T-H Marine Z-Lock 12" Setback Manual Jack Plate, Up to 300 HP
- 12" setback, 5" of lift
- Z-Lock stops side slippage
- Up to 300 HP outboards
- 1/2" aircraft aluminum
- Setback 12 in
- Vertical Adjustment 5 in
- Motor Rating V6 & V8 up to 300 HP
- Material 1/2 in Aircraft Aluminum
The T-H Marine Z-Lock™ 12” Setback Manual Jack Plate gives your outboard the maximum 12" setback and 5” of vertical adjustment in a rock-solid manual design. Built from full 1/2” aircraft-grade aluminum and rated for V6 and V8 outboards up to 300 HP, it lets you dial in engine height for a better holeshot, more top-end speed and shallow-water confidence, without the cost and complexity of hydraulics.
- Setback: 12”
- Vertical Adjustment: 5”
- Motor Rating: Up to 300 HP
- Material: 1/2” Aircraft-Grade Aluminum
Z-Lock Design Stops Side Slippage
Matching slotted extrusions lock the side plates together, so the plate cannot slip or shift sideways under load. It is the upgrade that carries on T-H Marine’s proven HI-JACKER™ jack plate series.
Why a 12” Setback
The 12" setback is the longest in the Z-Lock line. It delivers maximum leverage for performance hulls that need a strong holeshot and top-end speed, all without the weight and cost of a hydraulic system.
Single-Bolt Adjustment From the Top
Engine height adjusts from the top of the jack with a single wrench, so you can raise or lower the motor evenly and quickly when you are tuning the boat.
5” of Vertical Adjustment
Raise the outboard to reduce drag and run shallower, or lower it for maximum bite in rough water. Find the height where your hull performs best, then set it and forget it.
Built for Big Motors
Full 1/2” aircraft-grade aluminum gives the strength to handle V6 and V8 outboards up to 300 HP in freshwater and saltwater.
Choose the Right Setback
Talk to your boat manufacturer or local dealer about the recommended setback for your hull and how a jack plate will affect your boat before you order.
What’s Included
- 1 × T-H Marine Z-Lock™ 12” Setback Manual Jack Plate (JPZ-12-DP)
Buying and Setup Notes
Verify the exact engine, transom and hardware fitment before purchasing. Check setback, horsepower rating, mounting clearance and steering or rigging travel; installation affects the transom and should follow the manufacturer's instructions. Have critical steering or throttle installations checked for safe operation.
| Brand | T-H Marine |
| Model | Z-Lock™ Manual Jack Plate - 12” Setback |
| Part Number | JPZ-12-DP |
| Type | Manual, Single Adjust |
| Setback | 12” |
| Vertical Adjustment | 5” |
| Adjustment | Single Bolt, From Top of Jack |
| Material | 1/2” Aircraft-Grade Aluminum |
| Motor Rating | V6 & V8 Outboards up to 300 HP |
| Finish | Polished Aluminum |
| UPC | 733572080650 |
| Warranty | 1 Year Limited |
| Brand | T-H Marine |
| Model | Z-Lock™ Manual Jack Plate - 12” Setback |
| Part Number | JPZ-12-DP |
| Type | Manual, Single Adjust |
| Setback | 12” |
| Vertical Adjustment | 5” |
| Adjustment | Single Bolt, From Top of Jack |
| Material | 1/2” Aircraft-Grade Aluminum |
| Motor Rating | V6 & V8 Outboards up to 300 HP |
| Finish | Polished Aluminum |
| UPC | 733572080650 |
| Warranty | 1 Year Limited |