SurfStow SUPRAX SUP Storage Rack System - Single Board, Rail Mount, Aluminum
- Stores one SUP on the rail
- Anodized 6061 aluminum racks
- EVA foam and shock cords
- Mounts on angled stanchions
- Capacity 1 SUP
- Material Anodized Aluminum
- Rails 7/8, 1 and 1-1/4 in
- Warranty 1-Year Limited
Keep your paddleboard ready for the next anchorage without letting it take over your boat. The SurfStow SUPRAX 50050-2 is a complete single-board storage system for compatible tubular boat rails and stanchions. Two anodized aluminum cradles support the board on shaped EVA padding, while integrated heavy-duty shock cords retain it in the rack. Four adjustable clamps and fitting adapters accommodate 7/8-inch, 1-inch and 1-1/4-inch rails, according to Waterbrands' current product specifications. Ideal for recreational cruising and days at anchor, the system keeps bulky paddlesports gear organized while preserving valuable cockpit and deck space. An optional expansion kit lets you carry a second SUP as your needs grow.
- Capacity: One Stand-Up Paddleboard
- Construction: Sandblasted Anodized 6061 Aluminum, EVA Foam
- Rails: Fits 7/8 in, 1 in and 1-1/4 in Rails
- Mounting: Rotating Clamps for Straight Rails or Angled Stanchions
Check Fit Before You Buy
Measure the outside diameter of your tubular rail and identify two suitable mounting locations. Adjustable clamps accommodate angled stanchions as well as straight rails, but rail strength, spacing and clearance still matter. For fully square pontoon rails, choose the dedicated 50053 pontoon system instead.
A More Organized Day on the Water
Dedicated padded supports help avoid unnecessary contact between the board and hard boat surfaces. With the SUP stored alongside the vessel, passengers have more room to move and the board remains accessible when it is time to paddle.
Free Up Deck Space
Stores your SUP upright against the rail of your boat instead of across the deck or cockpit, so there is more room for passengers and gear and less risk of tripping over or damaging the board.
Board-Friendly Support
Each rack is lined with heat-pressed, die-cut EVA foam that cushions the board and helps protect the board’s contact surfaces from abrasion.
Secure Hold
Heavy-duty shock cords wrap over the board and help retain it in the cradles.
Fits Most Rails and Stanchions
Four articulating clamps attach to 7/8 in, 1 in and 1-1/4 in rails using the included fitting adapters. The rotating clamp lets you mount the racks on angled stanchions as well as straight rails.
Corrosion-Resistant Construction
Racks are made from 6061 aluminum alloy with a sandblasted, anodized finish for strength and long life on the water.
Expandable
Add the SUPRAX Dual Board Add-On (50051) to carry a second board on the same racks.
Installation and Use
Follow the manufacturer’s installation instructions, inspect the mounting hardware and retention cords before departure, and verify that the equipment is secure and does not obstruct navigation or boarding. Remove the load if conditions or clearances make carrying it unsafe.
What’s Included
- 2 x mounting racks (anodized 6061 aluminum with EVA foam)
- 4 x articulating rail clamps
- Fitting adapters for supported rail diameters
- Heavy-duty shock cords
- Mounting hardware and installation tools
| Brand | SurfStow |
| Model | 50050-2 |
| Type | Boat Rail-Mount SUP Storage Rack |
| Capacity | 1 Stand-Up Paddleboard (Expandable to 2 with 50051) |
| Rack Material | 6061 Aluminum Alloy, Sandblasted Anodized |
| Padding | Heat-Pressed, Die-Cut EVA Foam |
| Board Retention | Heavy-Duty Shock Cords |
| Rail Compatibility | 7/8 in, 1 in and 1-1/4 in Rails |
| Clamps | 4 Articulating Clamps, Rotating for Angled Stanchions |
| Mounting Options | Boat Rails, Stanchions or Wall |
| Package Dimensions | 26 x 11 x 4 in |
| UPC | 814154015540 |
| Warranty | 1-Year Limited |
| Brand | SurfStow |
| Model | 50050-2 |
| Type | Boat Rail-Mount SUP Storage Rack |
| Capacity | 1 Stand-Up Paddleboard (Expandable to 2 with 50051) |
| Rack Material | 6061 Aluminum Alloy, Sandblasted Anodized |
| Padding | Heat-Pressed, Die-Cut EVA Foam |
| Board Retention | Heavy-Duty Shock Cords |
| Rail Compatibility | 7/8 in, 1 in and 1-1/4 in Rails |
| Clamps | 4 Articulating Clamps, Rotating for Angled Stanchions |
| Mounting Options | Boat Rails, Stanchions or Wall |
| Package Dimensions | 26 x 11 x 4 in |
| UPC | 814154015540 |
| Warranty | 1-Year Limited |