Xantrex 12V 240Ah LiFePO4 Lithium Battery with Bluetooth & BMS
- 240Ah, 3,072Wh capacity
- Up to 6,000 cycles
- Internal BMS with Bluetooth
- Heavy-duty metal enclosure
- Capacity 240Ah, 3,072Wh
- Chemistry LiFePO4
- Discharge 150A Continuous
- Warranty 10-Year Prorated
Build a more capable 12V house battery bank for extended time away from shore power. The Xantrex 240Ah LiFePO4 battery combines 3,072Wh of nominal storage with built-in battery management, Bluetooth monitoring and a rugged metal enclosure. It is designed for energy storage in boats, RVs and mobile power systems where battery capacity, charging performance and cycle life matter. Onboard indicators let you check charge status at the battery, while the app provides additional visibility into operating conditions.
- Capacity: 240Ah, 12.8V Nominal, 3,072Wh
- Chemistry: LiFePO4 with UL1973 Certified Cells
- Discharge: 150A Continuous, 300A Pulse (3 s)
- Monitoring: Internal BMS, LEDs and Bluetooth App
Size the Battery Bank for Your Actual Loads
Capacity in amp-hours describes stored energy, not the maximum power the battery can deliver at once. This model is rated for 150A continuous discharge; an inverter demanding more current requires a suitably engineered battery bank. Usable AC energy will be lower than the nominal 3,072Wh because of conversion losses, operating limits and reserve capacity.
Plan a Complete Lithium Upgrade
Check compatibility with your shore charger, alternator charging system, solar controller and inverter before replacing lead-acid batteries. Use the correct lithium charging profile and observe the battery's charge-temperature limits. An integrated BMS does not replace external circuit protection.
More Power in Less Space
With 240Ah at 12.8V nominal, one battery provides about 3,072Wh of energy and can replace several lead-acid batteries at a fraction of the weight, freeing up space and payload.
Long Cycle Life
LiFePO4 chemistry is rated for up to 6,000 cycles, compared with roughly 400-500 for typical lead-acid or AGM batteries, with actual service life depending on depth of discharge, temperature and operating conditions.
Internal BMS with Cell Balancing
The built-in battery management system protects the battery, balances the cells to extend life and monitors state of charge, voltage, current and temperature, with redundant safety features.
Bluetooth and Onboard Monitoring
State-of-charge LEDs and an on/off button are on the battery, and the Xantrex app shows status and faults over Bluetooth. A remote port allows remote on/off and fault signalling.
Built for Mobile Use
A heavy-duty metal enclosure, two metal handles and M8 x 1.25 terminals suit marine and vehicle installations. The battery mounts standing or on its side, and an optional heating blanket is available for installations outside the heated cabin.
Charging Guidance
Charge at 14.6V with a recommended float of 13.6V. Recommended charge current is 100A or less (150A maximum), and charging is allowed from 32°F to 131°F. Discharge cut-off is 10V.
Installation Considerations
Follow the current model-specific Xantrex installation manual and applicable marine electrical standards. Confirm mounting location, ventilation, environmental limits, conductor sizing, overcurrent protection and grounding requirements with a qualified marine electrical installer. Accessories are sold separately unless identified in the included components below.
What’s Included
- Xantrex 12V 240Ah lithium-ion battery
- 2 x M8 x 1.25 terminal bolts with lock washers and captive washers
- Quick start guide
| Brand | Xantrex |
| Model | 883-0240-12 |
| Type | Lithium Iron Phosphate (LiFePO4) Battery |
| Battery Voltage | 12V (12.8V Nominal) |
| Capacity | 240Ah |
| Energy | 3,072Wh |
| Internal Impedance | Under 4 mΩ |
| Charge Voltage | 14.6V |
| Recommended Float Voltage | 13.6V |
| Charge Current | 100A or Less Recommended, 150A Max |
| Continuous Discharge | 150A (100A or Less Recommended) |
| Pulse Discharge | 300A for 3 Seconds |
| Discharge Cut-Off | 10V |
| Cycle Life | Up to 6,000 Cycles |
| BMS | Internal, with Cell Balancing |
| Monitoring | SOC LEDs, Bluetooth App, Remote On/Off and Fault Port |
| Charging Temperature | 32°F to 131°F |
| Discharging Temperature | -4°F to 131°F |
| Terminals | M8 x 1.25 |
| Handles | Two Metal Handles |
| Enclosure | Heavy-Duty Metal |
| Mounting | Standing or on Its Side |
| Dimensions | 19.7 x 7.1 x 10.3 in |
| Weight | 69.4 lb |
| Certification | UN/DOT 38.3, UL1973 Certified Cells |
| UPC | 715535913830 |
| Warranty | 10-Year Prorated (Years 0-3 Full Replacement) |
| Brand | Xantrex |
| Model | 883-0240-12 |
| Type | Lithium Iron Phosphate (LiFePO4) Battery |
| Battery Voltage | 12V (12.8V Nominal) |
| Capacity | 240Ah |
| Energy | 3,072Wh |
| Internal Impedance | Under 4 mΩ |
| Charge Voltage | 14.6V |
| Recommended Float Voltage | 13.6V |
| Charge Current | 100A or Less Recommended, 150A Max |
| Continuous Discharge | 150A (100A or Less Recommended) |
| Pulse Discharge | 300A for 3 Seconds |
| Discharge Cut-Off | 10V |
| Cycle Life | Up to 6,000 Cycles |
| BMS | Internal, with Cell Balancing |
| Monitoring | SOC LEDs, Bluetooth App, Remote On/Off and Fault Port |
| Charging Temperature | 32°F to 131°F |
| Discharging Temperature | -4°F to 131°F |
| Terminals | M8 x 1.25 |
| Handles | Two Metal Handles |
| Enclosure | Heavy-Duty Metal |
| Mounting | Standing or on Its Side |
| Dimensions | 19.7 x 7.1 x 10.3 in |
| Weight | 69.4 lb |
| Certification | UN/DOT 38.3, UL1973 Certified Cells |
| UPC | 715535913830 |
| Warranty | 10-Year Prorated (Years 0-3 Full Replacement) |