Rule S Series Electronic Sensing Automatic Bilge Pump - 500 to 1100 GPH, 12V or 24V
- No float switch needed
- Keeps bilge at 1/8-3/8 in
- Check valve included
- Compact automatic design
- Capacity 500 to 1100 GPH
- Operation Automatic Sensing
- Voltage 12V or 24V
- Warranty 3-Year Limited
Rule's S Series electronic sensing bilge pumps work on the principle of impeller resistance, so no float switch is needed. Every 2-1/2 minutes the pump runs for about one second to check for water. If water is present, it senses the resistance and keeps running until the water is removed, then goes back to checking. The result is a bilge kept between roughly 1/8 in and 3/8 in of water, in what Rule describes as the smallest automatic pumps on the market. They are a smart choice where space and power conservation matter, with a check valve, electromagnetic suppression and a built-in thermal cell included.
- Capacity: 500, 800 or 1100 GPH
- Operation: Automatic with Manual Override
- Sensing: Impeller Resistance, No Float Switch
- Included: Backflow Preventer Check Valve
How Electronic Sensing Works
Instead of a float or a field sensor, the pump briefly spins its impeller every 2-1/2 minutes. When it feels the resistance of water, it keeps pumping until the bilge is down to between about 1/8 in and 3/8 in.
Small Footprint
These compact pumps fit tight bilges in smaller boats, sailboats and secondary compartments where a pump with a separate float switch will not fit.
Protection Built In
- Check valve included, with a hidden air vent to prevent air-locking
- True electromagnetic suppression (EMC)
- Built-in thermal cell protects the pump and vessel when things get too hot
- Submersible and ignition protected
- High-efficiency, low-amp motor
- Stainless steel shaft
Manual Override
The pumps are completely automatic but can also be switched on manually from a panel switch when you want to run them on demand.
Choose Your Model
- 25SA: 500 GPH, 12V
- 25SA-24: 500 GPH, 24V
- 20SA: 800 GPH, 12V
- 27SA: 1100 GPH, 12V
- 27SA-24: 1100 GPH, 24V
About Pump Ratings
Rule rates pump capacity at open flow, with no hose or lift; the actual output on your boat is lower once discharge hose, fittings, height and battery voltage are taken into account.
What’s Included
- Rule S Series electronic sensing bilge pump
- Backflow preventer check valve
| Brand | Rule |
| Models | 25SA, 25SA-24, 20SA, 27SA, 27SA-24 |
| Type | Electronic Sensing Automatic Submersible Bilge Pump |
| Capacity (Open Flow) | 500, 800 or 1100 GPH |
| Voltage | 12V DC or 24V DC |
| Sensing Interval | Every 2-1/2 Minutes for About 1 Second |
| Water Level Maintained | Approx. 1/8 in to 3/8 in |
| Float Switch | Not Required |
| Manual Override | Yes |
| Shaft | Stainless Steel |
| Ignition Protected | Yes |
| Shipping Weight | 0.8 to 1.2 lb |
| UPC | 25SA: 042237104786; 25SA-24: 042237104793; 20SA: 042237104779; 27SA: 042237104809; 27SA-24: 042237104816 |
| Warranty | 3-Year Limited |
| Brand | Rule |
| Models | 25SA, 25SA-24, 20SA, 27SA, 27SA-24 |
| Type | Electronic Sensing Automatic Submersible Bilge Pump |
| Capacity (Open Flow) | 500, 800 or 1100 GPH |
| Voltage | 12V DC or 24V DC |
| Sensing Interval | Every 2-1/2 Minutes for About 1 Second |
| Water Level Maintained | Approx. 1/8 in to 3/8 in |
| Float Switch | Not Required |
| Manual Override | Yes |
| Shaft | Stainless Steel |
| Ignition Protected | Yes |
| Shipping Weight | 0.8 to 1.2 lb |
| UPC | 25SA: 042237104786; 25SA-24: 042237104793; 20SA: 042237104779; 27SA: 042237104809; 27SA-24: 042237104816 |
| Warranty | 3-Year Limited |