Xantrex Freedom SW 12V True Sine Wave Inverter/Charger, 2000W or 3000W
- 3000W true sine wave power
- Up to 150A battery charger
- Stackable, Xanbus enabled
- Battery temp sensor included
- Inverter 2000W or 3000W
- Charger 100A or 150A
- Transfer Under 20 ms
- Warranty 2-Year Limited
Designed for substantial onboard electrical systems, the Xantrex Freedom SW combines true sine wave AC generation, high-current battery charging and automatic AC transfer in a single networkable inverter/charger. Choose the SW2012 for 2000W continuous output and 100A charging, or the SW3012 for 3000W and 150A charging. Xanbus integration, generator support and compatible stacking configurations make this series particularly relevant to larger boats and engineered off-grid installations that need more than a basic standalone inverter.
- Inverter: 2000W or 3000W True Sine Wave, 200% Surge for 5 Seconds
- Charger: 100A or 150A, LiFePO4, Flooded, Gel, AGM
- Transfer: Under 20 ms, 30A Relay
- System: Xanbus Enabled, Stackable
Choose the Right System Architecture
The SW2012 and SW3012 differ in both inverter capacity and AC connection arrangements. Select the model according to your existing shore-power and distribution system, not wattage alone. A split-phase input arrangement does not mean a single unit supplies 240V from its battery bank; follow Xantrex's approved stacking configurations where split-phase inverter output is required.
Designed for Integrated Power Management
For installations using a generator or multiple inverter/chargers, plan compatible system controls, networking components and AC source limits before purchase. Verify which accessories are required for lithium charging, marine installation and stacking.
Power for Big Loads
True sine wave output at 120V, 60 Hz with up to 94% efficiency runs air conditioners, galley appliances, water heaters and entertainment systems. A 200% surge for 5 seconds (4000W or 6000W) starts heavy motor loads.
High-Output Charger
The charger delivers 100A (SW2012) or 150A (SW3012) with a power factor of 0.98, charges LiFePO4 lithium, flooded, gel and AGM batteries, includes a manual equalize function, and can begin charging a deeply discharged battery from above 5V. The included remote battery temperature sensor adjusts charging for battery temperature. LiFePO4 charging uses the custom battery mode, which requires the optional System Control Panel.
Fast, Seamless Transfer
The transfer relay switches between inverter and shore or generator power in under 20 ms, although continuity depends on the connected equipment. The SW2012 has one 30A leg; the SW3012 has two 30A legs with split-phase AC input and dual outputs.
Generator Support
Generator support mode lets the inverter supplement a small generator or limited shore power from the batteries when loads exceed the AC source.
Stackable and Networked
Connect two units in parallel to double inverter output, or connect two SW3012 units in series for 120/240V split-phase power using the series stacking cable (808-9005). Xanbus networking works with the System Control Panel (809-0921), Automatic Generator Start (809-0915) and ComBox for data logging and control.
Marine Approvals
ETL listed to CSA 107.1, UL458 and the UL458 Marine Supplement (with drip shield 808-9004), and meets ABYC E-11, A-31 and A-32.
Choose Your Model
- SW2012 (815-2012): 2000W continuous, 4000W surge, 100A charger, single-phase AC in and out
- SW3012 (815-3012): 3000W continuous, 6000W surge, 150A charger, split-phase AC in with dual outputs
Installation Considerations
Follow the current model-specific Xantrex installation manual and applicable marine electrical standards. Confirm mounting location, ventilation, environmental limits, conductor sizing, overcurrent protection and grounding requirements with a qualified marine electrical installer. Accessories are sold separately unless identified in the included components below.
What’s Included
- Freedom SW inverter/charger (model per selection)
- Remote battery temperature sensor
- Owner's guide
| Brand | Xantrex |
| Model | 815-2012 (SW2012), 815-3012 (SW3012) |
| Type | True Sine Wave Inverter/Charger |
| DC Nominal Voltage | 12V |
| Continuous Output (40°C) | 2000W / 3000W |
| Surge (5 s) | 4000W / 6000W |
| Peak Output Current | 50A / 75A |
| AC Output | 120V AC, 60 ±0.2 Hz |
| Optimal Efficiency | 94% |
| No-Load Draw (Inverting) | Under 1.5A DC |
| DC Input Range | 10-16 VDC |
| AC Connections | SW2012: Single Phase In/Out, SW3012: Split Phase In, Dual Out |
| Charger Output | 100A / 150A |
| Charger Output Voltage Range | 5-16 VDC |
| Charge Control | Multi-Stage with Manual Equalize |
| Charger Efficiency | Over 85% |
| AC Input | 120V AC (85-140 VAC) |
| AC Input Current at Max Charge | 16A / 24A |
| Power Factor | 0.98 Typical |
| Dead Battery Charge | From Above 5V |
| Battery Types | LiFePO4, Flooded, Gel, AGM |
| Temperature Compensation | Remote Battery Temperature Sensor (Included) |
| Transfer Relay | SW2012: 1 x 30A, SW3012: 2 x 30A |
| Transfer Time | Under 20 ms |
| Operating Temperature | -4°F to 140°F |
| Storage Temperature | -40°F to 185°F |
| Dimensions (L x W x H) | 7.75 x 13.5 x 15.25 in |
| Weight | 60.5 lb |
| Safety | ETL Listed to CSA 107.1, UL458, UL458 Marine Supplement (with Drip Shield 808-9004), ABYC E-11, A-31, A-32 |
| EMC | FCC Part 15 Class B, ICES-3(B) |
| Optional Accessories | System Control Panel 809-0921, Remote Panel 808-9002, AGS 809-0915, GFCI 808-9003, Series Stacking Cable 808-9005 |
| Warranty | 2-Year Limited |
| Brand | Xantrex |
| Model | 815-2012 (SW2012), 815-3012 (SW3012) |
| Type | True Sine Wave Inverter/Charger |
| DC Nominal Voltage | 12V |
| Continuous Output (40°C) | 2000W / 3000W |
| Surge (5 s) | 4000W / 6000W |
| Peak Output Current | 50A / 75A |
| AC Output | 120V AC, 60 ±0.2 Hz |
| Optimal Efficiency | 94% |
| No-Load Draw (Inverting) | Under 1.5A DC |
| DC Input Range | 10-16 VDC |
| AC Connections | SW2012: Single Phase In/Out, SW3012: Split Phase In, Dual Out |
| Charger Output | 100A / 150A |
| Charger Output Voltage Range | 5-16 VDC |
| Charge Control | Multi-Stage with Manual Equalize |
| Charger Efficiency | Over 85% |
| AC Input | 120V AC (85-140 VAC) |
| AC Input Current at Max Charge | 16A / 24A |
| Power Factor | 0.98 Typical |
| Dead Battery Charge | From Above 5V |
| Battery Types | LiFePO4, Flooded, Gel, AGM |
| Temperature Compensation | Remote Battery Temperature Sensor (Included) |
| Transfer Relay | SW2012: 1 x 30A, SW3012: 2 x 30A |
| Transfer Time | Under 20 ms |
| Operating Temperature | -4°F to 140°F |
| Storage Temperature | -40°F to 185°F |
| Dimensions (L x W x H) | 7.75 x 13.5 x 15.25 in |
| Weight | 60.5 lb |
| Safety | ETL Listed to CSA 107.1, UL458, UL458 Marine Supplement (with Drip Shield 808-9004), ABYC E-11, A-31, A-32 |
| EMC | FCC Part 15 Class B, ICES-3(B) |
| Optional Accessories | System Control Panel 809-0921, Remote Panel 808-9002, AGS 809-0915, GFCI 808-9003, Series Stacking Cable 808-9005 |
| Warranty | 2-Year Limited |