Xantrex PROwatt SW 12V True Sine Wave Inverter, SW1000 or SW2000
- True sine wave output
- Dual GFCI outlets plus USB
- Digital volts and watts display
- Optional remote and transfer relay
- Output 900W or 1800W
- Outlets Dual GFCI
- Input 12V DC
- Warranty 2-Year Limited
Run compatible AC equipment from your 12V battery bank without installing a dedicated hardwired AC distribution system. The Xantrex PROwatt SW combines true sine wave power with onboard GFCI receptacles, a convenient USB port and a front-panel digital display. Choose the SW1000 for 900W continuous output or the SW2000 for 1800W continuous output. Both models are suited to boaters and RV owners who prefer direct plug-in power for appropriately sized electronics and appliances.
- Output: 900W or 1800W Continuous, True Sine Wave
- Surge: 2000W or 3000W Peak
- Outlets: Dual GFCI and USB 5V/500mA
- Display: DC Volts, AC Watts, Error Codes
Choose by Continuous Power, Not Model Name
The SW1000 delivers 900W continuously, while the SW2000 delivers 1800W continuously. Add together the running wattage of equipment you expect to use at the same time, then check startup surges and individual receptacle limits. Do not size an inverter solely by its peak rating.
Standalone Inverter or Integrated System?
The PROwatt SW is an inverter, not a battery charger. Its plug-in AC outlets are useful for individual appliances; installations requiring automatic shore-power transfer may need the optional compatible transfer relay. A properly engineered DC battery connection is required in either case.
True Sine Wave Power
Output is true sine wave at 120V nominal (104-127 VAC) and 60 Hz, so sensitive electronics, chargers, variable-speed tools and audio equipment run cleanly. Optimum efficiency is 90%.
Ready to Plug In
Dual GFCI receptacles provide shock protection at the outlet, and a Type A USB port (5V / 500mA) charges phones and small devices. DC connections are hardwired to the battery.
Digital Display
The front display shows DC battery voltage, AC output power and error codes, so you can see at a glance how much power you are using and how your battery is holding up.
Battery Protection
A low-battery alarm sounds at about 11V and the inverter shuts down at about 10.5V to protect your batteries, with over-voltage shutdown at about 15V. No-load draw is under 0.6A (SW1000) or 0.8A (SW2000).
Expand the System
Add the PROwatt SW remote panel (808-9001) for on/off control and ignition control via a 12V signal, or the PROwatt SW inline transfer relay (808-0915) for automatic AC transfer and hardwired AC output.
Choose Your Model
- SW1000 (806-1210): 900W continuous, 2000W surge, 150A recommended DC fuse, 7.2 lb
- SW2000 (806-1220): 1800W continuous, 3000W surge, 250A recommended DC fuse, 10.7 lb
Installation Considerations
Follow the current model-specific Xantrex installation manual and applicable marine electrical standards. Confirm mounting location, ventilation, environmental limits, conductor sizing, overcurrent protection and grounding requirements with a qualified marine electrical installer. Accessories are sold separately unless identified in the included components below.
What’s Included
- PROwatt SW inverter (model per selection)
- Owner's guide
| Brand | Xantrex |
| Model | 806-1210 (SW1000), 806-1220 (SW2000) |
| Type | True Sine Wave Inverter |
| DC Input | 12V Nominal, 10.5-15.5 VDC Range |
| Continuous Output | 900W / 1800W |
| Surge (Peak) | 2000W / 3000W |
| AC Output | 104-127 VAC, 60 ±0.5 Hz |
| Waveform | True Sine Wave |
| Optimum Efficiency | 90% |
| No-Load Draw | Under 0.6A / Under 0.8A |
| AC Receptacles | Dual GFCI |
| USB | 1 x Type A, 5V / 500mA |
| DC Connection | Hardwire |
| Recommended DC Fuse | 150A / 250A |
| Display | DC Voltage, AC Output Power, Error Codes |
| Operating Temperature | 32°F to 104°F |
| Dimensions (H x W x L) | SW1000: 3.5 x 8.7 x 13.4 in, SW2000: 3.9 x 11.8 x 13.7 in |
| Weight | 7.2 lb / 10.7 lb |
| Safety | UL458 with Marine Supplement, CSA 107.1 |
| EMC | FCC Part 15 Class A |
| Optional Accessories | Remote Panel 808-9001, Inline Transfer Relay 808-0915 |
| Warranty | 2-Year Limited |
| Brand | Xantrex |
| Model | 806-1210 (SW1000), 806-1220 (SW2000) |
| Type | True Sine Wave Inverter |
| DC Input | 12V Nominal, 10.5-15.5 VDC Range |
| Continuous Output | 900W / 1800W |
| Surge (Peak) | 2000W / 3000W |
| AC Output | 104-127 VAC, 60 ±0.5 Hz |
| Waveform | True Sine Wave |
| Optimum Efficiency | 90% |
| No-Load Draw | Under 0.6A / Under 0.8A |
| AC Receptacles | Dual GFCI |
| USB | 1 x Type A, 5V / 500mA |
| DC Connection | Hardwire |
| Recommended DC Fuse | 150A / 250A |
| Display | DC Voltage, AC Output Power, Error Codes |
| Operating Temperature | 32°F to 104°F |
| Dimensions (H x W x L) | SW1000: 3.5 x 8.7 x 13.4 in, SW2000: 3.9 x 11.8 x 13.7 in |
| Weight | 7.2 lb / 10.7 lb |
| Safety | UL458 with Marine Supplement, CSA 107.1 |
| EMC | FCC Part 15 Class A |
| Optional Accessories | Remote Panel 808-9001, Inline Transfer Relay 808-0915 |
| Warranty | 2-Year Limited |