Victron Energy Multi HS19 Solar 15k, 3-Phase Inverter/Charger, 4 MPPT, 19" Rack
- 15 kVA three-phase output
- 4 MPPT, up to 32 kW PV
- 650-1000 V HV batteries
- Up to 98% efficiency
- Inverter 15 kVA Three-Phase
- Solar 4 MPPT, Up to 32 kW
- Battery 650-1000 V HV
- Efficiency Up to 98%
The Victron Energy Multi HS19 Solar 15k is a high-voltage, three-phase inverter/charger with four built-in solar MPPT trackers, all in a single 19-inch rack unit. Built for 650–1000 V battery systems, it delivers 15 kVA of three-phase power and up to 32 kW of solar input at up to 98% efficiency. It is designed for large homes, commercial sites, off-grid estates and backup power.
- Inverter: 15 kVA Three-Phase
- Solar: 4 MPPT, Up to 32 kW
- Battery: 650–1000 V HV
- Efficiency: Up to 98%
High-Voltage Efficiency
Running at 650–1000 V cuts current dramatically, which means thinner cables, lower losses and more compact systems. Combined with high-frequency technology, the Multi HS19 reaches up to 98% inverter efficiency.
Three-Phase Power from One Unit
A single Multi HS19 supplies full three-phase output at 15 kW continuous up to 40°C, with 22 kW of peak power for 5 seconds to start heavy loads.
Four MPPT Solar Trackers
Four independent MPPT trackers rated at 8 kW each accept up to 32 kW of PV, with PV input up to 1000 VDC. That gives you room for large, multi-orientation arrays without extra charge controllers.
Fits a Standard 19-Inch Rack
The Multi HS19 slides into the same standard 19-inch rack as compatible high-voltage batteries, keeping the complete system in one enclosure for a cleaner, faster install.
High-Voltage Battery Charging
It supports managed CAN-bus high-voltage batteries from 650 to 1000 V, charging at up to 41 A, or roughly 33 kW at 800 V.
Off-Grid, Backup, Peak-Shaving and Grid-Tied
PowerControl and PowerAssist, a 32 A transfer switch and ESS compatibility let the Multi HS19 run off-grid, backup, peak-shaving and grid-tied self-consumption systems.
Part of the Victron Ecosystem
Configure and monitor over Bluetooth with VictronConnect, or connect a Victron GX device for remote monitoring and control via the VRM Portal.
What’s Included
- 1 × Victron Multi HS19 Solar 15k (PMR803150300)
Buying and Setup Notes
Plan this component as part of a complete, correctly protected electrical system. Check AC voltage and frequency, battery-bank voltage, current ratings, transfer-switch limits and system earthing before installation. High-current DC and mains-voltage work should be designed and installed by qualified personnel using the official installation manual.
| Brand | Victron Energy |
| Model | Multi HS19 Solar 15k |
| Part Number | PMR803150300 |
| Battery Voltage | 650–1000 V (Managed CAN-Bus HV Batteries) |
| Output | 400 VAC ± 10%, Three-Phase, 50/60 Hz |
| Continuous Output | 15,000 VA / 15 kW up to 40°C |
| Peak Power | 22 kW (5 s) |
| Continuous AC Current per Phase | 22 A |
| Max Battery Charge Current | 41 A |
| Transfer Switch | 32 A |
| PowerControl / PowerAssist | Yes |
| MPPT Trackers | 4 × 8 kW |
| Max PV Power | 32 kW |
| Max PV Voltage | 1000 VDC |
| Max Inverter Efficiency | Up to 98% |
| Communication | Bluetooth (VictronConnect), VE.Can, GX/VRM |
| Form Factor | 19-Inch Rack-Mount |
| Ingress Protection | IP20 |
| Dimensions (H × W × D) | 177.8 × 482.6 × 700 mm (7.0 × 19.0 × 27.6”) |
| Weight | 26.5 kg (58.4 lb) |
| UPC / EAN | 8719076058410 |
| Warranty | 5 Years |
| Brand | Victron Energy |
| Model | Multi HS19 Solar 15k |
| Part Number | PMR803150300 |
| Battery Voltage | 650–1000 V (Managed CAN-Bus HV Batteries) |
| Output | 400 VAC ± 10%, Three-Phase, 50/60 Hz |
| Continuous Output | 15,000 VA / 15 kW up to 40°C |
| Peak Power | 22 kW (5 s) |
| Continuous AC Current per Phase | 22 A |
| Max Battery Charge Current | 41 A |
| Transfer Switch | 32 A |
| PowerControl / PowerAssist | Yes |
| MPPT Trackers | 4 × 8 kW |
| Max PV Power | 32 kW |
| Max PV Voltage | 1000 VDC |
| Max Inverter Efficiency | Up to 98% |
| Communication | Bluetooth (VictronConnect), VE.Can, GX/VRM |
| Form Factor | 19-Inch Rack-Mount |
| Ingress Protection | IP20 |
| Dimensions (H × W × D) | 177.8 × 482.6 × 700 mm (7.0 × 19.0 × 27.6”) |
| Weight | 26.5 kg (58.4 lb) |
| UPC / EAN | 8719076058410 |
| Warranty | 5 Years |