T-H Marine ATLAS Digital Jack Plate Gauge Kit, 6", 10", 12" & 14", Stainless Steel Bezel
- Fits ATLAS 6", 10", 12" & 14"
- Digital LED, 1/4" steps
- Stainless Steel bezel
- Pre-drilled, complete kit
- Fits ATLAS 6", 10", 12" & 14" Jack Plates
- Readout Digital LED, 0 to 20
- Resolution 1/4 in per Number
- Bezel Stainless Steel Bezel
The T-H Marine ATLAS® Digital Position Gauge Kit shows exactly where your jack plate is, in real time, on a bright digital LED readout. This kit fits 6”, 10”, 12” & 14” ATLAS® hydraulic jack plates and has a stainless steel bezel. Every ATLAS plate is pre-drilled for the sensor, so installation is straightforward, and you can return to your fastest, shallowest or best-holeshot setting every time.
- Fits: ATLAS® 6”, 10”, 12” & 14” Jack Plates
- Readout: Digital LED, 0 to 20
- Resolution: 1/4” per Number
- Bezel: Stainless Steel Bezel
Know Your Engine Height at a Glance
The all-digital readout counts from 0 to 20, and each number equals 1/4” of rise. Find your hull’s sweet spot once, then return to it every time instead of guessing by eye.
Dial In Performance
Run higher for top-end speed and fuel efficiency, lower for a stronger holeshot, or all the way up for shallow water. The gauge turns your ATLAS jack plate into a precise tuning tool.
Pre-Drilled ATLAS Fit
All ATLAS jack plates are pre-drilled for the position sensor, so installation is simple. This kit is sized for 6”, 10”, 12” & 14” ATLAS models. A separate kit covers the other ATLAS sizes.
Complete Kit
The kit includes the flat sensor unit with 20’ of two-conductor cable, the magnet sensor bracket, the LED gauge and stainless steel mounting screws. It adds a height display to the standard rocker switch that comes with ATLAS jack plates.
Not for the Micro Jacker
This gauge does not fit the ATLAS® Micro Jacker.
What’s Included
- 1 × ATLAS® digital LED position gauge with stainless steel bezel and 6” leads
- 1 × flat sensor unit with 20’ two-conductor cable
- 1 × 90° magnet sensor bracket
- Stainless steel #10-32 mounting screws
Buying and Setup Notes
Verify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.
| Brand | T-H Marine |
| Model | ATLAS® Digital Position Gauge Kit |
| Part Number | FAGK-2SS-DP |
| Compatible With | ATLAS® 6”, 10”, 12” & 14” Hydraulic Jack Plates |
| Not Compatible With | ATLAS® Micro Jacker |
| Display | Digital LED |
| Scale | 0 to 20 |
| Resolution | 1/4” Rise per Number |
| Bezel | Stainless Steel Bezel |
| Sensor Cable | 20’ Two-Conductor |
| UPC | 733572074352 |
| Warranty | 1 Year Limited |
| Brand | T-H Marine |
| Model | ATLAS® Digital Position Gauge Kit |
| Part Number | FAGK-2SS-DP |
| Compatible With | ATLAS® 6”, 10”, 12” & 14” Hydraulic Jack Plates |
| Not Compatible With | ATLAS® Micro Jacker |
| Display | Digital LED |
| Scale | 0 to 20 |
| Resolution | 1/4” Rise per Number |
| Bezel | Stainless Steel Bezel |
| Sensor Cable | 20’ Two-Conductor |
| UPC | 733572074352 |
| Warranty | 1 Year Limited |