Xantrex TRUEcharge3 12V Marine Battery Charger, 3-Bank, 40A or 60A
- Three charging outputs
- Lithium-ion compatible
- 90-265V universal input
- Parallel stack two chargers
- Output 12V 40A or 60A
- Banks 3
- Batteries Lithium, AGM, Gel
- Warranty 5-Year Limited
Recharge your boat's 12V battery system from shore power with one dedicated, multi-output charger. The Xantrex TRUEcharge3 combines automatic three-stage charging, selectable battery chemistry settings and three battery outputs in a compact onboard unit. Available in 40A and 60A versions, it is suited to boats with separate starting, house or accessory banks and installations where shore-power capacity and charging time matter. Its wide AC input range also supports compatible generator supplies.
- Output: 12V, 40A or 60A
- Banks: 3 Outputs
- Batteries: Lithium-Ion, Gel, Flooded, AGM
- Input: 90-265V AC, 47-63 Hz, PFC
40A or 60A: Which Charger Fits?
Choose based on battery-bank capacity, the battery manufacturer's permitted charge current, available AC supply and typical time at the dock. The higher-output 60A model can replenish a suitable larger bank faster, but is not automatically the best choice for every installation. The rated current is shared across the outputs, not available independently at each output.
Battery Compatibility Matters
Confirm that the selected charging profile is suitable for every connected bank. Do not assume different chemistries can be charged simultaneously with independent profiles. Use equalization only where expressly permitted by the battery manufacturer.
Automatic 3-Stage Charging
Bulk, absorption and float stages recharge batteries quickly and then hold them at a safe float voltage, so the charger can stay connected at the dock or in storage. Charge voltage ranges from 14.2V to 15.5V and float from 13.4V to 13.8V depending on settings, with a 16V equalize function for flooded batteries.
Charges Lithium and Lead-Acid
Selectable settings cover gel, flooded, AGM and lithium-ion (LiFePO4) batteries, so the TRUEcharge3 works with your current batteries and after a lithium upgrade. Three temperature compensation settings help match charging to conditions.
Three Battery Outputs
Three positive outputs and a common negative charge up to three batteries or banks from one charger.
Universal, Power Factor Corrected Input
Accepts 90-265V AC at 47-63 Hz (120, 230 and 240V nominal). Power factor correction reduces the current drawn from shore power and generators. Below about 104V AC, output is reduced to 80% of full current.
Stack for More Power
Two TRUEcharge3 chargers can be connected in parallel for higher charging current when used with the TRUEcharge3 Remote Panel (808-8040-10).
Quiet Mode and Protection
Quiet Mode turns off the fan and reduces output, then returns to normal after 9 hours, which is handy overnight. Built-in protection includes reverse polarity, DC over-voltage and over-temperature, plus circuit breaker protection.
Choose Your Model
- 40A (804-1240-10): 2.8 x 6.7 x 9.8 in, 4.8 lb, recommended minimum bank 80Ah
- 60A (804-1260-10): 3.5 x 6.7 x 13.4 in, 9.9 lb, recommended minimum bank 120Ah
Installation Considerations
Follow the current model-specific Xantrex installation manual and applicable marine electrical standards. Confirm mounting location, ventilation, environmental limits, conductor sizing, overcurrent protection and grounding requirements with a qualified marine electrical installer. Accessories are sold separately unless identified in the included components below.
What’s Included
- TRUEcharge3 battery charger (model per selection)
- Owner's guide
| Brand | Xantrex |
| Model | 804-1240-10 (40A), 804-1260-10 (60A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 40A / 60A |
| Outputs | 3 (Three Positive, One Negative Terminal) |
| Charge Voltage | 14.2-15.5 VDC (Depending on Settings) |
| Float Voltage | 13.4-13.8 VDC |
| Equalize | 16V |
| Charge Stages | Automatic 3-Stage |
| Battery Types | Gel, Flooded, AGM, Lithium-Ion |
| Temperature Compensation | Three Settings |
| AC Input | 90-265 VAC, 47-63 Hz (120/230/240V Nominal) |
| Power Factor | Power Factor Corrected |
| Efficiency | Over 80% |
| Minimum Recommended Bank | 80Ah / 120Ah |
| Parallel Stacking | Up to 2 Chargers (Requires Remote Panel 808-8040-10) |
| Protection | Circuit Breaker, Reverse Polarity, DC Over-Voltage, Over-Temperature |
| Operating Temperature | 32°F to 140°F, Derates Above 104°F (40A) or 122°F (60A) |
| Storage Temperature | -40°F to 176°F |
| Ingress Protection | IP32 |
| Dimensions (H x W x L) | 40A: 2.8 x 6.7 x 9.8 in, 60A: 3.5 x 6.7 x 13.4 in |
| Weight | 4.8 lb / 9.9 lb |
| Certifications | CSA/UL 60335-2-29, UL1564, ABYC A-31, CE, FCC Class B, DOE/CEC Compliant |
| UPC | 804-1240-10: 715535920814 |
| Warranty | 5-Year Limited |
| Brand | Xantrex |
| Model | 804-1240-10 (40A), 804-1260-10 (60A) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 40A / 60A |
| Outputs | 3 (Three Positive, One Negative Terminal) |
| Charge Voltage | 14.2-15.5 VDC (Depending on Settings) |
| Float Voltage | 13.4-13.8 VDC |
| Equalize | 16V |
| Charge Stages | Automatic 3-Stage |
| Battery Types | Gel, Flooded, AGM, Lithium-Ion |
| Temperature Compensation | Three Settings |
| AC Input | 90-265 VAC, 47-63 Hz (120/230/240V Nominal) |
| Power Factor | Power Factor Corrected |
| Efficiency | Over 80% |
| Minimum Recommended Bank | 80Ah / 120Ah |
| Parallel Stacking | Up to 2 Chargers (Requires Remote Panel 808-8040-10) |
| Protection | Circuit Breaker, Reverse Polarity, DC Over-Voltage, Over-Temperature |
| Operating Temperature | 32°F to 140°F, Derates Above 104°F (40A) or 122°F (60A) |
| Storage Temperature | -40°F to 176°F |
| Ingress Protection | IP32 |
| Dimensions (H x W x L) | 40A: 2.8 x 6.7 x 9.8 in, 60A: 3.5 x 6.7 x 13.4 in |
| Weight | 4.8 lb / 9.9 lb |
| Certifications | CSA/UL 60335-2-29, UL1564, ABYC A-31, CE, FCC Class B, DOE/CEC Compliant |
| UPC | 804-1240-10: 715535920814 |
| Warranty | 5-Year Limited |