Balmar 621 Series 120A Marine Alternator Kit with MC-618, K6 or Dual Vee
- Complete 120A charging kit
- MC-618 smart regulator
- Fits 1in and 2in mounts
- K6 or dual vee pulley
- Output 120A, 12V
- Mount 1-2in Single Foot
- Regulator MC-618
- Warranty 2-Year Limited
Replace a tired stock alternator with a complete high-output charging system. The Balmar 621 Series 120A Alternator Kit pairs Balmar's compact 6-Series 120 amp alternator with the Max Charge MC-618 smart regulator, temperature sensors and mounting hardware, so you get fast, properly staged charging for your house batteries in one box. The single-foot spindle mount fits both 1" Motorola-style and 2" Delco-style brackets, covering a wide range of popular marine diesel and gas engines. Choose a K6 serpentine or dual vee pulley to match your belt drive.
- Output: 120A, 12V
- Mount: Single Foot (Spindle), 1" or 2"
- Regulator: Max Charge MC-618, Multi-Stage
- Pulley: K6 Serpentine or Dual Vee
Compact 6-Series Performance
The 6-Series is Balmar's compact small-case alternator family, delivering high output in a footprint close to the original equipment. Custom-wound rotors and stators, sealed heavy-duty bearings, dual internal cooling fans and a high-airflow cast aluminum case keep it running cool and reliable in a hot engine room.
Smart, Multi-Stage Charging
The included Balmar Max Charge MC-618 is a smart, multi-stage regulator with presets for flooded, AGM, gel, carbon foam, spiral-wound and LiFePO4 lithium batteries. Its included alternator and battery temperature sensors let it reduce output if the alternator runs hot and adjust charging voltage for battery temperature, and its Belt Load Manager and Small Engine Mode let you limit alternator load on smaller engines. Charging your batteries correctly helps them reach a full charge faster and last longer than with a basic internally regulated alternator.
Smart Ready Backup Regulation
Balmar's patented Smart Ready technology builds an internal 14.1V regulator into the alternator. If the external regulator is ever disconnected or fails, the alternator can still charge so you can get home.
Fits Popular Marine Engines
The 1" Motorola-style mount is typical for Westerbeke, Lehman, Hino and Pathfinder engines, and the 2" Delco-style mount is typical for Volvo Penta (gas and diesel), John Deere, Perkins, MerCruiser, PleasureCraft, Crusader, Indmar, Marine Power and other GM-based engines.
Choose Your Pulley
- K6 Serpentine (621-VUP-MC-120-K6): six-groove serpentine pulley for engines with a K6 multi-rib belt
- Dual Vee (621-VUP-MC-120-DV): deep dual vee pulley for engines with twin V-belts
Installation Notes
- Make sure your engine's belt drive can handle a 120A alternator; Balmar recommends an AltMount pulley conversion kit if a dual vee or serpentine belt is not already present
- Upgrade the alternator output cable and fuse to suit 120A before installation
- Mount the MC-618 regulator in a dry location away from direct engine heat
- Professional installation is recommended; Balmar warranty coverage requires installation by a qualified installer
What’s Included
- 1 x Balmar 621-120 alternator, 120A 12V, single foot (pulley per selection)
- 1 x Balmar Max Charge MC-618 voltage regulator with wiring harness
- Alternator and battery temperature sensors
- Mounting hardware
| Brand | Balmar |
| Part Numbers | 621-VUP-MC-120-K6, 621-VUP-MC-120-DV |
| Alternator Series | 6-Series (621) |
| Output | 120A |
| Voltage | 12V |
| Mounting | Single Foot Spindle, 1" Motorola or 2" Delco Style |
| Foot Bore | 1": 1/2" / 2": 3/8" |
| Pulley | K6 Serpentine or Dual Vee |
| Output at 2000 Alt RPM (Hot) | 60A |
| Output at 6000 Alt RPM (Hot) | 109A |
| Power Take-Off | 4.8 HP |
| Grounding | Isolated Ground |
| Internal Regulation | Smart Ready, 14.1V Backup |
| External Regulator | Max Charge MC-618 |
| Cooling | Dual Internal Fans, Ventilated Cast Aluminum Case |
| Bearings | Sealed Heavy-Duty Radial |
| Alternator Dimensions | 5.35" Dia x 5.08" L x 7.5" H |
| Compliance | USCG Title 33, ISO, SAE, CE |
| UPC | K6: 676205750950 / DV: 676205000550 |
| Warranty | 2-Year Limited |
| Brand | Balmar |
| Part Numbers | 621-VUP-MC-120-K6, 621-VUP-MC-120-DV |
| Alternator Series | 6-Series (621) |
| Output | 120A |
| Voltage | 12V |
| Mounting | Single Foot Spindle, 1" Motorola or 2" Delco Style |
| Foot Bore | 1": 1/2" / 2": 3/8" |
| Pulley | K6 Serpentine or Dual Vee |
| Output at 2000 Alt RPM (Hot) | 60A |
| Output at 6000 Alt RPM (Hot) | 109A |
| Power Take-Off | 4.8 HP |
| Grounding | Isolated Ground |
| Internal Regulation | Smart Ready, 14.1V Backup |
| External Regulator | Max Charge MC-618 |
| Cooling | Dual Internal Fans, Ventilated Cast Aluminum Case |
| Bearings | Sealed Heavy-Duty Radial |
| Alternator Dimensions | 5.35" Dia x 5.08" L x 7.5" H |
| Compliance | USCG Title 33, ISO, SAE, CE |
| UPC | K6: 676205750950 / DV: 676205000550 |
| Warranty | 2-Year Limited |