Dolphin Charger ProLite 12V 40A Marine Battery Charger, 4 Banks, IP55
- Four isolated 12V outputs
- LiFePO4 lithium ready
- Fanless IP55 housing
- Bluetooth app setup
- Output 12V 40A
- Banks 4 Isolated
- Water Rating IP55
- Warranty 2-Year Limited
The Dolphin Charger ProLite 12.40 is a 40 amp, four-bank on-board charger for boats with several 12V batteries to keep topped up, such as engine, house and multi-battery trolling motor systems. Its IP55 white polycarbonate housing is fanless and cooled by natural convection, so it runs silently and resists moisture and salt air, and it is ISO 8846 ignition protected. Four fully isolated outputs share the full 40 amps, with a 3-stage I-U-o-U algorithm and profiles for flooded, lead calcium, AGM, gel and LiFePO4 lithium batteries with BMS. Universal 115/230V input, built-in output fusing and Bluetooth setup through the Dolphin Connect app round out a charger that is ready to wire in.
- Output: 12V, 40A, 4 Isolated Banks
- Protection: IP55, ISO 8846 Ignition Protected
- Batteries: Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 + BMS
- Input: 115/230V AC, 50/60 Hz
Four Isolated Outputs
Charge up to four 12V batteries or banks independently from one charger. Isolated outputs prevent batteries at different states of charge from discharging into each other, and the charger is suited to total battery capacity of roughly 400 to 800 Ah.
Multi-Chemistry Charging
Selectable charging profiles cover open (flooded) lead acid, lead calcium, AGM and gel batteries, plus LiFePO4 lithium batteries with a battery management system (BMS), so one charger suits your batteries today and after a lithium upgrade. A 3-stage I-U-o-U algorithm brings batteries to full charge and then holds them at float, with output current held within ±5% and ripple under 1%.
Fanless and Weather-Resistant
The IP55 polycarbonate housing protects against dust and water spray, and natural convection cooling means there is no fan to draw in damp air or fail. It mounts vertically with four 1/4" screws.
Built-In Fusing
Maxi blade fuses on each positive output (4 x 50A) and the negative outputs (2 x 30A), plus an internal T10A AC input fuse, protect the wiring and the charger.
Bluetooth Setup
Set the battery type and monitor charging from your phone with the Dolphin Connect app, or use the front push button and tri-color LED status indicator.
Protection
AC input under-voltage, DC output short circuit, over-voltage, reverse polarity and over-temperature protection guard your batteries and the charger.
What’s Included
- ProLite 12.40 4-bank marine battery charger
- 6 ft AC power cable (16 AWG)
- 6 ft DC battery cables (8 AWG)
| Brand | Dolphin Charger |
| Model | 99240 (ProLite 12.40) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 40A (±5%) |
| Outputs | 4 Isolated |
| Recommended Battery Capacity | 400-800 Ah |
| AC Input | 115/230V AC ±10%, 50/60 Hz |
| Max Input Current | 8A at 115V, 4A at 230V |
| Power Factor | Over 0.9 |
| Efficiency | Over 91% |
| Charge Algorithm | 3-Stage I-U-o-U |
| Battery Types | Open Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 with BMS |
| Ripple | Under 1% |
| Fuses | AC Input T10A, DC+ 4 x 50A and DC- 2 x 30A Maxi Blade |
| Control | Front Push Button, Dolphin Connect App (Bluetooth) |
| Display | Tri-Color LED |
| Protection | AC Under-Voltage, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Humidity | 10-90% Non-Condensing |
| Water Rating | IP55 |
| Ignition Protection | ISO 8846 |
| Cooling | Natural Convection (Fanless) |
| Housing | White Polycarbonate |
| Mounting | Vertical, 4 x 1/4" Screws |
| Connections | AC 16 AWG 6 ft, DC 8 AWG 6 ft |
| Dimensions | 10.9 x 7.9 x 4 in |
| Weight | 10.8 lb |
| UPC | 786142992402 |
| Warranty | 2-Year Limited |
| Brand | Dolphin Charger |
| Model | 99240 (ProLite 12.40) |
| Type | On-Board Marine Battery Charger |
| Battery Voltage | 12V |
| Output Current | 40A (±5%) |
| Outputs | 4 Isolated |
| Recommended Battery Capacity | 400-800 Ah |
| AC Input | 115/230V AC ±10%, 50/60 Hz |
| Max Input Current | 8A at 115V, 4A at 230V |
| Power Factor | Over 0.9 |
| Efficiency | Over 91% |
| Charge Algorithm | 3-Stage I-U-o-U |
| Battery Types | Open Lead Acid, Lead Calcium, AGM/Gel, LiFePO4 with BMS |
| Ripple | Under 1% |
| Fuses | AC Input T10A, DC+ 4 x 50A and DC- 2 x 30A Maxi Blade |
| Control | Front Push Button, Dolphin Connect App (Bluetooth) |
| Display | Tri-Color LED |
| Protection | AC Under-Voltage, Short Circuit, Over-Voltage, Reverse Polarity, Over-Temperature |
| Humidity | 10-90% Non-Condensing |
| Water Rating | IP55 |
| Ignition Protection | ISO 8846 |
| Cooling | Natural Convection (Fanless) |
| Housing | White Polycarbonate |
| Mounting | Vertical, 4 x 1/4" Screws |
| Connections | AC 16 AWG 6 ft, DC 8 AWG 6 ft |
| Dimensions | 10.9 x 7.9 x 4 in |
| Weight | 10.8 lb |
| UPC | 786142992402 |
| Warranty | 2-Year Limited |