Faria Chesapeake SS 4-Gauge Outboard Gauge Set, White or Black
- Speed, tach, fuel & volts
- Matched Chesapeake style
- Stainless bezels, glass lens
- White or black dial
- Gauges 4 in Set
- Engine Gas Outboard
- Bezel Stainless Steel
- Warranty 3-Year Limited
Give your helm a matched, factory-finished look with the Faria Chesapeake SS Outboard Gauge Set. Each instrument has a perimeter-lighted dial with stylish blue and white graphics, a polished stainless steel bezel, a contoured white pointer and a domed glass lens, so the speedometer, tachometer, fuel and voltage gauges read clearly in bright sun and glow evenly at night. The four-gauge boxed set covers everything an outboard-powered boat needs, made by Faria Beede, an American gauge maker that has supplied boat builders for more than 60 years. Choose a white dial for a classic look or a black dial for a modern, low-glare dash.
- Gauges: 4: Speed, Tach, Fuel, Volts
- Application: Gas Outboard Motors
- Bezel: Polished Stainless Steel
- Dial: White or Black, Perimeter Lighted
Everything Your Dash Needs in One Box
Instead of matching gauges one at a time, this boxed set gives you a 60 MPH speedometer and 7000 RPM tachometer in 4" cases, plus 2" fuel level and voltmeter gauges, all from the same series so the faces, pointers and lighting match perfectly across the panel.
Clear in Any Light
Perimeter lighting illuminates the whole dial evenly instead of creating a hot spot in the middle, and the contoured pointer and high-contrast blue and white graphics make readings easy at a glance. Dual imperial and metric scales are printed on the speedometer and gauges where applicable.
Built for the Marine Environment
The domed glass lens resists scratching and sheds water, the polished stainless steel bezel holds its shine in salt air, and the gauges run on standard 12 VDC negative-ground systems. Faria offers matching Chesapeake SS trim, hourmeter and oil gauges, so it's easy to expand the dash later.
Choose Your Color
- White (KTF002): white dial with blue and white graphics and a polished stainless bezel
- Black (KTF004): black dial with blue and white graphics and a polished stainless bezel
Installation Notes
- 4" speedometer and tachometer need a 3-3/8" (85 mm) cutout; 2" fuel and voltmeter gauges need a 2-1/16" (53 mm) cutout
- The speedometer is a mechanical (pitot) gauge and connects to a pitot pickup and hose on the transom or lower unit
- The tachometer reads the ignition or alternator signal from a gas outboard; set the selector on the back to match your engine before running
- The fuel gauge works with standard American 240-33 ohm fuel senders
- Senders, pitot pickup, wiring harness and gauge covers are not included
Pairs Well With (Sold Separately)
- Faria Chesapeake SS 2" trim gauge, hourmeter or oil pressure gauge to complete your outboard dash
- Faria Chesapeake SS 5" GPS speedometer or 5" tachometer for a larger center display
What’s Included
- 1 x 4" speedometer, 0 to 60 MPH (mechanical/pitot)
- 1 x 4" tachometer, 0 to 7000 RPM
- 1 x 2" fuel level gauge (E-1/2-F)
- 1 x 2" voltmeter (10 to 16 VDC)
| Brand | Faria Beede Instruments |
| Part Numbers | KTF002 (White), KTF004 (Black) |
| Series | Chesapeake SS |
| Application | Gas Outboard Motors |
| Gauges Included | 4 |
| Speedometer | 4", 0-60 MPH, Mechanical (Pitot) |
| Tachometer | 4", 0-7000 RPM |
| Fuel Level | 2", E-1/2-F |
| Voltmeter | 2", 10-16 VDC |
| Cutout Size | 4" Gauges: 3-3/8" (85 mm) / 2" Gauges: 2-1/16" (53 mm) |
| Bezel | Polished Stainless Steel |
| Lens | Domed Glass, Scratch Resistant |
| Lighting | Perimeter Back Lighting |
| Electrical | 12 VDC Negative Ground |
| Box Dimensions | 21" x 10" x 6" |
| Shipping Weight | 4.3 lb |
| UPC | KTF002: 759266000025 / KTF004: 759266000049 |
| Warranty | 3-Year Limited |
| Brand | Faria Beede Instruments |
| Part Numbers | KTF002 (White), KTF004 (Black) |
| Series | Chesapeake SS |
| Application | Gas Outboard Motors |
| Gauges Included | 4 |
| Speedometer | 4", 0-60 MPH, Mechanical (Pitot) |
| Tachometer | 4", 0-7000 RPM |
| Fuel Level | 2", E-1/2-F |
| Voltmeter | 2", 10-16 VDC |
| Cutout Size | 4" Gauges: 3-3/8" (85 mm) / 2" Gauges: 2-1/16" (53 mm) |
| Bezel | Polished Stainless Steel |
| Lens | Domed Glass, Scratch Resistant |
| Lighting | Perimeter Back Lighting |
| Electrical | 12 VDC Negative Ground |
| Box Dimensions | 21" x 10" x 6" |
| Shipping Weight | 4.3 lb |
| UPC | KTF002: 759266000025 / KTF004: 759266000049 |
| Warranty | 3-Year Limited |