-Stage Charger
The adaptive charger adjusts its absorption time to how deeply the battery was discharged, with default absorption of 28.8 V, float of 27.6 V and a reduced storage mode of 26.4 V to protect batteries left on charge. It works with lead-acid, AGM, gel and lithium batteries, including Victron Lithium NG and Smart batteries with a compatible BMS.
Parallel and Multi-Phase Systems
Multiple Quattros can be connected in parallel for more power, or configured for split-phase and three-phase systems, all coordinated over VE.Bus.
Complete System Monitoring
Connect a Victron GX device on VE.Bus to monitor and control the Quattro locally and remotely through the VRM Portal. Programmable relays can be set for alarms, low battery or generator start.
Built Tough
The blue aluminum enclosure houses a robust low-frequency transformer design built for continuous duty on boats, in vehicles and in off-grid installations.
What’s Included
- 1 × Victron Quattro 24/5000/120-100/100 120V inverter/charger (QUA242503112)
Buying and Setup Notes
Plan this component as part of a complete, correctly protected electrical system. Check AC voltage and frequency, battery-bank voltage, current ratings, transfer-switch limits and system earthing before installation. High-current DC and mains-voltage work should be designed and installed by qualified personnel using the official installation manual.
| Brand | Victron Energy |
| Model | Quattro 24/5000/120-100/100 120V VE.Bus |
| Part Number | QUA242503112 |
| Nominal Battery Voltage | 24 V |
| DC Input Voltage Range | 19–33 V |
| Output | 120 VAC ± 2%, 60 Hz, Pure Sine Wave |
| Continuous Output @ 25°C | 5,000 VA / 4,000 W |
| Continuous Output @ 40°C | 3,700 W |
| Continuous Output @ 65°C | 3,000 W |
| Peak Power | 10,000 W |
| Maximum Efficiency | 94% |
| AC Inputs | 2, 90–140 VAC, 45–65 Hz |
| Transfer Switch / Max Feed-Through | 2 × 100 A |
| Battery Charge Current | 120 A |
| Charge Voltages (Absorption / Float / Storage) | 28.8 V / 27.6 V / 26.4 V |
| PowerControl / PowerAssist | Yes |
| Parallel & Multi-Phase | Yes, via VE.Bus |
| Communication | VE.Bus |
| Enclosure | Aluminum, Blue RAL 5012, IP21 |
| Battery Connection | Four M8 Bolts (2 Positive, 2 Negative) |
| Weight | 30 kg (66.1 lb) |
| Certification | UL 458 |
| UPC / EAN | 8719076079781 |
| Warranty | 5 Years |
| Brand | Victron Energy |
| Model | Quattro 24/5000/120-100/100 120V VE.Bus |
| Part Number | QUA242503112 |
| Nominal Battery Voltage | 24 V |
| DC Input Voltage Range | 19–33 V |
| Output | 120 VAC ± 2%, 60 Hz, Pure Sine Wave |
| Continuous Output @ 25°C | 5,000 VA / 4,000 W |
| Continuous Output @ 40°C | 3,700 W |
| Continuous Output @ 65°C | 3,000 W |
| Peak Power | 10,000 W |
| Maximum Efficiency | 94% |
| AC Inputs | 2, 90–140 VAC, 45–65 Hz |
| Transfer Switch / Max Feed-Through | 2 × 100 A |
| Battery Charge Current | 120 A |
| Charge Voltages (Absorption / Float / Storage) | 28.8 V / 27.6 V / 26.4 V |
| PowerControl / PowerAssist | Yes |
| Parallel & Multi-Phase | Yes, via VE.Bus |
| Communication | VE.Bus |
| Enclosure | Aluminum, Blue RAL 5012, IP21 |
| Battery Connection | Four M8 Bolts (2 Positive, 2 Negative) |
| Weight | 30 kg (66.1 lb) |
| Certification | UL 458 |
| UPC / EAN | 8719076079781 |
| Warranty | 5 Years |