Free U.S. Shipping $99+More gear. No extra shipping cost.
Authorized DealerGenuine products. Trusted brands.
Manufacturer WarrantyProtection for your purchase.
Expert Marine SupportReal boaters. Real advice.
Rule 500 GPH electronic sensing bilge pump 12V 25SA

Rule S Series Electronic Sensing Automatic Bilge Pump - 500 to 1100 GPH, 12V or 24V

500 GPH 12V (25SA)
$121.99
Skip to product information
Rule 500 GPH electronic sensing bilge pump 12V 25SA
Rule Authorized Dealer

Rule S Series Electronic Sensing Automatic Bilge Pump - 500 to 1100 GPH, 12V or 24V

SKU RUL-25SA
$121.99
  • No float switch needed
  • Keeps bilge at 1/8-3/8 in
  • Check valve included
  • Compact automatic design
View More Details
Arrives in 3-5 Business DaysFast & tracked
3 Year WarrantyManufacturer
Free ShippingOn every order
Best Price GuaranteeFound it cheaper?
Secure PaymentEncrypted checkout
Expert SupportReal Human Help
  • Capacity 500 to 1100 GPH
  • Operation Automatic Sensing
  • Voltage 12V or 24V
  • Warranty 3-Year Limited

Rule's S Series electronic sensing bilge pumps work on the principle of impeller resistance, so no float switch is needed. Every 2-1/2 minutes the pump runs for about one second to check for water. If water is present, it senses the resistance and keeps running until the water is removed, then goes back to checking. The result is a bilge kept between roughly 1/8 in and 3/8 in of water, in what Rule describes as the smallest automatic pumps on the market. They are a smart choice where space and power conservation matter, with a check valve, electromagnetic suppression and a built-in thermal cell included.

  • Capacity: 500, 800 or 1100 GPH
  • Operation: Automatic with Manual Override
  • Sensing: Impeller Resistance, No Float Switch
  • Included: Backflow Preventer Check Valve

How Electronic Sensing Works

Instead of a float or a field sensor, the pump briefly spins its impeller every 2-1/2 minutes. When it feels the resistance of water, it keeps pumping until the bilge is down to between about 1/8 in and 3/8 in.

Small Footprint

These compact pumps fit tight bilges in smaller boats, sailboats and secondary compartments where a pump with a separate float switch will not fit.

Protection Built In

  • Check valve included, with a hidden air vent to prevent air-locking
  • True electromagnetic suppression (EMC)
  • Built-in thermal cell protects the pump and vessel when things get too hot
  • Submersible and ignition protected
  • High-efficiency, low-amp motor
  • Stainless steel shaft

Manual Override

The pumps are completely automatic but can also be switched on manually from a panel switch when you want to run them on demand.

Choose Your Model

  • 25SA: 500 GPH, 12V
  • 25SA-24: 500 GPH, 24V
  • 20SA: 800 GPH, 12V
  • 27SA: 1100 GPH, 12V
  • 27SA-24: 1100 GPH, 24V

About Pump Ratings

Rule rates pump capacity at open flow, with no hose or lift; the actual output on your boat is lower once discharge hose, fittings, height and battery voltage are taken into account.

What’s Included

  • Rule S Series electronic sensing bilge pump
  • Backflow preventer check valve
Brand Rule
Models 25SA, 25SA-24, 20SA, 27SA, 27SA-24
Type Electronic Sensing Automatic Submersible Bilge Pump
Capacity (Open Flow) 500, 800 or 1100 GPH
Voltage 12V DC or 24V DC
Sensing Interval Every 2-1/2 Minutes for About 1 Second
Water Level Maintained Approx. 1/8 in to 3/8 in
Float Switch Not Required
Manual Override Yes
Shaft Stainless Steel
Ignition Protected Yes
Shipping Weight 0.8 to 1.2 lb
UPC 25SA: 042237104786; 25SA-24: 042237104793; 20SA: 042237104779; 27SA: 042237104809; 27SA-24: 042237104816
Warranty 3-Year Limited

You may also like

Recently viewed