TACO Marine Grand Slam 960 Electric Masthead Anchor Light
- USCG 3 nm anchor light
- Push-button raise/lower
- Low-draw Cree LEDs
- Polished stainless body
- Visibility USCG 3 nm
- Boats Up to 39 ft
- Power 12V DC
- Warranty 1-Year Limited
Raise your all-around anchor and stern light at the push of a button, and lower it again for covers, bridges and storage. The TACO Marine Grand Slam 960 builds on the GS-950 with a polished stainless-steel body, a Type-316L stainless breakaway pin and a new anti-backlash stainless linear screw drive. Certified for the USCG 3-nautical-mile visibility requirement on powered vessels up to 39 feet, it uses Cree LED chips on low-draw drivers and installs cleanly to the hardtop with hidden wiring. Made in the USA.
- Visibility: USCG 3 nm, Boats up to 39'
- Compliance: NMMA/ABYC C-5, NMMA Type Accepted
- Light: Cree LED, 0.6 A per Light
- Operation: 12V Push-Button Lift & Lower
Compliant and Bright
The GS-960 is certified to meet the USCG requirement for 3-nautical-mile visibility on powered vessels up to 39' (12 m), meets NMMA/ABYC C-5 standards and is an NMMA Type Accepted product, so you can anchor out with confidence.
Efficient LED Lighting
Four 3-watt Cree LED chips run on two Mean Well drivers, providing a 5-watt stern light and a 10-watt anchor light while drawing only about 0.6 amps per light.
Built to Outlast the Weather
A polished stainless body with a mirrored finish, a Type-316L breakaway pin, a stainless threaded screw drive, a high-torque anti-backlash ball-bearing motor and oil-lite bronze bushings deliver smooth, reliable lift and descent season after season.
Push-Button or Manual
Auto-rotating stop and manual stop options make raising the light simple, and if power is lost the integrated nylon knob on the breakaway pin lets you operate it by hand.
Clean Installation
The Electronic Control Module uses an industry-standard On-Off-On control switch with a 5A fuse, and a 12" lead with a water-sealed Deutsch connector exits the base. The unit mounts to the surface of the hardtop, fits all top thicknesses, needs no under-mount clearance and uses the same hole pattern as the GS-950 for easy upgrades.
Recommended Add-Ons (Sold Separately)
- TACO Wedge Plate for GS-860 & GS-960 (WP-860-960WHA) for arched tops
- TACO Grand Slam 860 Electric VHF Antenna Mount for a matching antenna setup
What’s Included
- 1 x Grand Slam 960 electric mount
- Heavy-duty anodized aluminum light tube with LED masthead/anchor light
- Electronic Control Module (ECM) with 5A fuse
- 12" lead with water-sealed Deutsch connector
| Brand | TACO Marine |
| Part Number | GS-960 |
| Quantity | Each |
| Visibility | 3 Nautical Miles (USCG) |
| Vessel Size | Powered Vessels up to 39' (12 m) |
| Standards | NMMA/ABYC C-5, NMMA Type Accepted |
| LEDs | 4 x 3W Cree Chips, 2 Mean Well Drivers |
| Light Output | 5W Stern, 10W Anchor |
| Current Draw | 0.6 A per Light |
| Power | 12V DC |
| Control | ECM, On-Off-On Switch Control, 5A Fuse |
| Wiring | 12" Lead, 18 AWG, Deutsch Connector; 6" 20 AWG Light Lead |
| Body | Polished Stainless Steel, Mirrored Finish |
| Light Tube | Heavy-Duty Anodized Aluminum |
| Weight | 7.2 lb |
| Made In | USA |
| UPC | 631378093747 |
| Warranty | 1-Year Limited |
| Brand | TACO Marine |
| Part Number | GS-960 |
| Quantity | Each |
| Visibility | 3 Nautical Miles (USCG) |
| Vessel Size | Powered Vessels up to 39' (12 m) |
| Standards | NMMA/ABYC C-5, NMMA Type Accepted |
| LEDs | 4 x 3W Cree Chips, 2 Mean Well Drivers |
| Light Output | 5W Stern, 10W Anchor |
| Current Draw | 0.6 A per Light |
| Power | 12V DC |
| Control | ECM, On-Off-On Switch Control, 5A Fuse |
| Wiring | 12" Lead, 18 AWG, Deutsch Connector; 6" 20 AWG Light Lead |
| Body | Polished Stainless Steel, Mirrored Finish |
| Light Tube | Heavy-Duty Anodized Aluminum |
| Weight | 7.2 lb |
| Made In | USA |
| UPC | 631378093747 |
| Warranty | 1-Year Limited |