Xantrex Freedom XC PRO 12V True Sine Wave Inverter/Charger, 2000W or 3000W
- True sine wave 120V AC
- Up to 150A lithium-ready charger
- Charges batteries from 0V
- RV-C, NMEA 2000, J1939 built in
- Inverter 2000W or 3000W
- Charger 100A or 150A
- Input 12V DC
- Warranty 2-Year Limited
Upgrade a 12V electrical system with the Xantrex Freedom XC PRO, an integrated true sine wave inverter, high-output battery charger and automatic AC transfer relay. It is designed for boats, RVs and mobile systems requiring substantial AC power in a compact package, with network connectivity for compatible third-party monitoring. Choose 2000W output with 100A charging or 3000W output with 150A charging. Both versions offer adjustable charging current and five-second surge capacity to help accommodate compatible motor-driven equipment.
- Inverter: 2000W or 3000W True Sine Wave, 2X Surge for 5 Seconds
- Charger: 100A or 150A, User Selectable from 5A
- Batteries: Lithium-Ion Ready, Charges from 0V
- Network: Built-In RV-C, NMEA 2000 and J1939 Card
XC PRO or XC PRO Marine?
The standard XC PRO offers communications support for RV-C, NMEA 2000 and J1939 integrations. For a vessel where a dedicated Micro-C NMEA 2000 connection is a priority, compare the separate XC PRO Marine models. Verify communication accessories and display compatibility for your particular installation.
Higher Output Requires a Larger DC System
The 2000W and 3000W models have listed full-load DC draws of 192A and 304A respectively. Select your battery bank, battery management system, cables and protection to meet the actual continuous and startup loads. Adjust charger current to the battery manufacturer's limits and available AC supply.
True Sine Wave Power
The inverter produces true sine wave AC at 120V (selectable 110V or 108V), 60 Hz or 50 Hz, so it runs induction cooktops, microwaves, TVs, chargers and other sensitive electronics just as they would on shore power. Peak efficiency is 91%.
Extended Surge for Motor Loads
A surge rating of twice continuous power for up to 5 seconds (4000W on the 2000 model, 6000W on the 3000 model) helps start compressors, pumps and other motor loads that draw a high current at start-up.
High-Output Battery Charger
The charger delivers up to 100A or 150A, adjustable from 5A to suit smaller battery banks. It can begin charging from 0 VDC to recover deeply discharged batteries, supports lithium-ion batteries, and offers a custom battery type with output up to 18 VDC. Power factor is above 98% at full charge rate.
Automatic Transfer Relay
When shore or generator power is present, the transfer relay passes AC through to your loads (30A surge / 24A continuous on the 2000 model, 50A surge / 40A continuous on the 3000 model) while the charger recharges your batteries. A programmable AC under-voltage setting helps protect loads on weak shore power.
Network Connectivity
A built-in communications card integrates the XC PRO with third-party monitoring and control displays using RV-C, NMEA 2000 or J1939, and a USB port allows firmware updates and OEM configuration.
Bluetooth Monitoring
Add the optional Freedom X Bluetooth Remote Panel (808-0817-02) to monitor and configure the unit from the Xantrex app on iOS and Android, or use the wired remote panel with 25 ft cable (808-0817-01).
Marine and RV Approvals
The XC PRO is ETL listed to CSA 107.1, UL458 and the UL458 Marine Supplement (with the 808-1050 drip shield), and meets ABYC E-11, A-31 and A-32.
Choose Your Model
- 2000W - 100A charger (818-2010): 4000W surge, 192A DC draw at full load, 17.1 lb
- 3000W - 150A charger (818-3010): 6000W surge, 304A DC draw at full load, 18.6 lb
Installation Considerations
Follow the current model-specific Xantrex installation manual and applicable marine electrical standards. Confirm mounting location, ventilation, environmental limits, conductor sizing, overcurrent protection and grounding requirements with a qualified marine electrical installer. Accessories are sold separately unless identified in the included components below.
What’s Included
- Freedom XC PRO inverter/charger (model per selection)
- DC ground lug
- Cable bushings
- 2 AC knockout plugs
- Owner's guide
| Brand | Xantrex |
| Model | 818-2010 (2000W), 818-3010 (3000W) |
| Type | True Sine Wave Inverter/Charger with Transfer Relay |
| DC Nominal Voltage | 12V |
| Continuous Output (40°C) | 2000W / 3000W |
| Continuous AC Current | 16.7A / 25A |
| Surge Power (5 s) | 4000W / 6000W |
| AC Output Voltage | 120V, 110V or 108V |
| Frequency | 60 Hz (Configurable to 50 Hz) |
| Peak Efficiency | 91% |
| Full-Load Efficiency | 86% or Higher / 84% or Higher |
| DC Input Operating Range | 10.1-18.0 VDC |
| DC Max Non-Operating Voltage | 25.2 VDC |
| DC Current at Full Load | 192A / 304A |
| Charger Output | 100A / 150A Max |
| Selectable Charge Current | 5-100A / 5-150A |
| Minimum Battery Voltage to Charge | 0 VDC |
| Max DC Output Voltage | 18.0 VDC (Custom Battery Type) |
| Max AC Input Current | 24A / 25A |
| AC Pass-Through Range | 85-140 VAC |
| Power Factor | Over 98% at Full Charge Rate |
| Transfer Relay | 30A Surge, 24A Continuous / 50A Surge, 40A Continuous |
| Communications | RV-C, NMEA 2000, J1939, USB |
| Operating Temperature | -4°F to 140°F, Derated Above 104°F |
| Storage Temperature | -40°F to 158°F |
| Humidity | 5-95% RH Non-Condensing |
| Dimensions | 15.4 x 10.8 x 4.9 in (16.0 x 12.0 x 4.9 in with Flanges) |
| Weight | 17.1 lb / 18.6 lb |
| Safety | ETL Listed to CSA 107.1, UL458, UL458 Marine Supplement (with Drip Shield 808-1050), ABYC E-11, A-31, A-32 |
| EMC | FCC Part 15 Class B, ICES-3(B) |
| Optional Accessories | Bluetooth Remote 808-0817-02, Remote Panel 808-0817-01, GFCI 808-9817 |
| UPC | 818-2010: 715535903121 / 818-3010: 715535905767 |
| Warranty | 2-Year Limited |
| Brand | Xantrex |
| Model | 818-2010 (2000W), 818-3010 (3000W) |
| Type | True Sine Wave Inverter/Charger with Transfer Relay |
| DC Nominal Voltage | 12V |
| Continuous Output (40°C) | 2000W / 3000W |
| Continuous AC Current | 16.7A / 25A |
| Surge Power (5 s) | 4000W / 6000W |
| AC Output Voltage | 120V, 110V or 108V |
| Frequency | 60 Hz (Configurable to 50 Hz) |
| Peak Efficiency | 91% |
| Full-Load Efficiency | 86% or Higher / 84% or Higher |
| DC Input Operating Range | 10.1-18.0 VDC |
| DC Max Non-Operating Voltage | 25.2 VDC |
| DC Current at Full Load | 192A / 304A |
| Charger Output | 100A / 150A Max |
| Selectable Charge Current | 5-100A / 5-150A |
| Minimum Battery Voltage to Charge | 0 VDC |
| Max DC Output Voltage | 18.0 VDC (Custom Battery Type) |
| Max AC Input Current | 24A / 25A |
| AC Pass-Through Range | 85-140 VAC |
| Power Factor | Over 98% at Full Charge Rate |
| Transfer Relay | 30A Surge, 24A Continuous / 50A Surge, 40A Continuous |
| Communications | RV-C, NMEA 2000, J1939, USB |
| Operating Temperature | -4°F to 140°F, Derated Above 104°F |
| Storage Temperature | -40°F to 158°F |
| Humidity | 5-95% RH Non-Condensing |
| Dimensions | 15.4 x 10.8 x 4.9 in (16.0 x 12.0 x 4.9 in with Flanges) |
| Weight | 17.1 lb / 18.6 lb |
| Safety | ETL Listed to CSA 107.1, UL458, UL458 Marine Supplement (with Drip Shield 808-1050), ABYC E-11, A-31, A-32 |
| EMC | FCC Part 15 Class B, ICES-3(B) |
| Optional Accessories | Bluetooth Remote 808-0817-02, Remote Panel 808-0817-01, GFCI 808-9817 |
| UPC | 818-2010: 715535903121 / 818-3010: 715535905767 |
| Warranty | 2-Year Limited |